Stiskalnica za bale

HSM 500.2 VL, 500.3 VL

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Blsdpfxovgrh Us Afned Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Kombinirani rezervoarji Bljdsgypd Hepfx Afnsd 30-32 m³, primerni za polžaste kompaktorje levo ali desno. Rabljeni, delujoči kombinirani rezervoarji od 4.000 € odvisno od stanja, DDV ni vključen. Možna dostava.

Leto izdelave: 2011, Stanje: dober (rabljeno), • Shredding system, single-shaft shredder, shredder, chopper, cutting mill, single-shaft breaker, rotor mill - Shredding system: constructed entirely from stainless steel, suitable for frozen meat or other materials Bljdpfxjh Di H Ds Afnsd - Motor power: 4 kW - Speed: approx. 60 rpm - Number of cutting blades: 10 pieces - Blade dimensions: 250 mm - Feed hopper: 500 x 895 x H480 mm - Dimensions: 880/1390/H2060 mm - Weight: 640 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Bjdpfovug Dyox Afneld Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 26.920 h, IRB 6640-235/2.55 Year of manufacture: 2011 Blodsim Si Aepfx Afnod We are also happy to offer this robot fully refurbished! For further information, please do not hesitate to contact us!

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 3800, You can find all machine data in the images. If you are interested, simply suggest a price. Blodpfx Aod Dlkaofnod The machine can be inspected and is also ready for collection.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Dvoosni drobilnik RSS serija 600, 2 x 7,5 kW Dolžina rotorja 600 mm Noži 30 mm Stroj je lahko prilagojen vašim potrebam, vključno z elektro omarico. Dobavni rok po dogovoru Možen dovajalni in odvodni trak Ta drobilnik je odličen za uničevanje trdih diskov, prenosnikov, mobilnih telefonov, gume, lesa, papirja ipd. Želite izvedeti več? Pokličite ali pišite. Po dogovoru lahko stroje tudi dostavimo in namestimo. Blodpow Ry Aljfx Afnod Prosimo za povratno informacijo z imenom, imenom podjetja in veljavno telefonsko številko za hiter odziv.

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno),

Leto izdelave: 2018, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Bledpjt Rg H Aofx Afned Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Stanje: pripravljen za uporabo (rabljen), Balirni stroj Hsm HL 4809 LI - Velika odprtina za polnjenje, idealna za velike škatle - Posoda s prekucnikom za enostavno polnjenje Pritisna sila v kN: 480 - Napetost/frekvenca: 3 x 400 V / 50 Hz - Teža bale v kg (odvisno od materiala): do 400 kg - Dimenzije bale dolžina x širina x višina v mm: 1200 x 1100 x 750 - Dimenzije stroja dolžina x širina x višina v mm: 5648 x 1849 x 2515 Trajanje praznega cikla v sekundah: 53 - Ročno vezanje: 4-krat z žico Bljdpsra Dddjfx Afnod