Širok pas brusilnik

HOUFEK Buldog 5 1100 RC 2M

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed Ledpfjlht Hzsx Ahuohh F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Lhsdpfx Ahocubatjueh Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical double-sided wood press by C.O.P.E. Brand. Two work areas measuring 620x110 cm each. Lhodpfxjudy A Ne Ahuoh

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 530 mm, število rezil rezkalnika: 4, Oprema: motorna zavora, Houfek Planer Thicknesser R 530 - 400V/50Hz, 5.5 kW (7.5 HP), Width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterblock 1.2 Total working table length 3100 mm 1.3 Fence dimensions 1300x150 mm with tiltable auxiliary fence 1.4 Planed table surface 1.5 Top control panel with ELGO Z60 digital display - Electronic adjustment of cutting depth 0 - 7 mm - Tilting range of the tiltable fence 0°- 45° - Digital display - Adjustment of infeed table inclination (concave/convex jointing) 1.6 SUVAMATIC cutterblock guard 1.7 4-knife cutterblock D=120 mm Lhjdeu Rnqqspfx Ahujh 1.8 Automatic star-delta motor start 1.9 Electromagnetic brake 1.10 Extraction port with outlet D=150 mm 1.11 Knife setting gauge 1.12 Voltage 400V/50Hz 1.13 Standard packaging in PE foil 1.14 Machine built according to CE electrical and safety standards

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Lhedpfx Ahsfx Hv Hsuoh Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor Lhedeug Ty Hspfx Ahush 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Ledpfxsd N H A No Ahushh Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: zelo dobro (rabljeno), Spodnja vretenasta rezkalka SCM T150 Premer vretena: 35 mm Skupna dolžina vretena: 180 mm Električni dvig vretena Električni pomik vodila Električno nastavljiv kot -10/45° Spremenljiva hitrost vretena: 3000-4500-6000–7000-10000 vrt/min Moč motorja: 5,5 kW Tehnična dokumentacija DTR Lhsdpfow Ral Hox Ahueh

Stanje: novo, Glazing Bead Nailer “2 P Jumbo automatic E.C.” – new – Your Benefits: - Corner joints are fully closed - No open glazing bead joints - No color mismatches when painting - Glazing bead frames easy to allocate Corner Stapling Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; Equipped with angle stop, top and front clamping device. Ledpevnh T Nsfx Ahuehh Pressure can be adjusted separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table, Operated via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Images show the 2P Corner Stapling Machine with the optional mobile work table (see surcharge details below) Surcharges: ----- Mobile Work Table: Height adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 pivoting and sliding support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking device. ----- Surcharge: 1,311.00 EUR net Staples: Packages 15 mm staples (pack of 2000): Price 22.00 EUR 12 mm staples (pack of 3000): Price 32.00 EUR 10 mm staples (pack of 3000): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices are net, plus VAT. Ex-works, plus packaging and shipping. (Technical data as per manufacturer – without obligation!)

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Ljdpefxpbmjfx Ahuohh