3-osni CNC obdelovalni center

Hommel Unverzagt UVA 725 Plus

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 725mm/460mm/460mm, spindle speed: 10,000 rpm, tool holder: SK40, tool magazine: 24 stations, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Overall dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ballscrew and rolling bearing. Chip conveyor included. Documentation available. Inspection on site possible. Lodjttmplspfx Al Sorn

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Lrodjt Hw N Tepfx Al Son Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Speed 2800 rpm Total power requirement 0.4 kW Ljdpfxovibc Hj Al Sjrn Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Suitable for finish and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM, ... Adjustable plate right with micrometer screw adjustment (axial) Adjustable plate left with micrometer screw adjustment (radial) 2 precision motor spindles for holding diamond wheels.

Stanje: rabljeno, Leto izdelave: 2011, Premer struženja: 160 mm Dolžina struženja: 550 mm Krmiljenje Siemens Teža stroja cca 9.000 kg Maks. dolžina struženja: 550 mm Maks. preboj palice: 65 mm Maks. premer struženja: 160 mm Z MBL 3 revolverski glavi z hladilnim stolpom Dodatni hladilni rezervoar s filtrom in črpalkami. Črpalka: 8 bar – 20 litrov + 20 bar – 30 l/min Ledpfx Asyuzfpjl Ssrn

Stanje: rabljeno, Stožerska razdalja min./maks. 0-108 mm Nagibni kot min./maks. 5°/84° Krmilnik GE Fanuc Series 0-GC Delilni premer (razmerje 1:1): 152 mm Delilni premer (razmerje 10:1): 216 mm Premerna razdalja (najfina/groba): 1,3/8,5 Mod. Maks. čelna širina zobnika: 35 mm Območje hitrosti vretena rezila: 41-121 min⁻¹ Območje hitrosti delovnega vretena: 0-33,33 min⁻¹ Teža: 9025 kg Lrjdpfx Aleyh Rmmo Son Potrebni prostor cca 2707 x 2720 x 2200 mm Oprema/dodatki: - 18 kompletov rezil - Transporter ostružkov - Tehnična dokumentacija

Stanje: dober (rabljeno), Please read the technical specifications in full. If the machine is of investment interest to you, we kindly request your complete identification, including a correct telephone number and email address, in order to receive an offer. DECKEL Milling Machine / Tool Milling Machine DMU 35 M 3 x 2 Axes CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001 and 2003 (2 units available) Travel paths X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Lrjdpfx Aljxz Rdas Son Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal tilting-/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox ranges - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial interface RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops; gunsmiths, etc. It impresses with its versatility, thanks to the additionally manually operable rotary/tilting table which allows 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested under power.

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 340 mm Drehlänge 750 mm Steuerung SYSTEM TX 8H Spindeldurchlass 80 mm Umlaufdurchmesser über Planschlitten 530 mm Umlaufdurchmesser über Bett 665 mm Drehzahlbereich - Hauptspindel 3.150 min/-1 Antriebsleistung - Hauptspindel 22 kW Anzahl der Werkzeugplätze 12 Pos. Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Lrjdpfxoxwdw Eo Al Son Es sind 2 Maschinen verfügbar. Preis pro Stück. Maschine 1: - Bilder 1-5 - Betriebsstunden ca.55.790 h Maschine 2: - Bilder 6-10 - Betriebsstunden ca.54.347 h Technische Merkmale & Zubehör: - Y Achse - Zubehörpaket mit starren und angetriebenen Werkzeughaltern -Späneförderer Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... · Adjustable water cooling · Cutting pressure regulator IMPORTANT: Price does NOT include saw blade! (Saw blade price €204) Lodod Iin Hjpfx Al Sorn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 28.742 h, Funkcionalnost: popolnoma funkcionalen, prehod palice: 65 mm, FANUC Serija 31i-Model A 3 revolverji Transportni trak za dele Magazin Dodatne informacije na zahtevo Lrodpoydmbuefx Al Sjn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 13.321 h, potovalna razdalja osi X: 560 mm, pomik osi Y: 640 mm, pomik po osi Z: 640 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: SmoothG, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 35.000 W, število mest v zalogovniku orodij: 60, število osi: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control unit, through-spindle coolant at 32 bar, and a Renishaw OMP 60 probing system. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it is ideal for precise and efficient machining operations. Take the opportunity to purchase this HCN 4000 horizontal machining centre from Mazak. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets: 2; Indexing in 1° increments • Control: Mazatrol SmoothG • Coolant/Air: Through-spindle coolant 32 bar; Through-spindle air supply; Niagara flushing • Functions: Rigid tapping (thread cutting without floating chuck); G00 indexing function • Compliance: CE marking Additional equipment • Renishaw OMP 60 probe • Renishaw Inspection+ (2022 version) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Ljdpfjx Enlljx Al Sjrn Taper size: SK 40