Panožaga

Homag Profi HPL 380/38/22/X

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Nedpfx Asy E Npfsqqewh Operator pedestal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor Njdpfx Aqjw Dv Hzeqewh - WoodWOP 6.1

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm Nedpfsxwaz Hex Aqqjwh - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Edge sanding machine with integrated double conveyor feed system for solid wood parts, veneer edges, and curved workpieces, featuring full unit oscillation. Processing of solid and veneered edges either manually or via automatic feed. - On the veneer sanding side, material is guided along two adjustable fence plates (the infeed fence features integrated extraction slots and is finely adjustable according to a scale based on stock removal), onto an elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two return rollers), with infeed fence extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid sanding side, workpieces are sanded against the continuous, glide-coated sanding belt backing, table size 1180 x 325 mm, including miter gauge with scale. - On the front side, optionally equipped with a quickly installable semi-circular table (with extraction holes) for sanding against the rubber-coated drive roller, Ø 90 mm, resting radius 300 mm. - At the drive roller, optionally equipped with a quickly mountable cast iron auxiliary table (with extraction holes), 400 x 500 mm, mounted on an oscillating spindle for use with sanding rollers Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with protective cover for the spindle. Design: Robust machine base with heavy-duty cast-iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, programmable oscillation stroke from 10 to 90 mm, electrical cabinet integrated in frame, constant belt tension with automatic length compensation, adjustable belt tracking, touch guard plate, dust extraction via two extraction hoods, flexible hoses and a common internal pipe leading to a Ø 150 mm connection flange, recess in base for easy machine movement with pallet jack or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the machine base, two parallel conveyor belts underneath, spaced 250 mm apart, belts 50 mm wide, upper pressure rollers 20 mm wide, motor 0.55 kW (0.75 HP), infinitely variable speed control from 3 to 15 m/min. Nsdow Tfx Depfx Aqqswh COMFORT version Kündig UNIQ-S Includes: Table extension UNIQ/UNIQ-S/Flash Includes: Upward extraction duct for UNIQ without shutter Includes: Semi-circular table for drive roller UNIQ-S Availability: Short term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, moč: 17,1 kW (23,25 KM), vhodna napetost: 400 V, vhodni tok: 29 A, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 4.320 mm, pomik osi Y: 1.326 mm, pomik po osi Z: 170 mm, število osi: 5, število mest v zalogovniku orodij: 33, Oprema: CE označba, Biesse Rover A 1343 CNC obdelovalni center, 5-osni Opis Rover A ATS CNC obdelovalni centri Delovni obsegi X = 4.320 mm; Y = 1.326 mm; Z = 170 mm Transportni trak za odrezke in odpadni material Samodejni sistem mazanja Daljinska konzola Varnostni sistemi skladni z Direktivo 2006/42/ES Vakuumski sistem za eno vakuumsko črpalko s kapaciteto 250 m3/h ali 300 m3/h 1 x 250 m3/h vakuumska črpalka za standardni sistem Pomožni vakuumski sistem za stroj z dvojnim delovnim območjem Večconska miza z 8 nivoji in 24 vozički 8 ATS palet L = 1280 mm – 24 vozičkov z avtomatskim pozicioniranjem (ATS-EPS X-Y) 8 referenčnih zatičev z zadnjim hodom 115 mm 8 sprednjih referenčnih zatičev s hodom 140 mm, nameščenih na višini 1190 mm od zadnjih zatičev 4 stranski zatiči, hod 140 mm (2 desno + 2 levo) z instalacijo 2 dodatna stranska zatiča, hod 140 mm (1 desno + 1 levo) Pnevmatski sistem za dvostransko dvigovanje palic 6 pnevmatskih dvotaktnih podpornih dvižnih palic za Uniclamp vpenjala H=74 za obdelovance do 98 mm debeline Vakuumski modul dimenzij 132 x 146 x H74 mm Vakuumski modul dimenzij 132 x 75 x H74 mm s pripravo za zatiče Uniclamp vpenjalo z dvema premikoma, s hitrim priklopom in okroglo ploščo – H=74 mm, za vpenjanje obdelovancev debeline od 40 do 98 mm 8 referenčnih zatičev s hodom 140 mm, nameščenih na višini 670 mm od zadnjih zatičev Uniclamp vpenjalo z dvema premikoma, s hitrim priklopom in okroglo ploščo – H=74 mm, za vpenjanje obdelovancev debeline od 83 do 140 mm Prirobnica za pripravo 5-osne interpolacijske enote za sestavo agregatov *Agregate lahko uporabljate le z elektrovretenom v navpičnem položaju *Potrebuje 5-osno interpolacijsko enoto Priprava za deflektorje z induktivnim ali pnevmatskim senzorjem na 5-osni operativni enoti Enota za nadzor hladilne tekočine kot zamenjava hladilnika za 5-osne enote 13kW Operativna enota 5 interpolacijskih osi, 13 kW (17,4 Hp), priklop HSK F63, vodno hlajenje Vključuje hladilni izmenjevalnik za hlajenje s temperaturnim območjem +5° do +40°C Desni deflektor s pnevmatskim senzorjem za 11 kW 5-osno elektrovreteno Nadgradnja iz BiesseWorks Basic Machine v BiesseWorks Advanced Machine Železna vilica za deflektorje z induktivnim ali pnevmatskim senzorjem Verižni magazin za orodja s 33 mesti – razmak 120 mm Fleksibilna sprednja zaščita enote za neomejeno nalaganje v Y-smereh (Vse spremembe, napake v tehničnih podatkih, cenah in vseh podatkih so možne, zadržujemo si pravico do (tipkarskih) napak. Brez garancije za natisnjene podatke! Dobava pod odstopnimi pogoji zaradi morebitne predhodne prodaje.) Cene brez stroškov oglaševanja na Machineseeker / Cene brez stroškov objave na Machineseeker Nwsdjy U Naiopfx Aqqeh Najboljše lesnoobdelovalne stroje iz Nizozemske

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOMAG WEEKE OPTIMAT ABD 150 je visokozmogljiv CNC stroj, zasnovan za natančno vrtanje, vstavljanje moznikov in montažo okovja v proizvodnji pohištva in obdelavi plošč. Stroj je idealen za mizarje, proizvajalce pohištva in industrijske lesnopredelovalne obrate, ki potrebujejo natančno in učinkovito avtomatizirano obdelavo. Lastnosti stroja: CNC-krmiljena enota za vrtanje in vstavljanje Nwedpfx Aoym Nvtoqqeh Integriran sistem za lepljenje in vstavljanje moznikov Robustna industrijska konstrukcija Kompaktne dimenzije Uporabniku prijazen upravljalni panel CE certifikat Stroj je redno vzdrževan in pripravljen za uporabo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, število osi: 3, Ta 3-osna HOMAG WEEKE OPTIMAT ABD150 je bila izdelana leta 2014. Gre za rabljeni večvretenski vrtalni stroj, zasnovan za natančno vrtanje in vstavljanje moznikov. Če iščete kakovosten vrtalni stroj, razmislite o modelu HOMAG WEEKE OPTIMAT ABD150, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Rabljeni vrtalni in vstavljalni stroj za moznike Nodjy Dgpaopfx Aqqewh

Stanje: rabljeno, številka stroja/vozila: 008206, Maks. širina panela: 4300 mm Nwjdsx A Tizspfx Aqqeh Maks. dolžina panela: 4300 mm Maks. izstop glavnega žaginega lista: 125 mm Število prijemal: 9

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: nepreverjeno, Homag Centateq P110 PROFI BMG110/3115/F/K CNC obdelovalni center (2025) Nwodpfxjzc Rzpj Aqqoh vključno z Almig Combi XP15 kompresorjem zraka z rezervoarjem (2025) sistem za odsesavanje prahu Air Plants Dust Extraction Ltd (2025)

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Njdpfxoy Ih Skj Aqqowh Location: Austria