Edgeander

HOMAG OPTIMAT KDN 210

Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder Working width: 20 - 230 mm (up to 260 mm) Working height: 8 - 120 mm (up to 140 mm) 5 working spindles, 40 mm spindle diameter Long infeed table (approx. 2000 mm) Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW Pneumatic pressure feed rollers Continuous cardan feed: 5 - 24 m/min, stepless adjustment Feed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts CE-certified machine Year of manufacture: 2001 Supplied without tooling Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration at the exhibition center Cjdpfx Aaewqda Nj Segn Available from stock in Lieboch

Stanje: kot nova (razstavni stroj), DEMONSTRATION MACHINE For sale is an as-new Record Power PT310 planer thicknesser with a planing width of 310 mm. The machine is in its original condition, therefore you get the full warranty. Technical data: - Motor power: 3 HP / 230 V connection - Planer table length: 1,407 mm - Planing width: 310 mm - Cutterhead diameter: 70 mm - Cutterhead equipped with 3 knives - Maximum cutting depth: 3 mm - Feed speed: 7 m/min - Weight: 202 kg Shipping by freight forwarding: Austria: €80.00 incl. VAT Cgjdpfx Aoviu S Uea Sjn Germany: €100.00 incl. VAT South Tyrol: €120.00 incl. VAT The planer thicknesser is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: surface planer, thickness planer, planer, planing, thicknessing Reference: ZXPT310-A

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Cgsdsrigxyjpfx Aa Sen Machine tested, in original condition

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Cjdpjryb D Sofx Aa Sjgn Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: rabljeno, Leto izdelave: 1999, Premer žaginega lista 275 mm Območje reza pri 90 stopinjah: okroglo 80 mm Območje reza pri 90 stopinjah: kvadratno 70 mm Cedpfsl R Nnnox Aa Ssgn Območje reza pri 90 stopinjah: ploščato 100 x 60 mm Območje reza pri 45 stopinjah: okroglo 70 mm Območje reza pri 45 stopinjah: kvadratno 60 mm Območje reza pri 60 stopinjah: ploščato 80 x 50 mm Območje vpenjanja 110 mm Število obratov 45 / 90 vrt/min Skupna potrebna moč 0,5 kW Teža stroja cca 0,07 t Potrebna prostora cca 900 x 700 x 1600 mm Ročna hladna krožna žaga z: - Strojno podnožje - Podporno letev 1500 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. Cjdpol Rix Eefx Aa Segn • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Leto izdelave: 1988, Stanje: skoraj kot novo (rabljeno), Lokacija Kłodawa 66-415 Pogoji dobave OSEBNI PREVZEM Stroški dostave Kupec krije stroške Začetni način Cgododx Elmjpfx Aa Son Po dogovoru Opis Opombe Štiristranski skobeljni stroj, robilni stroj, spicheting stroj Gabbiani Maksimalna širina skobljanja: 160 mm Maksimalna višina skobljanja: 100 mm Minimalna dolžina elementa: 180 mm Premer vretena: 30 mm Število vreten: 6 Razpored vreten: spodaj, desno, levo, zgoraj, zgoraj spodaj Podajanje z gosenico: zgoraj, spodaj Gladko nastavljiva podajalna hitrost: 4–34 m/min Možno je delo s podajanjem pod kotom: 0°–30° Podajanje z kardanskimi pogoni Ročna nastavitev višine vretena Nastavljive glave v vseh smereh Avtomatsko mazanje vodil Vsa ležišča zamenjana s teflonskimi Stroj po popolnem servisu Stroj je prilagojen za proizvodnjo parketa in letev Priključki za odsesovanje: 6 x 120 mm Napajanje: 400 V Skupna moč: 26,2 kW Dimenzije stroja Dolžina: 4060 mm Širina: 1500 mm Višina: 1200 mm Pomembno: vsa mizna površina strojno skobljana in izravnana, nastavljivi koti.

Stanje: dober (rabljeno), INDUSTRIAL SINGLE-SIDED EDGEBANDER HOMAG OPTIMAT High-performance single-sided edgebander designed to meet industrial production requirements. With advanced technology and a versatile configuration, this machine is ideal for processing panel edges quickly, accurately, and with excellent quality. Key features: - Homatic CNC control for intuitive and precise operation management. - Trimming units to ensure perfect surfaces. - Gluing unit with pre-melter for uniform adhesive application with minimal waste. - Edge pressure unit for stable and durable finishing. - Double end trimming unit for fast, precise finishing. Cgjdpfx Aajuh Acae Son - Overlapping double flush trimming unit for smooth, flawless edges on both sides of the panel. - Multifunction corner rounding unit for comprehensive, detailed edge processing. - 0°/90° milling group for high-precision edge finishing. - Edge and glue scraping units for impeccable cleaning and optimal surface finish. - Brushes for thorough cleaning and surface finishing. - Space available for the addition of supplementary units for further customization. - Spare tooling groups for easy and continuous maintenance. Every edgebanding operation is made simple and fast, increasing production efficiency without compromising quality.

Stanje: pripravljen za uporabo (rabljen), Guilliet KXR III z mobilno vreteno za prilagodljive širine Cgodpfx Aaovq Rnho Sjn + Paket za tesarje s končnim merami 240x160 mm + Dovod pred skobeljno mizo + Ojačani motorji Število vreten: 4 kos, premer 40 mm Največji premer orodja za profiliranje levo/desno: 180 mm Navpična nastavitev osi: 40 mm Končna širina: 240 mm Končna višina: 160 mm Dolžina skobeljne mize: 2500 mm Hitrost podajanja: brezstopenjsko 4,5–27 m/min. Ojačana moč motorjev: Skobeljenje: 7,5 kW Vreteno levo/desno: 11 kW, 1 motor Debelinka: 9 kW Podajalnik: 2,2 kW Dimenzije približno (dolžina/širina/višina): 3160 x 1420 x 1440 mm Teža stroja: ca. 1700 kg Na lokaciji, kot stoji Možnost ogleda in obnove ob doplačilu

Stanje: zelo dobro (rabljeno), Here we offer a used Datona Mobile Sandblasting Unit. Datona Mobile Sandblasting Unit DUO - 74 Liter SKU DT-55212 Pros and Cons: - 2.5 m long hose for extended range - Easy switching between blasting media thanks to the mixing valve - When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting unit is used for removing paint and rust. Thanks to the two tanks, you can choose between two different blasting media. The mobile sandblaster operates with a pressure of 4 to 8 bar and requires a compressor with a minimum intake capacity of 350 l/min. Cgedpoqcuvwsfx Aa Ssn Dual Tank: If blasting with soda or calcium carbonate does not achieve the desired result, simply switch to a different blasting medium. For a more effective operation, it is also possible to use both media at the same time. With this sandblasting unit, you get a practical machine for your workshop. With the special mixing valve you can gently and easily remove paint from steel, stainless steel, chrome, aluminium, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object being blasted is not damaged. You do not even need to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Please note: One of the tanks is exclusively suitable for soda and calcium carbonate! ✓ Duo sandblasting unit ✓ 74 litre tank capacity ✓ Air consumption approx. 350 l/min Technical data: SKU: DT-55212 Weight: 33 kg Suitable blasting media: - Aluminium silicate - Dato-Blast calcium carbonate - Soda Blasting cabinet connection: 1/4" Max. pressure: 2 – 6 bar Minimum air consumption: 350 l/min Minimum compressor tank capacity: 100 litres Type: DT-55212 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please do not hesitate to contact us by phone.