Robni brusilnik

HOMAG KL 78

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 0-200-24-6287, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edging materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain for workpiece feed, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable pressure beam - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off when feed stops - Glue roller clamping before workpiece rear edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronous/counter-rotation, 2x4kW, operation-controlled GLUING UNIT A20, comprising: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine for edge thickness from min. 0.4 mm to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) according to edge thickness, 1 powered and 6 non-powered pressure rollers Lhedjyv Da Hepfx Adksd POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable trimming stops - Pre-/flush trimming unit 1.5 kW, top/bottom - FK13 corner rounding unit, 2 motors (top/bottom) with automatic 8-position tool changer and multiple exchange heads, iSystem - Profile scraper MN21, top/bottom, with axis positioning - Flat scraper FA10, top/bottom, (version with 3 tracing rollers) - KS10 belt sanding unit, for straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: rabljeno, Delovna širina: 500 mm Število skobeljnih nožev: 4 kosi Sistem nožev: trakasti skobeljni noži Lhsdpfex Eykgjx Adkjd Delovna širina: 500 mm Sistem nožev: trakasti skobeljni noži Z4 Poravnalni skobeljni stroj ali krajše poravnalka za glajenje in izravnavo lesa, vključno z nastavljivim kotnim prislonom, varnostnimi napravami in dodatki.

Stanje: dober (rabljeno), Offering freezers for deep-freeze production. Various spare parts available. Motors were replaced only two years ago. Fully functional. Ledpfjt I Eycsx Adkshd Pick-up only in 93437 Furth im Wald. Sale without warranty, guarantee or return.

Stanje: dober (rabljeno), Leto izdelave: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS: - X: 1,270 mm - Y: 660 mm - Z: 635 mm DISTANCE BETWEEN TABLE SURFACE AND SPINDLE NOSE: 178 – 813 mm Ledpjvf Nw Djfx Adkehd TABLE: - DIMENSIONS: 1,321 x 584 mm - LOAD CAPACITY: 1,815 kg - NUMBER AND SIZE x PITCH OF T-SLOTS: 7 slots, 14 mm x 80 mm spacing SPINDLE: - ROTATIONAL SPEED: 8,000 rpm - SPEED RANGES: 2 - SPINDLE TAPER: ISO 40 - HIGH PRESSURE / THROUGH-SPINDLE COOLANT FEED RATES: - RAPID TRAVERSE: 18,000 mm/min - WORKING FEED RATE: 12,700 mm/min - JOG: 0 – 1,260 mm/min TOOL MAGAZINE: 24 positions POWER: 15 kW WEIGHT: 7,000 kg YEAR OF FIRST INSTALLATION: 2008

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Lhedpetqqmhefx Adkod Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja . mm Dolžina struženja . mm Krmiljenje 2x 840 D Dodatna oprema: sistem za hlajenje Transporter ostružkov: da kW Nazivni tok generatorja 95,00 A Priključna moč 65,00 kW Lhjdoqn A Rnspfx Adkjd Na voljo so 3 stroji Nakladalni sistem: ? Inventarna številka: 21214 ? Oznaka stroja: Avtomatizacija Promot za 21223 ? Leto izdelave: 1999 x2 / 2000 x1 ? Krmiljenje: Siemens Sinumerik 840D Powerline ? Podatki o električni oskrbi: ? Obratovalna napetost: 10,00 kW ? Nazivni tok: 18,00 A ? Rezerva: 25,00 A 2x 1999 / 1x 2000

Leto izdelave: 1990, stanje: dober (rabljeno), Used side loader Kalmar, The machine has been well maintained. Ledpfsh Et E Nox Adkohd For further details, please refer to the pictures.

Stanje: novo, Table length: 2,200 mm Table width: 1,500 mm Lifting height: 1,850 mm Load capacity: 2,000 kg Minimum lifting height: 260 mm Total power requirement: 1.5 kW Lifting speed – upwards unloaded: 40 sec Lifting speed – downwards unloaded: 30 sec Lhodpfoupxwkex Adked Connection voltage: 400 V Machine weight approx. 0.45 t Space requirement approx. 2.2 x 1.5 x 0.26 m The hydraulic lift tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Highly versatile – suitable for workshops, assembly departments, loading bays, and more.

Stanje: rabljeno, številka stroja/vozila: 006279, Delovno območje os X: 3100 mm Delovno območje os Y: 1250 mm Delovna površina: gnezdilna miza Število krmiljenih osi: 3 osi Število vrtalnih vreten: 11 Število mest za orodja: 8 Lhjdpskw H Ekefx Adkod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Lhsdpfxeh E Sghj Adksd Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available