Mehko oblikovalni zamenljivi profili

Homag mit Fügefräsaggregat

Stanje: rabljeno, Turret for pressure zones, softforming interchangeable profiles for softforming machines, double-end profiler, edge processing machine, scoring motor, chip removal motor, milling motor for edge banding machine -HOMAG softforming interchangeable profiles for quickly changing from softforming profile to straight edge -with heavy-duty guides -laterally adjustable -with counter -HOMAG milling unit for jointing -with heavy-duty dovetail guide -1x Perske motor Ksdpfob Uhrmex Adkelp -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other motors with different power ratings are available from us at an additional cost -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Leto izdelave: 1994, stanje: dober (rabljeno), Rivo bandsaw sharpening machine Kjdopl D Hxspfx Adkolp Model GA 250

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Ksdpfji E Trpsx Adkjlp

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle FZR-24 križni lepilni stroj za furnir, letnik 2013, na prodaj! Ksdpfoumrf Ajx Adkslp Dolžina furnirskih trakov: 400–1100 mm (dva pasova) / 350–2100 mm (en pas) Širina furnirskih trakov: 50–500 mm Debelina furnirskih trakov: 0,3–1,5 mm Največja nazivna zmogljivost / cikel stroja: 30 ciklov/min Povprečna proizvodna hitrost: 17–20 ciklov/min Efektivna dolžina ogrevalne cone: 2478 mm Priključna moč: 22 kW Stisnjen zrak: 6 bar Vrste lepila: na osnovi PVAc ali UREA

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Price negotiable! Kledsqabm Eepfx Adksp

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Max. roll diameter: 1250 mm, max. speed: 100 m/min, weight: 2.9 t. Klodpfx Aof H Dlbsdkjp

Stanje: rabljeno, Rolling machine Max. saw blade width 220 mm Ksdpfxecq Nhco Adkjlp

Stanje: skoraj kot novo (rabljeno), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Kedpfxeg Snt Ss Adkjlp Drive: 22 kW / 1,470 rpm

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. Ksdouq Scpopfx Adkolp The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges.

Leto izdelave: 2024, stanje: novo, Overband Plate Magnet with Cleaning Mechanism Design in stainless steel VA 1.4301, fully welded and sealed Including cleaning drawer Dimensions: 800 x 500 x 180 mm 4 pieces M16 lifting eye bolts on the rear side These two lifting magnets were previously used by one of our customers as 'police magnets' in the meat processing industry. Both overband magnets are in excellent condition. The specified price refers to one unit. Currently, there are still 2 units available for immediate delivery from stock! All information is provided without guarantee; only while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competency is delivering exactly what our customers truly need. Kledjhfwmdopfx Adkjp Together with our clients, we develop and manufacture customized, individual solutions and deliver suitable systems from our own production. Feel free to contact us by phone to find the right solution for your application. Overband Plate Magnet Design in stainless steel VA 1.4301, fully welded Including cleaning drawer 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 800 x 500 x 200 mm 800 x 520 x 250 mm Completely welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of accumulated contaminants Can be installed above any conveyor system...