Edgebander

HOMAG KAL 210 AMBITION 2264

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Nkodpfsx Tqgbjx Abbet Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available Nksdswx Aaqspfx Abbjt - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, številka stroja/vozila: 007575, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint milling: yes Multifunctional unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs Nodpfx Asybawwebbskt

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Max. feed speed: 25 m/min Nodpjwd Itmsfx Abbjkt Maximum panel thickness: 60 mm Working units: 7 pcs

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkalni stroj Panhans 240A Premer vretena: 30 mm Dolžina vretena: 130 mm Spremenljiva hitrost vretena: 3000/4500/6000/9000 obr/min Nkedsxg Iz Hopfx Abbet Elektronsko nastavljanje višine vretena Elektronsko nastavljanje omejevalnikov Elektronsko nastavljanje kota Štirivaljni potisni sistem SCM

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, višina obdelovanca (maks.): 40 mm, delovna višina: 950 mm, model krmilnika: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Nedpfeyc S Haox Abbjkt Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Njdpfexg Ix Sox Abbekt Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: rabljeno, Leto izdelave: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING UNIT "PRISMA": QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING "MATIC" WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (infeed side): 3,680 mm Working area Y-axis (max. workpiece size on rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length in pendulum operation: 1,650 mm Travelling speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62 - 82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction outlet diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling centre in gantry design with workpiece supports, capable of: - Vertical drilling on panel surface - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General 3-4-5 axis milling operations MACHINE STRUCTURE The base is a monolithic construction of thick-walled steel, additionally reinforced across the entire bed with welded stiffeners, ensuring extreme stability. The table shape, with a large base, is key to guaranteeing long-term precision and stability. The machine’s layout allows the user optimal workflow with minimal footprint. The mobile gantry is constructed as a solid monoblock and moves in the X-axis on prism-ground guides with ball-bearing carriages. The machining unit is also mounted on prism-ground guides and ball-bearing carriages on this mobile unit. AXIS MOVEMENT All axes travel on large-section prism linear guides with ball-bearing shoes for maximum contact area, ensuring optimal running even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved with helical rack and pinion drive. Large-section ball screws ensure precise positioning of the machining unit along the moving gantry (Y and Z axes). DRIVES, MOTORS, AND INVERTERS Perfect mechanical dynamics and highest positioning accuracy are ensured by high-quality drives and brushless motors capable of speeds up to 90 m/min, while maintaining optimum finish quality. CONTROL The control system consists of a numerical control unit for milling and drilling operations with the "Xilog Maestro" graphic user interface based on Windows 7 Office OS, 17" LCD color display, QWERTY keyboard, swiveling operator panel, and machine operator interface with Xilog Maestro software. Xilog Maestro Features Programming: - Parametric graphical programming - Import of DXF files (2D; geometries: "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aides for drilling and milling operations Nkedjxnldbepfx Abbjt - Automatic optimization of drilling operations and tool-change cycles - Option to shift panel zero-point for drilling on inclined or curved panel edges

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Nodovqbh Espfx Abbjkt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, For sale: Felder spindle moulder F-700 Z with 4 spindle speeds. This machine has been used as a display model in our showroom, making it as good as new and sold with full warranty / guarantee. Technical data: - 4 spindle speeds - Spindle can be tilted from 90° to 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power: 5.5 kW / 7.5 HP with star-delta start - Year of manufacture: 2023 / like new Nodpfx Aewp Ri Usbbokt The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Information Tel.: 03137-3109 Related terms: spindle moulder, milling machine, moulders Reference: R-D1618