Dvojni končni profilator

Homag FLO 22

Stanje: pripravljen za uporabo (rabljen), delovna širina: 2.600 mm, Double-end profiler Manufacturer: Homag Model: FLO 22 Godpfx Aexl Udxob Touk Workpiece width min. approx. 190 mm – 2600 mm Workpiece thickness: 8 – 90 mm Adjustable workpiece projection: 10 – 120 mm Working height from floor: 905 mm Feed rate steplessly adjustable: 5–25 m/min Magnetic braking for feed motor Electronic width adjustment, positioning in rapid/traverse mode, Adjustment speed max. 3 m/min. Transport chain with cams, cam spacing 900 mm, cam height adjustable up to 20 mm Infeed on left side of machine Equipped with 3 motors per side: Scoring unit: 1.5 kW controlled, motor brake, 100 Hz, 6000 rpm, for tool diameter up to 180 mm Profiling unit: 4.5 kW, motor brake, 100 Hz, 6000 rpm, 15° tiltable, for tool diameter up to 250 mm Milling motor: 4.5 kW, electro-pneumatic control for pocket milling, motor brake, swivel range 90 degrees, 100 Hz, 6000 rpm, reversing switch, extraction hood, tool diameter up to 200 mm Free space available to install a standard milling unit Complete with frequency inverter 30 kVA, 100 Hz, IP 54

Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles electronically adjustable for width and height Detailed description: ----- Technical specifications: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 125–145 mm Tool circle rabbet cutter: 130–160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle – right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. tool diameter behind fence: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle – left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. tool diameter for straight knife heads: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC controlled Segmented pressure shoe in front of upper tool holder, adjustable to tool circle and can be swung away from the tool, spring-loaded. Pressure shoe before and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom. 5th spindle – bottom ----- Gjdewzmu Repfx Ab Touk Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st lower cutter pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment path of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380-420 V), 50 Hz All spindles in IE2 design Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations not considered.

Stanje: rabljeno, • Workpiece width: min. approx. 190 mm - max. 2600 mm • Workpiece thickness (mm): 8 - 90 • Adjustable workpiece overhang (mm): 10 - 120 • Working height from floor (mm): 905 • Feed speed steplessly adjustable (m/min): 5 - 25 • Magnetic braking of feed drive motor • Max. adjustment speed (m/min): 3 • Transport chain with cams: Cam pitch 900 mm, cam height adjustable up to 20 mm 3 motors per side: • 1st scoring unit: 1.5 kW, controlled • 2nd cutter: 4.5 kW, swiveling by 15° Guedpfeur Uzqex Ab Tjk • 3rd milling motor: 4.5 kW, electropneumatic control for plunge milling, swivel range 90° • Free mounting space: for installation of a standard milling unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Celaschi squaring machine 4+4 motors Gedpfx Abevx Afns Tsuk Opening width 3000 mm Option for complete overhaul available

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit Godpfx Abowhmdfj Tjuk - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Chain mortising machine with auxiliary unit consisting of two horizontal milling units for creating handle and key holes, and two adjustable, motorized, swiveling drilling units for slotting operations. Vertical working unit: - Maximum workpiece thickness: 230 mm - Maximum workpiece height: 710/1050 mm - Vertical stroke: 150 mm - Horizontal stroke: 300 mm - Traverse head stroke: 80 mm - Head tilt: +/- 45 degrees - Vertical spindle stroke: 250 mm - Aggregate can be swiveled +/- 45 degrees - Motor power: 2.2 kW, 400V, 50 Hz Horizontal working unit: - Drilling units: 2 pcs. - Min./Max. longitudinal stroke: 80 / 130 mm - Manual travel: 140 mm - Pneumatic traverse: 140 mm - Drill motor power: 0.18 kW, 400 V, 50 Hz - Router motor: 1.8 kW, 400V, 50 Hz Weight approx. 650 kg Guedslpcffjpfx Ab Tsk Includes: - Pump for automatic chain lubrication - Tooling - Manual Used machinery notice: - Subject to errors in technical specifications and prior sale. - All prices are ex-works; loading at location included. - Machines have been cleaned and function tested. - All machines are sold as seen, without any warranty claims. Buyers may inspect machines at the site. - Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Technical Specifications: Heating Plate Size (mm): 2850 x 1550 Electric Heating Plate Design: Aluminium heating plate on top Total Pressing Force (kN): 2400 Max. Chamber Pressure (bar): 6 Max. Operating Temperature: 180 degrees Celsius Max. Batch or Workpiece Size (mm): approx. 2460 x 1180 Thermoplastic Film in Roll Form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Press Chamber Height (mm): up to max. 180 Connection Data: Installed Power (kW): approx. 46 Required Air Pressure (bar): approx. 8 Gsdpfx Aov Np H Hjb Touk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981, with walk-in KASCHWIG soundproof cabin – ALMOST NEW, year 2017 - Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW Godpfx Aotkt Tpjb Tjuk - Hydraulic feed 6–60 m/min - Feed motor 22.0 kW - 4 driven table rollers - Spindle diameter 50 mm - Automatic table lubrication - Spindles 1 + 4 + 5 + 6 with outboard bearing - Spindles 1 + 4 with straight jointer - Feed rollers 170 mm - Approx. 10 hydro planing heads included - Extraction hood above the machine

Stanje: skoraj kot novo (rabljeno), Four-sided planer Weinig Hydromat H22N - German production - Technical documentation included (DTR) - Year of manufacture: 1992 - Two feed rollers in the table before the first cutterhead - Suitable for wet timber Guedpfx Abspvi Skj Tok TECHNICAL SPECIFICATIONS: - Planing width: 220 mm - Planing height: 140 mm - Spindle diameter: 50 mm 1st bottom head: 7.5 kW 2nd right head: 7.5 kW 3rd left head: 11 kW 4th top head: 7.5 kW 5th bottom head: 11 kW Hydraulic feed Feed motor power: 15 kW Feed speed steplessly adjustable up to 60 m/min Feed via cardan shafts Electric height adjustment Pneumatic pressure Five feed rollers in the table Eight upper steel feed rollers One upper rubber feed roller Supports on horizontal spindles Jointer on lower spindles Transport dimensions: 500 x 200 x 160 cm Weight: 4 t

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) Gjdpfx Absu Udd So Teuk 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) 6 powered rollers in the table