Obdelovalni center

Homag BAZ 31/40K Optimat

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, overall length: 8750 mm, overall width: 5250 mm. Pedpfsqvnl Tex Agxspr

Stanje: zelo dobro (rabljeno), Buderus KB 372-250 kW condensing boiler, 100°C, 6 bar Ppodpfx Aevyvhfegxor

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Pjdjwmm Nrepfx Agxepr

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Ppedpfox D Rt Hox Agxjr Območje hitrosti vretena: 8000–24000 Število osi: 3 Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Uporaba CNC obdelava lesa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Prodajam popolnoma opremljen robni lepilni stroj HOMAG KAL370 AMBITION 2280, letnik 2015: Konfiguracija: Vhodni naslon ročno nastavljiv Združevalna rezkala ročno nastavljiva Lepljenje robov s predgrevalnim rezervoarjem Cona za pritisk materiala ročno nastavljiva Krožne žage pneumatsko nastavljive Radii rezkali zgoraj in spodaj ročno nastavljivi Krožna glava s 4 motorji ročno nastavljiva Radialni potegni nož R2 pneumatsko izklopljiv / drugi komplet R1 vključen Ravna strgala Polirne ščetke Podpfxexnbx Is Agxopr Separacijsko brizganje spredaj Čistilno brizganje zadaj Delovna višina ročno nastavljiva Višina materiala 8–60 mm Debelina robnega materiala 0,4–20 mm Podajalna hitrost do 20 m/min Skupna dolžina z vključenim podajalnikom 7860 mm Stanje prevoženih metrov: 2.926.000 m zlepljenih Vključena popolna dokumentacija in CE-serifikat. Stroj je v zelo dobrem stanju, popolnoma funkcionalen!

Stanje: rabljeno, Leto izdelave: 1999, dolžina mize: 7.900 mm, vrtljajska hitrost (min.): 18.000 obr/min, Dimensions: 9400 x 3300 x 2300 mm Weight: approx. 12,000 kg Ppedpfsua Ap Rox Agxjr Taper: HSK63

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, število osi: 4, največja hitrost vretena: 18.000 obr/min, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It is equipped with Homatic CNC control, WOODWOP CNC programming system, an 18-position disc tool changer, and a main spindle with a 12 kW three-phase motor. The machine can process workpieces up to 3,000 mm in length and 1,400 mm in width and is fitted with a full-length table with adjustable vacuum clamps. Ask about the availability of this HOMAG PROFI BAZ20/30/16/V/D CNC woodworking center. Contact us for further details. • Control/Software: Homatic CNC controller; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length: 800–3,000 mm; Width: 350–1,400 mm; Max. thickness: 70 mm with edge / 80 mm milling • Minimum rail width: 120 mm; Max. weight: 150 kg • Table/clamping: Ppedpfjx D Ribox Agxjr • Full-length table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 adjustable manually in Y-direction • 8 vacuum clamps, 125 x 50 x 100 mm • Working height, bottom edge of workpiece: 950 mm • Unit for shifting vacuum clamps on carrier rail with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop pins for laminate overhang: lifting/rotating device, max. 20 mm overlay, stroke length 110 mm, individually selectable, end-position monitored (for manual door loading) • Main spindle: • Speed range: 1,500–18,000 rpm (VFD 15 kW), full rated power from 12,000 rpm • Max. tool diameter: 180 mm (milling) / 200 mm (sanding); dust extraction for all tools/units • Unit interface/C-axis: • Pneumatic and tiltable drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disc tool changer for HSK F63; tool weight 6 kg; max. tool length 200 mm • Configurations: 18 x max. Ø 130 mm; or 9 x max. Ø 180 mm + 9 x max. Ø 70 mm; sanding tools max. Ø 200 mm • Toolchanger raised for traveling pickup (left side) • Units (for tool changer unless stated otherwise): • Drilling/milling unit, 4 spindles: ER25 up to shaft Ø16 mm, max. projection 50 mm, max. speed 13,500 rpm, continuously tiltable via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12,000 rpm, integrated air blast, unlimited tilt over C-axis • Tilting saw/drilling unit: manually 0–90°, flange Ø30 mm, cutting body Ø52 mm, prepared for crosscut saw max. Ø 180 mm, drill chuck with Weldon D=10 mm, max. speed 9,000 rpm, C-axis tiltable • Cutter holder D=30 with chip guide: arbor length 45/80 mm, chip deflector plate controlled via C-axis, changer space Ø 140 mm • Edge trimming unit: simultaneous top/bottom, edge radius max. R12 mm, min. external radius ~R5 mm / internal radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis tilt, max. speed 12,000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow sensing shoes • WPL cutterhead: exit angle 5°, Ø 70 mm • Edgebanding/gluing equipment: • Drive spindle/V for gluing units: mounted on the right side of the gantry; cross-slide with Y return lock and Z-axis lift; return lock with C-axis and electric/electronic interface; own Z-axis • Gluing unit for 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); minimum internal radius R40 at 90°; max. edge height

Stanje: rabljeno, Leto izdelave: 1999, skupna višina: 3.000 mm, skupna dolžina: 6.400 mm, skupna širina: 4.300 mm, No. 3269 CNC Machining Center HOMAG BAZ 41/30K Used, Year of manufacture: 1999 Working dimensions: X 3000 mm / Y 1300 mm / Z 250 mm Edgebanding unit Drilling and milling unit with 4 spindles Flush milling unit Sanding unit Interchangeable air nozzle Adjustable milling and drilling unit Underfloor milling unit 12-position rotary tool changer WoodWOP 5.0 control system Overall dimensions with safety fence approx. 6400 x 4300 x 3000 mm (LxWxH) Sale on behalf of a customer, ex location near 71063 Sindelfingen, without disassembly, transport, or installation Disassembly, loading, and transport by us optional on request Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; sold as seen Photos and videos are for reference only and do not represent the actual scope of delivery Psdpsy Dtp Hjfx Agxopr Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery conditions: ex location

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 80.859 h, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.630 mm, TEHNIČNI PODATKI X-pomik brez lepljenja: 6.000 mm X-pomik z lepljenjem: 5.000 mm Y-pomik: 1300 mm Y-pomik z glavno vreteno + premer orodja 20 mm: 1630 mm Y-pomik z lepljenjem: 1450 mm Pripravljalna miza: Dyna Poin BIMA 410 V Ppsdpfx Aex Af Ivsgxjr Zasedenost: 4 mesta Enota za obrobljanje robov: prisotna Delovne ure: 80.859 h