Panožaga

Holzma HPL 380

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller track (2-lane elements): 9 units Clamps: 7 units, first 3 with 2-finger design Air cushion table width: 650 mm, 4 pcs, each 2160 mm long Central blower: 1 unit with increased blower performance Prodpfxsymx S De Anpsc – 3 inclined lift clamps (2-finger): – 1 inclined lift clamp (1-finger): – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1–150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. clamping width 0 mm, max. clamping width up to full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label program / label printer PICA 104

Stanje: rabljeno, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top 6th shaft: bottom Prjdpfx Asrg Exrsnpjc 7th shaft: universal shaft

Stanje: rabljeno, Leto izdelave: 2011, Žaga za razrez plošče Proizvajalec: Holzma Tip: HPL 380 Pjdpfxsz Akcxo Anperc Letnik: 2011 Tehnični podatki Dolžina reza: 4.300 mm Širina mize za rezanje/dvig: 2.200 mm Maks. velikost plošče: pribl. 4.300 - 2.200 mm Min. debelina plošče: 9,5 mm Izstop žaginega lista: 95 mm Maks. premer žaginega lista: 380 mm Glavni motor žage: 13,5 kW Motor za predrez: 2,2 kW Naprava za predrez Hitrost pomika voznega okvirja žage: 1.150 m/min Hitrost pomika s programiranim drsnikom: do 90 m/min Sponke: 7 kosov Nosilnost dvižne mize: do pribl. 4.000 kg Nadzorni sistem: HOLZMA CADMATIC 4.0 Skupna priključna moč: pribl. 28,7 kW Višina delovne površine: pribl. 920 mm Dvižna miza: 4-stebrična dvižna miza Nakladanje: od zadaj Mize z zračnimi blazinami: odvisno od opreme CE Opomba: Tehnični podatki in opisi so kopije prvotne potrditve naročila. Podatki so namenjeni samo informativnim namenom in niso zavezujoči.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, številka stroja/vozila: 0-240-06-8502, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), največja višina reza: 95 mm, premer žaginega lista: 380 mm, dolžina rezanja (maks.): 4.300 mm, širina plošče: 2.200 mm, TEHNIČNE PODROBNOSTI Dolžina reza: 4.300 mm Širina plošče: 2.200 mm Previs plošče: 95 mm Premer glavne žage: maks. Ø 380 mm Pjdpfx Anezx Anxeperc Napred žage: do 150 m/min Napenjalne klešče: 7 kosov PODROBNOSTI O STROJU Moč glavnega motorja žage: 18 kW Moč motorja za predrez: 2,2 kW Delovni čas: približno 38.544 ur (datum: 05.10.2023) OPREMA Avtomatsko dovajanje plošč z zadnje strani Dovajanje z dvigalne mize Dvigalna miza Avtomatski programski sistem z napredovanjem napenjalnih klešč Glavna žaga Predrez Avtomatski nadzor dolžine reza in pozicioniranja Naprava za nagib in povratni transport Mize s zračnimi blazinami v območju upravljanja Programsko okolje CADmatic za upravljanje in optimizacijo Tiskalnik etiket PICA 108 Sistem valjev in transportne tehnike v območju dovajanja z zadnje strani Varnostni plašč s sistemom zaščitne ograje Priključki za odsesavanje z vodilom za odsesavanje na strani stroja

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, hitrost pomika os X: 20 m/min, vrsta aktuacije: električni, skupna dolžina: 6.200 mm, skupna masa: 3.100 kg, Tornado+ – popolnoma obnovljen / KOT NOV Naprave za nanašanje premaza GS, RS, po želji možnost teksturne obdelave Lepljenje, prilepljanje robnih trakov, obrezovanje, stranska obdelava, obdelava z radiusom, kopiranje kotov AKF, strgalo R1/R2 s funkcijo nanašanja folije na 1 Tiskanje na trak / Synchro-Flex PUR-lepljenje v osnovni izvedbi Dimenzije obdelovanca: Minimalna širina: 70 mm Minimalna višina: 8 mm Maksimalna višina: 60 mm Minimalna dolžina: 150 mm Pjdpfx Anozkk Drepjrc Debelina plošče: Maks. 60 mm Debelina robov: 0,3 – 15 mm -CM – sistem za lepljenje CombiMelt Modularna zasnova za enostavno zamenjavo predgretih rezervoarjev. Primerno za obdelavo EVA- in PUR-taljenih lepil ter vseh običajnih granul za čiščenje. Omogoča obdelavo različnih vrst lepil s pomočjo vseh delovnih parametrov (kot so količina doziranja, predgrevalna in delovna temperatura) preko posameznih delovnih programov. -Posamezni pogon z vso prilagodljivostjo za individualno vključitev posameznih obdelovalnih motorjev preko sistema Power-Bus Posebnost: stroj s paketom Speed! 20 m/min s funkcijo kopiranja kotov!! Orodja in verižne plošče – NOVO Možnost prodaje stroja z garancijo. Pregled in demonstracija po dogovoru.

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Psdpfx Ansimr Icoperc Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.300 mm, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.200 mm, višina plošče: 60 mm, Submission of a bid obligates the buyer to collect the items within the specified deadline, by calendar week 02/2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination of two Holzma saws connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data - Cutting length: 4,300 mm - Lift cut size: 4,300 mm x 2,200 mm - Maximum panel size for lift table loading: 4,300 mm x 2,200 mm - Minimum panel size for lift table loading: 1,200 mm x 400 mm Stacking Heights - Maximum stack height on lift table (floor level installation): 560 mm - Maximum stack height on lift table (pit installation): 780 mm - Maximum load capacity, lift table: 4 t Roller Rails - Roller rail element, 10-track: 1 unit - Roller rail element, 2-track: 6 units Clamping Grippers - Spacing: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables - Extraction device position: 2,375 mm - Air cushion table with rollers, 2,160 x 800 mm: 1 unit - Air cushion table with rollers, 2,160 x 650 mm: 3 units - Central blower: 1 unit - Nozzle line for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data - Cutting length: 4,300 mm - Cutting width (program pusher stroke): 4,250 mm - Saw blade projection: 95 mm Combination and Clamping Gripper System - Combination profile rail element, 2-track: 9 units - Clamping grippers: 7 units - Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm - Manual trim stops at grippers: 4 units (position 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction - Air cushion table with roller elements, 2,160 x 650 mm: 4 units - Central blower: 1 unit - Nozzle line for air cushion tables: 70 x 70 mm Feed and Program Pusher - Saw carriage feed, forward: 1–130 m/min - Saw carriage feed, backward: constant 130 m/min - Program pusher speed, forward: 80 m/min - Program pusher speed, backward: 80 m/min Predpfexy Ng Rex Anpec BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System - Integrated length measurement - Integrated width measurement - Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Stanje: rabljeno, številka stroja/vozila: 005108, Položaj 1: Krožna žaga za plošče – podajanje od spredaj HOLZMA-HPP 380/43/43 + TLF Položaj 2: Horizontalno skladišče HOLZMA-HPP 380/43/43 + TLF Prjdpswuck Isfx Anpsc

Stanje: zelo dobro (rabljeno), ENOSTAVNA STROJ ZA OROBOVANJE ROBOV (LEVA STRAN) Debelina robov v zvitkih (min/maks) mm 0,3 / 3 Debelina robov v letvah/trakovih (min/maks) mm 0,4 / 20 Debelina plošč (min/maks) mm 8 / 60 Nadzor POWER CONTROL PC23 Powertouch / WoodCommander (pripravljen za TAPIO) Hitrost podajanja m/min 16-25 Tlak na valj, pogon s klinastim jermenom Naprava za nanašanje ločilnega sredstva, zgoraj/spodaj Nastavljivo vodilo, nadzorovano s sistemom C.N. Naprava za obdelavo robov 2 x Kw 3 Naprava za ogrevanje robov Naprava za nanašanje lepila (vroče taljeno lepilo + predgrevalnik) FE-MA-TECH + QA/PU + PU65 Območje pritiska na rob (nadzorovano s sistemom CN) "C 7" Magazin za robove (oddelek št. 2) s servo-sistemom za podajanje robov Pedpezku Rpsfx Anpjrc Odrezna naprava PK 25 (2 x Kw 0,8) maks 25 m/min Predobdelovalna naprava BF20 (2 x Kw 1,5) Večprofilna obdelovalna naprava MF21 (2 x Kw 0,55) 0°-20° Večfunkcijska naprava (obdelava zaobljene robove in oblikovalna naprava) FK 30/V20 (1 x Kw 0,7) nadzorovano s sistemom CN Univerzalna obdelovalna naprava za utore/fuge in profiliranje SF 21 (1 x Kw 5) 0°-90° Večprofilna naprava za obdelavo robov MN 21 (nadzorovano s sistemom CN) Ploski noži FA20 Naprava za poliranje FA06 (2 x kW 0,18) + prosti prostor

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm Psdpjxwaz Hofx Anpjrc - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...