Dust collector, Suction equipment

Holzing RLA 125 VIBER Power 4500 m3h

Leto izdelave: 2013, stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Djdpfx Agjxw N Uvogekw Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor Dkedpfei Dfidex Aggjw with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, 1 manhole (optionally also available with 2 manholes). Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, we can equip our tanks with the following accessories: Dodpfx Aji Enxdjggekw - Leak detection system with under- and overpressure leak indicators - Manhole shaft with shaft cover, available in walk-on or drive-over versions - Partition walls (for multi-chamber tanks) - Internal coatings (e.g. two-component epoxy resin), partial or full lining - Content and level measurement instruments as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Fuel dispensers for diesel, biodiesel and petrol – optionally with complete tank data acquisition - External tank insulation with PU foam The tank is internally cleaned, and the external coating has been overhauled and tested at 14 kV. Cost-effective delivery with our own truck possible. Simply inform us of the delivery location and you will receive an immediate quote for exact freight costs. Should you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers possible, please feel free to contact us regarding this. Delivery time by arrangement! We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Dodspgkmwepfx Aggokw Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg Dkodjhfufgepfx Aggjw

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Na voljo je mobilna odsesovalna in filtrska naprava Höcker. Filtrski razred: H3, moč motorja: 4kW, sesalna šoba: 200mm, filtrirna površina: ca. 12m², maks. volumenski pretok: 3400m³/h, maks. podtlak: 2700Pa, volumen zbirnega posode: 350l, dimenzije stroja (D/Š/V): ca. 2000mm/1100mm/2000mm, teža: ca. 420kg. Možen je ogled na lokaciji. Djdoyg Nu Nopfx Aggokw

Stanje: zelo dobro (rabljeno), Stainless steel tank 1000 L Dkodpfx Aolbiiajggew Manufacturer: Willi Lermer Wiesbaden Capacity: 1000 L Stackable 10 units available Very good condition, direct from production!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 347 h, gradbena višina: 2.230 mm, lastna masa: 850 kg, skupna dolžina: 2.410 mm, gradbena širina: 1.160 mm, Tractor Dkodpfeyfy I Dox Aggow Technical condition: good

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Oprema: Na voljo je tipska ploščica, Volumetric dosing systems – granules, powders, and regrind We offer a selection of fully functional volumetric dosing systems, ideally suited for the metering and conveying of granules, powders, and regrind materials. • Various models available: We stock a range of dosing systems that can be adapted to your material and application requirements. • Testing available: Upon request, we will test the dosing equipment with your material to ensure it meets your specifications. • Reliable operation: All units have been tested and are ready for immediate use. Dksdovmylzjpfx Aggsw Contact us, and we will help you find the right dosing system for your needs. Our team is happy to answer your questions or provide advice!

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Dodpfx Agshp Rcrogskw Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support