Stroj za robno lepljenje

Holzing G-MAX 480 zarabianie naroży wstępny frez

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPP 380 Podatki o rezu Dolžina reza: 4.300 mm Širina reza (programska pomična dolžina): 4.250 mm Višina izstopa žaginega lista: 95 mm Kombinirani in vpenjalni sistem Kombinirano profilno vodilo, 2-tirno: 9 kosov Vpenjalne čeljusti: 7 kosov Razdalje: 75/275/475/1.050/1.850/2.650/3.450 mm Ročni paralelni prisloni na vpenjalnih čeljustih: 4 kosi (položaji 75/475/1.050/2.650 mm) Zračne blazine in odsesavanje Miza z zračno blazino in kolutnim elementom 2.160 x 650 mm: 4 kosi Centralni ventilator: 1 kos Cevna napeljava za zračne blazine: 70 x 70 mm Podajalnik in programski pomik Nwodpfx Aox Nf E Rog Tsc Premik žaginega vozička naprej: 1–130 m/min Premik žaginega vozička nazaj: konstantno 130 m/min Hitrost programskega pomika naprej: 80 m/min Hitrost programskega pomika nazaj: 80 m/min

Stanje: rabljeno, Edge thickness: from 0.4 to 5.0 mm Workpiece thickness: from 10 to 50 mm Total length: 4000 mm Feed speed: 11 m/min Bimatic Edge Bander Model: Prima 7.5 Two ----- Manufacturer's Description: Technical Data: Edge thickness: 0.4 – 5 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction spigots: 3 x 150 mm Connection: 9 kW – 400 V / Compressed air: 6 bar Units: Jointing milling unit incl. AIGNER diamond jointing cutter heads, with Konstantin DIA quick-change knife system and controlled edge air blast nozzle after the 2nd jointing cutter head. Cut-off saw unit with extraction device incl. 2 pneumatically swivelling saw blades, adjustable and programmable from the control panel. MULTI-radius milling unit with 4 position motors, adjustable and programmable from the control panel. Includes DIAMOND cutters with 1 mm and 2 mm radii. Corner rounding unit (copy milling unit) with nesting function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1 mm and 2 mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Incl. extraction device with chip collection box for scraper shavings. Flat scraper unit with four-sided scraper blades, reusable on 4 edges. The complete unit is pneumatically engageable/disengageable. Removed glue residues are extracted. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth/sisal/lambswool wheels for cleaning and polishing. General Features: - 90° infeed guide - Telescopic outfeed with double support - Motorised infeed fence (jointing thickness setting), adjustable and programmable from the control panel - Motorised upper pressure beam, adjustable and programmable from the control panel - Motorised pressure zone, adjustable and programmable from the control panel - 5 mm version: quick-change motors with reversible flush cutters, interchangeable for milling motors with radius cutters - High-gloss package: roller sensing for radius milling unit, radius scraper unit, and flat scraper unit - Large visual, noise and safety enclosure for all units and the glue pot - Interior lighting - Control panel with 15” touchscreen and intuitive operator guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap monitoring - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and high workpieces (specially for PUR adhesive) - Additional quick-change glue pot - Pressure zone with 3 pressure rollers, with the first roller driven by a motor - Heavy-duty roller shear for edging 54 x 3 mm - Original RIEPE spraying system - In front of the jointing milling unit: LPZ II separator - In front of the saw unit: cooling and anti-static LP 289/99 Nodpfxswgwl De Ag Towc - Mo...

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nwedpfxex Ux U As Ag Tec Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Μηχανή περιθωριοκόλλησης Hebrock K36 με σύστημα ελέγχου PLC, δοχείο κόλλας ταχείας θέρμανσης με ειδική αντικολλητική επίστρωση, χωρίς ανάγκη συντήρησης, με προκαταρκτική ρύθμιση για γρήγορη αλλαγή δοχείου κόλλας. - Οθόνη αφής 10" - Μέγιστο πάχος ταινίας 3 mm - Ελάχιστο μήκος τεμαχίου 200 mm - Ελάχιστο πλάτος τεμαχίου 80 mm - Ταχύτητα τροφοδοσίας 10 m/λεπτό - Έτοιμη για λειτουργία σε περίπου 5 λεπτά - Μέγιστη κατανάλωση ισχύος 14 kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Διαστάσεις μηχανήματος 5250x1230x1430 mm - Βάρος περίπου 1700 kg Εξτρά • Προκεφαλή προρριστικής κατεργασίας Whispercut, ύψος τεμαχίου 60 mm • Θερμαινόμενος οδηγός εισαγωγής • Ακτίνα για στρογγυλεμένα γωνίες R = 2 mm • Σύστημα ταχείας αλλαγής για μοτέρ στρογγυλέματος γωνιών • Ξύστρα πολλαπλών ακτίνων R2/R1 • Στρογγύλεμα γωνιών σε ύψος τεμαχίου 60 mm • Μονάδα ψεκασμού αποκολλητικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού Nwedpfxewyu E Uo Ag Toc • Προστατευτικός ψεκασμός άκρων • Δυνατότητα επεξεργασίας για nesting • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λοξότμηση) • Εσωτερικός LED φωτισμός • Εξοπλισμός για μικρά τεμάχια • Προεγκατάσταση για σύστημα επιστροφής (barbaric) • Πακέτο αξόνων / Μοτέρ ρυθμίσεων ύψους, ταινίας και προρριστικής κατεργασίας • Πρόσθετα στηρίγματα εισόδου/εξόδου τεμαχίων (450 mm το καθένα)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, R0.11.75 razred si 400ep Rezilo Izklopljeno 57.00.42 Kotni vodnik s 3 LCD zasloni za pozicioniranje omejevalnikov 57.04.43 Samodejna nastavitev z 2 osmi skupine za predrezanje 57.04.21 Šasija za kotne obdelave z napravo CompeX 57.03.53 Podaljšanje podporne mize za panele z valjčno progo na strani vzporednega vodila Nwedpfx Aoyfxalog Tec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: 2459, Funkcionalnost: popolnoma funkcionalen, Stroj v zelo dobrem stanju - zelo pregleden upravljalni del - minimalna širina obdelovanca cca 80 mm - minimalna dolžina obdelovanca cca 200 mm - podajna hitrost cca 10 m/min - transportna veriga s trdno privitimi specialnimi verižnimi ploščami Nsdpfex Ahmujx Ag Towc - dvojni zgornji pritisni valj - dolžina stroja 4300 mm - širina stroja 1400 mm - teža cca 1250 kg - izvlečni nosilec obdelovanca na sprednji strani - avtom. centralno mazanje za kapno žago & kotno rezkanje - posoda za talilno lepilo s teflonsko prevleko (zelo malo vzdrževanja) - pripravljenost za obratovanje cca 5 - 6 minut - Poravnalna enota - pnevmatsko valjčno kapiranje - neposredno nanašanje lepila na obdelovanec - kapirna enota za sprednjo in zadnjo stran - poravnalna/posnemalna/radialna rezkalna enota - zaobljanje robov - ravnalna strgala s dvojno kontrolo

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Nwsdpfx Agex S Hmzj Toc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: novo, Leto izdelave: 2026, The Holzing G-MAX 380 edge banding machine with pre-milling and corner rounding ensures a high-quality finished result. It processes coils up to 3 mm thickness and strips up to 4 mm. This cost-effective machine is equipped with a 1.2 kg glue tank, pre-milling, automatic gluing, edge trimming, end trimming, top/bottom milling, radius scraper, and polishing function. It comes standard with an easy-to-use control panel featuring a touchscreen interface. Feed speed: 7 m/min Panel thickness: 12–45 mm Edge thickness: 0.4–3 mm Minimum panel width: 90 mm Minimum panel length: 170 mm Corner rounding minimum panel length (12–30mm): 170 mm Corner rounding minimum panel length (30–45mm): 220 mm Table height: 856 mm Extended support width: 560 mm Dust extraction: Ø4 * 3 Motor power: 6.0 kW-1 phase, 5.75 kW-3 phase Net/gross weight: 500 kg / 632 kg Nwedpfogyi Tvex Ag Tjc Packing dimensions: 2920x720x1320 mm Pre-milling: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 10,500 rpm Polishing: 2,800 rpm Feed motor power: 0.75 kW Jointing cutter motor power: 1.5 kW Glue application spindle motor power: 0.25 kW Front/rear milling and corner rounding: 0.35 kW Top/bottom milling: 0.55 kW Polisher motor power: 3km-0.12 kW; 1km-0.18 kW Preheating power: 0.4 kW Glue tank heating power: 1.315 kW Jointing unit removal range: 0–2 mm

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier Nodpfx Ajyfp N Djg Towc

Stanje: zelo dobro (rabljeno), Formatna žaga - panelna žaga SCM class px 350i, dolžina reza 320 cm, nagib agregata 0-45 stopinj, maksimalna velikost lista 350 mm, maksimalna višina reza 105 mm, maksimalna višina reza pri naklonu 72 mm, širina reza na zadnjih vodilih stroja 1300 mm, Nwsdpjyf H Tgefx Ag Tsc motor 5,5 kW, hitrost žage - 4000 obr/min, naprava za rezanje pod kotom, stroj v zelo dobrem stanju, možnost preizkusa pred nakupom.