Stroj za oblaganje robov

Hebrock AKV 3005 DK -F airtronic

with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm.

Technical description:
- Hot-melt adhesive application to the workpiece for edge materials up to 3 mm
- Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit
- Maintenance-free, coated gluepot
- HF end trimming station (16,000 rpm) for front and rear protruding edges
- HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side
- Spare spaces for additional machining units (Hebrock system)
- Feed approx. 10 m/min
- Cutting depth adjustment for end trim saw
- Signal lamp for workpiece sequence
- Robust chain drive
- Ergonomically arranged control panel
- Double pressure roller top beam
- Viewing windows on both rear and operator sides
- PLC control including touchscreen

Technical data:
- Feed speed: 10 m/min
- Panel thickness: 8–40 mm
- Weight (depending on configuration): approx. 1,400 kg
- Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm

Airtronic for machines up to 8 mm edge thickness, 1 piece
Technical data:
- Edge thickness: 1.2–3.0 mm possible
- Maximum panel thickness: 25 mm
- Feed speed: 7–10 m/min depending on edge material
- Ready for operation: 3 min
- Air consumption: approx. 800 l/min for entire machine
- Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw
- Extraction as usual
- PLC control is mandatory

Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness
Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius)

Buffing station (polishing wheel), 1 piece
Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm
Minimum workpiece length: 300 mm

Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device
Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation

Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device
Special cleaning system for PU glue outlet downward, 1 piece

60 mm panel thickness for machines w/ jointing, 1 piece
- Max. workpiece thickness with jointing unit: 60 mm
- Jointing range at 40 mm–60 mm
- Workpiece thickness up to 2 mm

Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness
- Max. overlay protrusion: 8 mm

Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction
- Highly recommended from AKV 3005 DK-F

Ball bearing for corner rounding unit, 24.1 mm, 1 piece
Ball bearing for corner rounding unit, 24.2 mm, 1 piece

Nesting for combination milling unit, 1 piece
- For processing workpieces with hinge cup drillings
- Only possible on underside of workpiece

Nesting for radius scraper unit, 1 piece
Lhsdpfx Ajyfp N Dsacsc
- For processing workpieces with hinge cup drillings
- Only possible on underside of workpiece

Release agent spray unit, 1 piece

Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue

Antistatic spray unit, 1 piece
- Mandatory for airtronic
- Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang

Storage location: Supplier

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.