Stroj za oblaganje robov

HOLZ-HER Triathlon 1486 V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm Ffedpfxswlbxle Abvow PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, Fedpfov Sv Ensx Abvofw End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Ffedpfx Ajvymdqobvjw Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Type of adhesive: PUR adhesive, glue application system: cartridge-based, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16 m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Includes various spare parts and return conveyor Ligmatec. Documentation available. On-site inspection possible. Fedpfx Abeugmw Eevofw

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Ffsdjyfn Tnepfx Abvow Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banders for bonding and processing flat edges using coil materials (melamine, PVC, ABS, veneer) and strip materials (solid wood, laminate, knife-cut veneers, etc.) • NC control with touchscreen • Automatic start of aggregate motors • Direct selection for second pass • Production data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material *): 0.4–10 (12) mm Workpiece projection: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air connection: 7 bar Glue pot capacity: 2 (approx.) kg *Depending on configuration. - GLUING UNIT VC-511 Applies hotmelt adhesive to the workpiece, feeds the edge material to the workpiece, automatically trims it from the coil, and presses it in place for optimal positioning. - TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a maximum thickness of 3 mm. JOINTING UNIT RT02 Joints the workpiece prior to glue application. Fitted with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing of thick PVC/ABS edges. FLAT SCRAPER UNIT RC02 For removing excess glue at the joint area between edge and panel. Equipped with tracing rollers and a straight knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edges with cloth polishing discs. The unit automatically adapts to workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Fodpfoxzb Iijx Abvefw Precision application of release agent via injectors actuated by CNC control. KIT PRO-GLUE The PRO-GLUE kit consists of the following components: • TEKNO-GLUE system for optimum gluing, featuring: - controlled glue roller pressure - automatic retraction during feed stops - automatic ON/OFF of glue section REVERSE system for glue roller operation in forward or reverse mode. Electrical and mechanical provision for the use of special glue pots for POLYURETHANE adhesive on machines configured for EVA glue. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC. Pair of multi-profile cutters for the fine trimming unit: Bevel cutter 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the sensor relative to edge thickness, controlled via the CNC. Allows activation of corner-only processing. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Tip: Enostranski robni lepilni stroj Proizvajalec: BRANDT Model: Optimat KDF 550 C Leto: 2008 Lokacija: Litva Pogoji: prodaja v videnem stanju kjer stoji Debelina plošče: 60 mm Debelina roba: 8 mm Pomik: 11 m/min Ffjdpexwwb Rjfx Abvow Dimenzije (d x š x v): 5860,0 × 1560,0 × 230,0 mm Teža: 2600 kg Podajalna hitrost: 11 m/min Debelina obdelovanca: 8–60 mm / debelina roba: 0,4–8 mm / delovna višina: 950 mm Električna napetost: 400 V – 3 faze – 50 Hz / pnevmatski pritisk: 6 bar / stopnja hrupa: 80…87 dB(A) Premer odsesavanja: 1 × 120 mm / 2 × 100 mm / razmak valjev: maks. 3,0 × 45 mm / 0,8 × 65 mm

Stanje: rabljeno, Leto izdelave: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine equipped with PLC control Feed rate: 12/16 m/min Edge infeed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensor nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Fixed milling unit up to 30 mm 1962 Milling unit MOT 5, multifunctional for flush, radius, and bevel milling 1966 Radius scraper 1927 Corner copying unit 1983 Surface scraper 1964 Buffing unit 1944 Air-blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging material thickness max.: 13 mm Fedpfjyamcwex Abvefw Weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short-term

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine in full configuration, including a total of 3 interchangeable gluing units, 1 of which is for PUR adhesive. Material dimensions: Roll materials: Ffodpfx Ajybbayjbvew - Paper and plastic edging 0.3 - 3.0 mm - Veneer edging: 0.5 - 3.0 mm - Strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Infeed fence, adjustment automatic via program Separation agent application unit Jointing milling unit with 2 motors, each 4 kW Air nozzle for removing loose particles Gluing unit with glue container 1.8 L, with QUICK-LOCK system with single roll / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors 660 W, swiveling 0 to 8 degrees Profile trimming unit with 2 motors 180 W and 2 motors 400 W max. workpiece thickness 60 mm max. feed speed 20 m/min. Automatic adjustment via program Profile scraper unit Glue joint scraper unit Cleaning agent application unit Buffing unit with 2 motors 180 W Control: ICOS open TS, PC-based