CNC-obdelovalni center z vtikanjem moznika

Holz-Her Evolution 7402 Pin-Jet

Stanje: rabljeno, številka stroja/vozila: 008147, Maks. širina panela: 1100 mm Tjdpfx Ajxqm Hieltja Maks. dolžina panela: 2500 mm Dolžina transporterja: 8100 mm Povratek kosov za robno lepilko: desno

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Tsdpfx Asrigxyeltoa Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Operator pedestal for program start; camera system with tablet PC Tjdey E Npfspfx Altsa WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) Tjdpfsfi Tg Hex Altea No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment Tjdpfx Alshlp D Netja - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Tedeg Tu Rkopfx Altoa Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: rabljeno, številka stroja/vozila: 007135, Maks. širina plošče: 800 mm Maks. dolžina plošče: 2500 mm Todpfst Hmppox Altsa Povrat delov za robno lepilko: levo

Stanje: rabljeno, Leto izdelave: 1994, Used, top condition, high-end equipment, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 interchangeable spindles, adjustable table insert Make: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor 6 / 7.5 kW Tiltable from -10° to +45° Motor brake Motor with 2 speeds / pole-changing Speed ranges: 3250/5000/6500/10,000 rpm Right and left rotation Table size: 2700 x 700 mm Spindle diameter: 15 x 30 mm / 1 x 40 mm Spindle mount: HSK Quick-change spindle system SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – cutting depth – jaw offset Tsdpfx Ajythdveltsa Guard and pressure device Control panel on top Swiveling control panel - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height / swivel / milling fence with 99 programs Digital displays for swivel angle – spindle height – fence depth Swing-away device for the milling fence Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction port: 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, function tested without refurbishment, without guarantee or warranty

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa Todpfx Aedx Axfsltea • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju

Stanje: novo, Leto izdelave: 2022, Premer: 40–140 mm Motor: 2,2 kW Cena za kos Tsdpfx Ajdprvueltsa