Stroj za robne trakove

HOLZ-HER ARTEA 1020

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Bljdpfx Afexfh Tmsqor Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine will be completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text for operating mode and error diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function in control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4500 rpm Saw blade diameter: 300 mm Air requirement: 1200 m³/h Air velocity: 20 m/s Static negative pressure: 1200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height: 2990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connected load: 5.7 kW with Supercut scoring unit with pneumatically tiltable saw unit with longitudinal stop for lower workpiece support Bledpfx Afew Nac Aoqjr with short flip rail, complete Availability: by arrangement Location: Flörsheim

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm Bljdjrmucxepfx Afqsr - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: rabljeno, Kündig Duplex 1350 KdS-E Brilliant + Lacquer Quality product from Switzerland Bledpfxow Elvze Afqsr CONSTANT PASS LINE MACHINE / Automatic Head Adjustment Wide Belt Calibrating and Fine Sanding Machine 1st Unit: Combination Unit with 90 Shore Contact Roller and Sanding Pad Unit with Electronically Controlled Segment Sanding Shoe Contact roller level infinitely adjustable according to grit scale Sanding unit tiltable for diagonal sanding Infinitely variable sanding belt speed: 3 - 18 m/sec Oscillating belt blow-off 2nd Unit: Sanding pad unit with electronically controlled segment sanding shoe Sanding belt drive motor power: 15 kW Working width: 1350 mm Max. workpiece thickness: 160 mm Feed speed infinitely adjustable: 3 - 15 m/min Stable vacuum table with lacquer carpet Automatic workpiece thickness adjustment ENORMATIC quick adjustment with feed release (for long workpieces) PLC control with LCD screen for automation and management of all work programs Infeed and outfeed tables with roller supports Machine is FULLY REFURBISHED, IN TOP CONDITION Available from stock Lieboch

Stanje: rabljeno, Leto izdelave: 2007, Pomik osi: X=4400 mm, Y=2195 mm, Z=440 mm Delovno polje v X=3650 mm, Y=1560 mm Prehodnost: 330 mm Elektrovreteno SCM Power 2000 Visokohitrostno rezkalno vreteno z močjo 13 kW Rotacijska os Vector (C-os) Ventilator za čiščenje orodja na rezkalni enoti Vpenjanje orodja HSK 63 F Hitrost vrtenja 600 – 24.000 1/min brezstopenjsko preko inverterja Moč motorja 8,5 kW Nosilci orodja: 6 kos Menjalnik orodja: Rapid 12 (12 mest) Vakuumska črpalka 250 m³/h / 5,5 kW Maks. vakuum: 0,9 bar Referenčni prisloni na straneh mize Vrtalni agregat z 11 vreteni (7 vertikalnih / 4 horizontalni) Krmiljenje: NUM serija 1000 Uporabniški vmesnik: XILOG Plus PC Office Hardware WINDOWS XP Professional Skupna priključna moč: max. 27,5 kW Teža: 5200 kg Skladišče: Nattheim Bodow Dcb Sspfx Afqjlr

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Blodpfelht Hzsx Afqer Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Prodajem kantovalni lepilni stroj Biesse JADE 240, godina proizvodnje 2019. Posebna ponuda: Mašina je skoro NOVA! Konfiguracija: - Ulazna zona ručno podešavanje - Spojno glodanje pneumatski podesivo - Lepljenje ivica ručno podešavanje - 2 lepka rezervoara za EVA lepak - Zona pritiska ručno podešavanje - Presecača pneumatski podesiva - Glodanje radijusa ručno podešavanje - Zaobljeni agregat sa 2 motora ručno podesiv - Povlačna radijus oštrica ručno podesiva - Površinska povlačna oštrica pneumatski podesiva - Polirke Prednji separator za ubrizgavanje Centralno podmazivanje Gornji valjci za uvod Blsdpjxncrvjfx Afqsr Ručna podešavanja visine Visina materijala: 10-60 mm Debljina ivice materijala: 0,4-8,0 mm Brzina uvlačenja: 12 m/min. Samo 9250 m lepljeno. Mašina je skoro NOVA! CE oznaka. Uključuje kompletnu dokumentaciju i CD-ove. Vrlo dobro stanje! Dostupno odmah!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Rabljeni robni lepilni stroj - OLIMPIC K 360 R - Letnik izdelave: 2022 - Na voljo od novembra 2025 Blsdpfxsxhc Eve Afqjr - dodatne fotografije/video na voljo

Stanje: novo, Leto izdelave: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Bedpfjg Tu Rkjx Afqslr Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: rabljeno, Leto izdelave: 2011, skupna dolžina: 4.000 mm, skupna višina: 1.600 mm, skupna širina: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units: 6 - 1st unit type: Pre-milling unit - 2nd unit type: Gluing unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit Bjdpfx Aswnicksfqslr - 5th unit type: Radius scraping unit - 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) - Transport weight [kg]: 1300kg - Number of transport packages: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels