Kombinacija ravnalke in debelinke & debelinka

Hofmann AD 635 HELIX / 7,5kW

Stanje: novo, Leto izdelave: 2022, New machine Kodpfsw I Uxcsx Adksdi Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. Kjdpfx Adsxdc Uvokedi 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Kodoi Dfidjpfx Adkodi Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Technical details: Swing over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Tailstock taper: MT2 Kjdpfx Adou Ixy Djkjdi Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TERSA nožni valj s 4 noži, motor 5,5 kW, 400 V, 50 Hz, elektronska naprava za zagon in zaviranje. Nastavljanje debelinske mize s tipkami za hitro ali počasno nastavitev, natančnost do 0,1 mm, vgrajen števec delovnih ur, debelinska miza na 4 nosilnih vretenih s štirikratnim vodenjem. Dve podajalni hitrosti: 7 + 14 m/min. Ena gumijasta vhodna in ena gumijasta izhodna valjčka. Dva odsesovalna priključka Ø 160 mm, drsnik za zgornje odsesavanje. Zaščitna naprava za skobljanje SUVAMATIC. Moč motorja 7,5 kW. Krmiljenje pozicioniranja z nadzorom senzorjev vključeno. Kdodpfx Adex Ey Tzjksi

Stanje: novo, Leto izdelave: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Slot length: 180 mm Height adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Kjdpfx Adogq Un Askedi Machine width: 960 mm Weight: 240 kg

Stanje: novo, Diameter 200 mm Height 105 mm Machine weight approx. 25 kg Kjdpfx Adshuxbrjkjdi Space requirement approx. 400 x 280 x 150 mm

Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Table height adjustment: mechanical Right and left rotation Kedpfx Adjv D H Sijkodi 2 abrasive belt speeds Abrasive belt cover on top CE compliant Includes special grinding shoe Note on used machines: • Technical specifications may contain errors; subject to prior sale. • The indicated prices are ex-works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Leto izdelave: 2024, Panhans Mortising Machine Type: 116/10 - Maximum drilling depth: 145 mm - Maximum drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm Kdjdpfor Eli Tox Adksi - Colour: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight: approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Stationary table, smooth-running, mobile drilling motor Mobility unit for increased versatility Cast table 700 x 380 mm, thick-walled and heavily ribbed Smooth-running cross slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation via left and right adjustable side stops Drill motor output 1.3 kW / 1.8 HP with motor brake and practical tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling unit for row drilling with indexing roller 16, 22, 25, and 32 mm; high-precision machined indexing, fixing via spring-loaded indexing pin Plug-in frame stop with indexing pin for positions: centre, left, right CE-compliant GS-tested Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Kündig Topiq-1100 Švicarski kakovostni izdelek STROJ S KONSTANTNO MIZO / avtomatska nastavitev glave Širokopasovni kalibracijsko-finiš brusilni avtomat Kombinirani agregat kontaktni valj in brusna blazinica z elektronsko krmiljenim segmentnim brusnim čevljem Moč pogonskega motorja traku cca 11 kW Nivo kontaktnega valja brezstopenjsko nastavljiv glede na skalo zrn Delovna širina 1100 mm Podajalna hitrost 3 - 15 m/min, brezstopenjsko nastavljiva Avtomatika nastavitve debeline obdelovanca ENORMATIC hitra nastavitev Izbira programa preko upravljanja SmartSelect Stroj je DELAVNIŠKO PRENOVLJEN v ZELO DOBREM STANJU Na zalogi Lieboch Kedpfxsyngxhe Adkedi