Grelnostiskalnica / laboratorijska stiskalnica

Hidrobrasil 10 Tonnen Vulkanisierpresse

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m Csdpfjcxxycjx Afnjgp High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Cgedpefxyhfjfx Afnsp Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2024, stanje: novo, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0–180° Cgedpfx Asd R Er Djfnjp The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t Cgodpfxjcxxx Hs Afnop

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device Cedpfx Afolgvkionjgp - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled. Cjdpfeqhkukex Afnegp

Stanje: novo, Ostas 3-Roller Plate Bending Machine ORM 1070 x 110 Technical Specifications: Special features included in the price: hardened rollers electrically powered rear roller adjustment digital display Sheet width: 1070 mm Sheet thickness: max. 5.0 mm Bending sheet thickness: 4.0 mm Roll length: 1070 mm Roll diameter: 110 mm Weight: 1000 kg Cgedpfogkwhaox Afnsp Dimensions (L x W x H): 2250 x 800 x 1100 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Swing-out top roller Cone bending device Asymmetric roller arrangement Self-braking main motor Separate control and operation panel Safety rope CE mark

Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd. Rezno območje 90° okroglo 260 mm ploščato 300x260 mm najmanjši premer 5 mm NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost Samodejna nastavitev vodila traku glede na širino materiala Priporočene opcije: poganjana krtača za ostružke, sinhronizirana s hitrostjo traku posebej postavljena nadzorna plošča 7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd. Cgodpfx Afoh Tnd Aonop

Leto izdelave: 1990, stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2.75-0.85 Cedpfx Afohcnxrjnegp H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Tischmaße (X-Y/mm): 3000×1800 Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls verfügbar

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 Cgjdpfx Aenh R Eksfnep The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance