Maloserijske stiskalnice, vulkanizerske stiskalnice

Hidrobrasil 10 Tonnen Einzelständerpresse

Design
Single-column press

Number of operation sides: 1 side
Fgedjhaqygspfx Ah Deh

Forces
Pressing force (max. at 250 bar): 100 kN
Free tear-off force (max.): 10 kN
Pressure build-up time (closed tool, steel on steel): max. 2 sec.

Dimensions
Maximum opening width: 400 mm
Stroke and minimum opening: 350 mm
Table height above floor: 850 mm
Overall height above floor (installation height): approx. 1850 mm
Minimum hall height: 2,500 mm
Total weight of the press without operating fluids: approx. 1.2 t

Speeds
Rapid closing: 10 mm/sec
Pressing speed: 10 – 0 mm/sec

Sound pressure
Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 db(A)

Hydraulics
Number of press cylinders: 1 pc.
Maximum operating pressure: 250 bar
Press pressure build-up time: 2 sec.
Pressure accuracy during pressing stroke: +/- 5 bar

Main pump
Gear pump: approx. 6 L/min
Oil volume: approx. HLP 46 MW 80 liters

Electric
Main power supply: 400 V AC
Control voltage: 24 V DC
Frequency: 50 Hz

Hydraulic connection
Main motor: 2.2 kW
Total connected load: ca. 3 kW

Additional Information
Single-column press with 10 t capacity, suitable for continuous multi-shift operation
CE Certificate
Manufactured according to EU standards
Operating manual, technical documentation in German
Robust machine body with solid welded construction, manufactured to DIN 8651
Low maintenance and reliable
Cylinder with induction hardening and chrome plating
Travel speed 0 - 10 mm/sec downward,
Opening speed up to 25 mm/sec
Initial pressing speed 10 mm/sec, adjustable from 0 to 10 mm/sec
Table size: 600x300 mm
Ram size: 300x300 mm, with T-slots and central cylinder clamping
Overall size: approx. 1100x600x1850 mm
Oil temperature gauge on the oil tank
Pressure setting from 0.5 t to 10 t (adjustable via rotary knob)
Cable remote control for downward/upward movement
Machine body powder coated or double painted
Control cabinet feed from above with 3000 mm cable and 16-amp plug
Assembly, commissioning, and training available at additional cost

Equipment
Control system: Siemens
Hydraulic components: Bosch Rexroth

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.