Hidravlična stiskalnica

Hidralmac 500T Säulenpresse

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, Pressure: 500 t Passage width: 2100 x 1500 mm Stroke: 1000 mm Total power requirement: 62 kW Approx. machine weight: 39 t Dimensions L x W x H: 5100 x 2800 x 4040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter, main cylinders: 360 mm Table size: 2100 x 1500 mm with T-slot Ram size: 2100 x 1500 mm Table height above floor: approx. 850 mm Advance speed: 300 mm/sec Return speed: 300 mm/sec (at 20 t ram weight) Pressing speed, pressure phase: 200 t = 28 mm/sec Oil tank: approx. 1000 l Auxiliary cylinders: 2 units Column diameter, auxiliary cylinders: 120 mm Overall table plate size: approx. 2750 x 1600 mm Overall ram plate size: approx. 2750 x 1600 mm Pressing speed, pressure phase: 300 t = 20 mm/sec Pressing speed, pressure phase: 500 t = 6 mm/sec Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance working table – ram plate): 1500 mm Hydraulic manifold: REXROTH Pressure control: via PLC (min. pressure 50 t) Cylinders: 4 x Ø90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector forward speed: 95 mm/sec Ejector return speed: 240 mm/sec Capacity: 4 x 15 t at 250 bar Pressure adjustment: via monitor from 50-500 t Pressure holding time: 0–900 sec Hydraulic tank: 2000 l Control system Siemens: S7 300 Program memory: 200 programs Electronics by German manufacturers: SIEMENS/MÖLLER Control panel: on swivel arm Photoelectric sensors Sick: 1500 mm on the front side Control System Functionality: The linear encoder continuously transmits the ram and ejector positions to the controller. Travel distance, upper stop position, and switching point (where the press changes from rapid approach to working speed), as well as the target end position, can be easily and quickly entered via the monitor control. Working speed can be adjusted in 1 mm/sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm. Additionally, the machine features pressure monitoring which, upon reaching the desired pressure, either returns the ram to the top position or holds the pressure at the set level (within 5% tolerance) for the preset time, then opens. The control system monitors secured areas, the entire hydraulic system, pumps, and temperature. It also synchronizes the main cylinders and compensates for unilateral overloads. The control system is housed in a separate control cabinet. The actual press operation is performed via a control panel mounted on a swivel arm, thus reducing movement distances for the operator. Additional Equipment: • Polycarbonate glass 8 mm in the rear door interior • Polycarbonate glass 8 mm in the side doors of the work area and within the work area • Liquid channel with 25 mm radius on the front, rear, and sides of the table Special Features of the Press: • Incl. 10% reserve (max. capacity 550 t) • Steel grade: Stainless steel LCG ASTM A36, manufactured according to DIN 8651 • Motor and pump automatically stop once the tool is closed and compensate for 5% pressure loss, providing significant cost savings Nodpfsdyynvsx Abbocl Nitrogen Compression Unit: The scope of delivery includes a nitrogen compression unit capable of generating an instantaneous pressure of 280 bar, which can be switched on and off as needed.

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Berstorff mixing mill 400 x 900 mm Nodpfxjr A Dfys Abbocl For more details, see the attached description!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Ncjdour Hfzopfx Abbol

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Nsdpfxjf Rt Iro Abbjcl

Leto izdelave: 1999, Stanje: rabljeno, Tractive force – max. 6.0 t Ram stroke – max. 1250 mm Ncedpfx Absd Il A Njbjl Space requirement approx. 1.20 x 1.20 x 3.25 m

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Nodpot Hwupsfx Abbjcl Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Leto izdelave: 2006, Stanje: generalkompletno obnovljen (rabljeno), HYDRAULISCHE PRESSE MECAMAQ PRESSKRAFT: 350 t HUB: 350 mm TISCHVERFAHRWEG LINKS-RECHTS: 600 mm TISCHVERFAHRWEG VORNE-HINTEN: 750 mm ANTRIEBSLEISTUNG: 15 kW Abmessungen: Njdpfjfmqqlsx Abbocl Höhe: 2,9 m Breite: 1,9 m Länge: 1,3 m Gewicht: 5.700 kg

Leto izdelave: 1971, Stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Mandrel Ø: 508 mm Njdpsd Ha E Ssfx Abbecl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Nodpoph Uk Nsfx Abbjcl Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Siemens control system Nodowh U Edopfx Abbocl Bar capacity 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar loading magazine