Vzorčni tisk

Hidralmac Viersäulenpresse

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, stiskalna sila: 400 t, Clear passage width: 2,500 mm Stroke: 900 mm Total power requirement: 62 kW Machine weight: approx. 27.5 t Gsdpoin Et Njfx Ad Asip Dimensions (L x W x H): approx. 3,950 x 2,200 x 4,850 mm Retraction force: 40 t Main cylinders: 2 units Column diameter: 220 mm Installation height: 1,300 mm Table size: 2,500 x 1,600 mm Ram size: 3,100 x 1,600 mm Table height above floor: approx. 900 mm Forward speed: 200 mm/sec Return speed: 200 mm/sec Working speed: 5 - 15 mm/sec Oil tank: 1,500 l Oil quantity: 1,200 l Adjustable pressure control: 50 - 400 t Drawing cushion: 1,400 x 800 mm Drawing unit capacity: 30 - 60 t Drawing cushion stroke: 250 mm Drawing cushion speed: 5 - 80 mm/sec Robust machine frame with solid welded construction Low maintenance and reliable Piston rod with induction hardening and chrome coating T-slots as per customer specifications, if not specified: 22 mm according to DIN CE certificate Manufactured according to EU standards Operating manual, technical documentation, and papers in German Machine steel: LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front and rear: Sick 1,300 mm Hydraulic components: Bosch Rexroth Monitor: Siemens 12-inch Electrical control cabinet for wall mounting Press interior illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: pump idle power consumption reduced to approx. 2 kW Remote monitoring for remote maintenance Two-hand operation on movable stand Additional Information: Pressure build-up up to 400 t within max. 4 seconds after tool closure Left side of the press closed by door (1,000 x 800 mm) with crossbars Ø 20 mm Right side of the press closed by door (1,000 x 800 mm) with crossbars Ø 20 mm The press can be operated manually, semi-automatically, or fully automatically.

Stanje: rabljeno, Leto izdelave: 2006, x-axis travel 1,000 mm y-axis travel 1,000 mm z-axis travel 1,200 mm C-axis 360 x 0.001° A-axis ° Control: SINUMERIK 840D Powerline SIEMENS Table size 900 x 700 mm Milling spindle taper HSK-A100 Spindle speeds – stepless up to 12,000 rpm Tool magazine: chain magazine, 180 positions Total power requirement 85 kW Machine weight approx. 20.5 t Space requirement approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control system: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC swivel rotary table Rotoclear window Prepared for probe Blum laser tool measurement Vibration sensor Godpjw E Nnnjfx Ad Ajip Tool taper cleaning 4th operating mode ICS with 2 pumps, 40 bar and 80 bar Chip conveyor Band filter system Mist and smoke separator Cooling/heating unit

Stanje: novo, Leto izdelave: 2017, številka stroja/vozila: DF0152, stiskalna sila: 80 t, Pressure: 80 t Stroke: 500 mm Total power requirement: 12 kW Machine weight approx.: 5.1 t Operation: Two-hand control Cylinders: 1 Working height: 800 mm Working area: 800 x 800 mm Table size: 800 x 800 mm Ram plate: 2800 x 1300 mm Table height: 800 mm Approach speed: 9.8 mm/sec Working speed: 9.8 mm/min Return speed: 18 mm/sec Travel path: 700 mm Column diameter: 75 mm Motor for deep drawing function: 10 kW Main motor: WEG 15 kW Pump: REXROTH, Parker electronic axial piston pump, kW rating Blank holder cushion capacity: 25 t (at 280 bar) Blank holder cushion stroke: 200 mm Blank holder cushion rod diameter: 30 mm Blank holder cushion travel speed: 80 mm/sec Hydraulic block: REXROTH/Parker Hydraulic valves: REXROTH/Parker Hydraulic tank: 300 L Hydraulic tank oil requirement: approx. 250 L Hydraulic pressure control: via PLC (minimum pressure 10 t) Hydraulic air cooling: for oil cooling, with electric fan Hydraulic lubrication for guides: manual, via grease nipples or cartridges Electronic components: SIEMENS / MOELLER Control panel: on swivel arm Control: automatic via two-hand operation with key switch, manual via control panel in setup mode Operation: movable two-hand operation USB interface: for data transfer Remote control: Siemens for remote maintenance Spacer sensors: for stroke length adjustment Pressure hold: 0–10 sec. Oil tank: 150 l Gedpfefxyh Hjx Ad Aoip Safety light curtains by Schmersal: 800 mm long, front and rear, 300 mm diagonal at the bottom.

Stanje: rabljeno, številka stroja/vozila: 4396, stiskalna sila: 200 t, Pressure: 200 t Frame gap: 1200x1000 mm Stroke: 600 mm Total power requirement: 32.5 kW Machine weight approx.: 20.5 t Return force: 20 t Main cylinder: 1 piece Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Axial piston pump: Rexroth/Bosch Installation height: 800 mm Working area: 1200x1000 mm Table and ram plate: 1200x1000 mm Working height: 1100 mm Forward speed: 170 mm/sec Return speed: 150 mm/sec Pressing speed: 15 mm/sec Oil capacity: 500 l Socket: 220 V Storage capacity: 200 programs Pressure setting: 20–200 t via monitor Giedpjfxyh Ajfx Ad Aep Speed adjustable in automatic and semi-automatic mode: 5–170 mm/sec Pressure holding time: 0–10 sec Setup mode speed: 2–10 mm/sec Drawing cushion: 750x950 mm Drawing cushion stroke: 300 mm Drawing cushion force: 5–50 t Drawing cushion speed: 2–80 mm/sec Drawing cushion weight: 1000 kg Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as CE declarations (all provided in duplicate, both printed and on data storage devices) - 1 set of seals and filters

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 19.853 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11170000963, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 5-Achs-Simultanbetrieb Drehzahl: 18.000 U/min Giodpfx Adjwqp Hus Ajp Werkzeugwechsler: 60 Plätze / SK 40 DIN69871 Werkzeuge im Preis enthalten IKZ (Innenkühlung) / Blasluft Heidenhain Steuerung 426/430

Stanje: rabljeno, Leto izdelave: 2017, stiskalna sila: 500 t, Pressure: 500 t Clear passage width: 1300 x 800 mm Stroke: 600 mm Approx. machine weight: 18 t Space requirement approx.: 2400 x 2400 x 5500 mm Return force: 50 t Operation: two-hand control Cylinders: 1 unit Motor: 50 kW Oil cooling: electric Column diameter: 200 mm Working height (distance between ram & table plate): 700 mm Table size: 1900 x 800 mm Table height above floor approx.: 1000 mm Ram plate: 1300 x 800 mm Fast approach speed: 150 mm/sec Working speed: 5-10 mm/sec Return speed: 150 mm/sec Oil tank: 1500 l Oil volume: 1400 l Functionality of the control system: The linear scale continuously relays the position of the ram and the ejector to the control unit. The travel distance, the upper limit position and the switching point—where the press should change from rapid traverse to working speed—as well as the end position to be reached can be easily and quickly input via the monitor control panel. The working speed can be set in 1 mm/sec increments from 2 to 15 mm and in 10 mm increments from 15 to 150 mm. Additionally, the machine features pressure monitoring, which can either automatically return the ram upwards upon reaching the desired pressure, or hold the pressure constant (within a 5% tolerance) for a defined period, and then open. The control system monitors the secured zones, the entire hydraulics, the pumps, and the temperature. It also synchronizes the main cylinders and compensates in case of unilateral overload. The control unit is housed in an attached control cabinet. The press is operated via an adjustable two-hand control unit, reducing unnecessary steps for the operator. Additional information: Included in the offer are detailed 3D drawings, which must be reviewed and approved by the customer. Giedpfsd E Irmsx Ad Aop The columns and cylinders are made from tool steel, induction-hardened and chrome-plated on the outside. The ram guides are manufactured using bronze slide bushings. Scope of supply includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE declaration (each in duplicate) - Safety inspection carried out by a qualified company - The machine complies with the EU Machinery Directive 2006/42 (Hydraulic Presses) and DIN EN 693/2011

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, stiskalna sila: 500 t, Pressure: 500 t Passage width: 2100 x 1500 mm Stroke: 1000 mm Total power requirement: 62 kW Approx. machine weight: 39 t Dimensions L x W x H: 5100 x 2800 x 4040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter, main cylinders: 360 mm Table size: 2100 x 1500 mm with T-slot Ram size: 2100 x 1500 mm Table height above floor: approx. 850 mm Advance speed: 300 mm/sec Return speed: 300 mm/sec (at 20 t ram weight) Pressing speed, pressure phase: 200 t = 28 mm/sec Oil tank: approx. 1000 l Auxiliary cylinders: 2 units Column diameter, auxiliary cylinders: 120 mm Overall table plate size: approx. 2750 x 1600 mm Overall ram plate size: approx. 2750 x 1600 mm Pressing speed, pressure phase: 300 t = 20 mm/sec Pressing speed, pressure phase: 500 t = 6 mm/sec Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance working table – ram plate): 1500 mm Hydraulic manifold: REXROTH Pressure control: via PLC (min. pressure 50 t) Cylinders: 4 x Ø90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector forward speed: 95 mm/sec Ejector return speed: 240 mm/sec Capacity: 4 x 15 t at 250 bar Pressure adjustment: via monitor from 50-500 t Pressure holding time: 0–900 sec Hydraulic tank: 2000 l Control system Siemens: S7 300 Program memory: 200 programs Electronics by German manufacturers: SIEMENS/MÖLLER Control panel: on swivel arm Photoelectric sensors Sick: 1500 mm on the front side Control System Functionality: The linear encoder continuously transmits the ram and ejector positions to the controller. Travel distance, upper stop position, and switching point (where the press changes from rapid approach to working speed), as well as the target end position, can be easily and quickly entered via the monitor control. Working speed can be adjusted in 1 mm/sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm. Additionally, the machine features pressure monitoring which, upon reaching the desired pressure, either returns the ram to the top position or holds the pressure at the set level (within 5% tolerance) for the preset time, then opens. The control system monitors secured areas, the entire hydraulic system, pumps, and temperature. It also synchronizes the main cylinders and compensates for unilateral overloads. The control system is housed in a separate control cabinet. The actual press operation is performed via a control panel mounted on a swivel arm, thus reducing movement distances for the operator. Gisdpfxedyynvo Ad Aep Additional Equipment: • Polycarbonate glass 8 mm in the rear door interior • Polycarbonate glass 8 mm in the side doors of the work area and within the work area • Liquid channel with 25 mm radius on the front, rear, and sides of the table Special Features of the Press: • Incl. 10% reserve (max. capacity 550 t) • Steel grade: Stainless steel LCG ASTM A36, manufactured according to DIN 8651 • Motor and pump automatically stop once the tool is closed and compensate for 5% pressure loss, providing significant cost savings Nitrogen Compression Unit: The scope of delivery includes a nitrogen compression unit capable of generating an instantaneous pressure of 280 bar, which can be switched on and off as needed.

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system Gsdpfollvr Dox Ad Aeip - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), Underfloor press Pressing force: 300 kN Pressing area: 300 x 300 mm Gsdpfx Aokuz T Ujd Ajip Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Stanje: dober (rabljeno), Leto izdelave: 2003, Tehnični podatki so na slikah. Gijdpfsx R S R Nsx Ad Ajp