Hidravlična stebrna stiskalnica

Hidralmac 500 T Säulenpresse 2100 x 1500 mm

Pressure: 500 t
Passage width: 2100 x 1500 mm
Stroke: 1000 mm
Total power requirement: 62 kW
Approx. machine weight: 39 t
Dimensions L x W x H: 5100 x 2800 x 4040 mm
Retraction force: 40 t
Main cylinders: 2 units
Column diameter, main cylinders: 360 mm
Table size: 2100 x 1500 mm with T-slot
Ram size: 2100 x 1500 mm
Table height above floor: approx. 850 mm
Advance speed: 300 mm/sec
Return speed: 300 mm/sec (at 20 t ram weight)
Pressing speed, pressure phase: 200 t = 28 mm/sec
Oil tank: approx. 1000 l
Auxiliary cylinders: 2 units
Column diameter, auxiliary cylinders: 120 mm
Overall table plate size: approx. 2750 x 1600 mm
Overall ram plate size: approx. 2750 x 1600 mm
Pressing speed, pressure phase: 300 t = 20 mm/sec
Pressing speed, pressure phase: 500 t = 6 mm/sec
Ram retraction force: 40 t
Control circuit voltage: 24 V
Voltage: 400 V
Frequency: 50 Hz
Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min
Installation height (distance working table – ram plate): 1500 mm
Hydraulic manifold: REXROTH
Pressure control: via PLC (min. pressure 50 t)
Cylinders: 4 x Ø90 x 70 mm
Stroke length: 300 mm, adjustable via PLC
Ejector forward speed: 95 mm/sec
Ejector return speed: 240 mm/sec
Capacity: 4 x 15 t at 250 bar
Pressure adjustment: via monitor from 50-500 t
Pressure holding time: 0–900 sec
Hydraulic tank: 2000 l
Control system Siemens: S7 300
Program memory: 200 programs
Electronics by German manufacturers: SIEMENS/MÖLLER
Control panel: on swivel arm
Photoelectric sensors Sick: 1500 mm on the front side

Ibodsdyynvjpfx Ah Djc
Control System Functionality:

The linear encoder continuously transmits the ram and ejector positions to the controller. Travel distance, upper stop position, and switching point (where the press changes from rapid approach to working speed), as well as the target end position, can be easily and quickly entered via the monitor control.
Working speed can be adjusted in 1 mm/sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm.
Additionally, the machine features pressure monitoring which, upon reaching the desired pressure, either returns the ram to the top position or holds the pressure at the set level (within 5% tolerance) for the preset time, then opens.
The control system monitors secured areas, the entire hydraulic system, pumps, and temperature. It also synchronizes the main cylinders and compensates for unilateral overloads.
The control system is housed in a separate control cabinet. The actual press operation is performed via a control panel mounted on a swivel arm, thus reducing movement distances for the operator.

Additional Equipment:

• Polycarbonate glass 8 mm in the rear door interior
• Polycarbonate glass 8 mm in the side doors of the work area and within the work area
• Liquid channel with 25 mm radius on the front, rear, and sides of the table

Special Features of the Press:

• Incl. 10% reserve (max. capacity 550 t)
• Steel grade: Stainless steel LCG ASTM A36, manufactured according to DIN 8651
• Motor and pump automatically stop once the tool is closed and compensate for 5% pressure loss, providing significant cost savings

Nitrogen Compression Unit:

The scope of delivery includes a nitrogen compression unit capable of generating an instantaneous pressure of 280 bar, which can be switched on and off as needed.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.