Merilni sistem

Hexagon Primescan

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Bjdpfx Astuuvzebxolp Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Bledpfx Aolqac Sobxjp Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. This also depends on tool lengths, machining lengths on the component, etc.

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno), Mobile 3D coordinate measuring device Keyence WM-3000 Bsdpfemrrb Ssx Abxslp As-new condition, being sold due to new acquisition Technical specifications available from the manufacturer Inspection possible in 47877 Willich

Stanje: rabljeno, številka stroja/vozila: 109369/109370, Technical Data Manufacturer: ZEISS Serial No.: 109369/109370 Table is split in the middle Measuring Table Length = 6000 mm Width = 3000 mm Height = 350 mm The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly provide you with a detailed offer! Note: Our offer is directed exclusively at professional customers! (Subject to changes and errors in technical data, specifications and prices, as well as prior sale!) Blsdpfxedbi Nle Abxop

Stanje: novo, TECHNICAL SPECIFICATIONS: Stainless steel materials V2A 304ss or V4A 316ss can be used, depending on the preferred surface treatment. The sidewalls of the tank are insulated with 50 mm glass wool. Tanks requiring heating can be equipped with a serpentine heater or electric heating. Temperature control is digital, with monitoring provided. If required, an air mixing device can be added to the tanks. Stainless steel ball valves are used for drainage in the tanks. OPERATING PRINCIPLE: The process is based on surface cleaning and treatment by placing the material to be treated into baskets, immersing them using a crane in tanks with chemicals and/or water, and allowing them to remain there for a set period. The aim is to remove any existing oil film from the metal surface and to generate a thin film that improves paint adhesion and increases resistance to external influences. Bledpfxofw N Rts Abxop FIELDS OF APPLICATION AND ADVANTAGES: Fields include the automotive sector, household goods, lighting industry, and general engineering—especially in applications where no continuous production is necessary, or where high and consistent quality with less manpower is required in facilities where alternate solutions are unavailable due to the material's shape or size, or where very high capacities cannot be achieved. Chemical and temperature values can be optionally monitored and controlled through automation. APPLICATION: Immersion-type surface cleaning applications vary depending on the requirements and strength needed for each sector. As illustrated by these two main applications: - Iron phosphate surface treatment - Zinc phosphate surface treatment Additionally, cleaning and degreasing processes can also be performed. Optional equipment for the immersion tank: * Drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the operating principle of drying ovens—serving as the final step in immersion-type surface cleaning equipment—is similar to that of box ovens. However, to suit immersion-type surface cleaning systems, the lid sections are arranged on the top of the oven, and the surface cleaning parts are dried in the same basket. With this drying system, parts are placed in the drying oven and are ready for painting after drying.

Stanje: rabljeno, Leto izdelave: 1996, Workpiece diameter: 240 mm Distance between centers: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Bodpfjt Hwvmox Abxjlp Machine weight approx.: 5000 kg Space requirement: approx. [field missing] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year: 1996, #74 105 Min./max. gear diameter: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm Crowning (approx.): 0.5° Workpiece clamping length (approx.): 500 mm Max. workpiece oscillation (approx.): 3,000 mm Honing tool Ø outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Honing tool dressing speed: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight: approx. 5,000 kg Accessories / Special equipment: - SIEMENS CNC path control Type 810 G enables input of all relevant gear data and easy workpiece setup via dialog with the control system. - With DNC interface RS 232 for data import/export. - A-axis = helix angle/Z-axis = table movement/X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning system - With built-in device for automatic threading of the honing wheel into the tooth gap - The tool swivel angle (A-axis) is also moved electronically, quickly and precisely, and hydraulically clamped—this also means faster setup times. - Hydraulic workpiece clamping via foot switch between workpiece headstock and tailstock, both units are adjustable on the workpiece table depending on the part - Complete machining area enclosure with sliding doors and safety interlock - Sophisticated original REISHAUER honing oil conditioning unit Type RTO 40.10, with centrifuge and cooling unit for stable oil temperature, oil mist filter, etc. - Various diamond dressing tools mounted on mandrels - Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit

Leto izdelave: 1972, stanje: rabljeno, This machine is available three times. Specifications: Manufacturer: Landis Model: FRM 50 E-8 Year of manufacture: 1972 Quill stroke: approx. 100 mm Spindle distance in retracted position: approx. 550 mm Maximum workpiece diameter: 75 mm Travel per unit: 200 mm Drive power: 8.5 kW / 750 rpm 12 kW / 1450 rpm 18 kW / 2960 rpm Note: The machine is set up for Ø20 mm and 65 mm length. Accessories: with magazine Bjdpfjg Umitex Abxelp

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, Heller FMS z 2 x H2000 Proizvajalec stroja / Tip: HELLER H2000 Delovnih ur: 59654 Letnik proizvodnje: 2016 Nadzorni sistem: Siemens 840D SL Vreteno: PC63 10.000 vrt/min, 38 kW, 242 Nm Sistem za vpenjanje orodja: SK40 Magazin / Število mest: Verižni magazin / 160 mest Udoben upravljalni terminal, vzporedna priprava med delovanjem Rotacijska miza: 360.000° X 0,001° Hladilni sistem: Knoll KF 400/50 bar Delovni prostor XYZ (mm): 630 / 630 / 630 Velikost palete (mm): 500 X 400 Vpenjanje obdelovanca: Mehansko Dodatne možnosti, posebnosti: Nadzor loma svedra (SBBK); vmesnik FMS, infrardeči sprejemnik-tipalo (Renishaw), vmesnik za odsesavanje; hladilnik hladilne tekočine Proizvajalec stroja / Tip: HELLER H2000 Delovnih ur: 60546 Letnik proizvodnje: 2016 Bsdpfx Ajwbt Rrobxolp Nadzorni sistem: Siemens 840D SL Vreteno: SC63 16.000 vrt/min, 40 kW, 96 Nm Sistem za vpenjanje orodja: SK40 Magazin / Število mest: Verižni magazin / 240 mest Udoben upravljalni terminal, vzporedna priprava med delovanjem Rotacijska miza: 360.000° X 0,001° Hladilni sistem: Knoll KF 400/50 bar Delovni prostor XYZ (mm): 630 / 630 / 630 Velikost palete (mm): 500 X 400 Vpenjanje obdelovanca: Mehansko Dodatne možnosti, posebnosti: Nadzor loma svedra (SBBK); vmesnik FMS, infrardeči sprejemnik-tipalo (Renishaw), vmesnik za odsesavanje; hladilnik hladilne tekočine Proizvajalec stroja / Tip: FASTEMS FPC750 z dodatnim kontejnerjem Delovnih ur: Števec ni nameščen Letnik proizvodnje: 2016 Nadzorni sistem: FASTEMS Pomnilniški prostori: 24 pomnilniških mest, 2 mesta za pripravo Vpenjanje obdelovanca: Mehansko Dodatne možnosti, posebnosti: 20 palet vključno Dodatne informacije in tehnični podatki so na voljo na zahtevo.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-4BR125, DEMAG KBK crane runway (overhead crane system), approx. 33 x 6.5 m, including 4 cranes Load capacity / lifting capacity: 4x 125 kg (0.125 t) The crane system can also be shortened to half its length. Technical data of the system: Crane runway made of Demag KBK2 / KBK2T tracks The system is delivered complete: KBK tracks, track connectors, travel carriages, end plates, cable trolley, power feed system, mounts/hangers, etc. Including 4 bridge cranes with 125 kg chain hoists: 3x Demag DC-COM + 1x Stahl Bedpfx Abom Tvvioxjlp The crane has been dismantled and is available immediately. Very good used condition. Please see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only. Demag KBK1, KBK2 and KBK3 tracks are in stock! Other KBK crane systems available. Load capacities from 125 kg to 1,600 kg. Please enquire about crane runways with required load capacity and dimensions.

Stanje: novo, Leto izdelave: 2025, Are you looking for a genuine nameplate laser marking machine and not a toy? Then you are in the right place: (* Prices depend on equipment and laser power; this is a brand-new laser machine manufactured by us) Bodpodgfgcsfx Abxslp skyLaser Mark Laser Marker - 20W 2D software, optional 3D fiber laser engraver/marking laser is the complete solution for your complex laser processing needs - Nameplate Laser Machine Please note, compare the installed components in the offered laser systems: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, cables – all components are exclusively made in Germany! The laser systems are 100% custom-built to customer specifications at our plant in Plauen! Competitors often use Chinese-made components (starting with the controller: EZCAD = Chinese origin!) (* The price may vary depending on configuration. Images show different equipment options. You will receive a brand-new laser machine directly from our factory.) Ideal solution for: - Product marking - Laser marking - Laser engraving - Laser cleaning - Laser ablation Our skyLaser Mark nameplate laser systems are used exactly where conventional CO2 laser technology reaches its limits. Using a fiber laser with a wavelength of 1064nm, even the finest structures can be created in almost any material. The advantage in your application is geometric flexibility and high processing accuracy. Regardless of the hardness of the workpiece, this type of processing can be applied. The adjustable and mobile worktable further increases system flexibility. You can easily integrate the system into your production line or use it as a stand-alone solution. Our skyLaser Mark provides highly precise and durable markings (laser engravings) and is especially suitable for the nameplate laser machine application area: metals and certain organic materials. A wide variety of fonts can be used, and applying barcodes, serial numbers, logos, and images is effortless. Thanks to the outstanding resolution, virtually all marking requirements can be fulfilled. The production of embossing stamps, engravings, labels, and complex fine structures is made easy with extremely user-friendly software. Even very complex and demanding marking tasks can be easily set up on the supplied industrial PC. Precise positioning is quick and simple, thanks to the optional observation camera for process monitoring and software-assisted workpiece alignment. As the system has virtually no wearing parts and, thanks to IPG laser technology, is nearly maintenance-free, it is particularly suitable for industrial applications and continuous operation. skyLaser Marking/Engraving Laser at a Glance: Working area: from 110 x 110 mm, or 120 x 120 mm, up to 300 x 300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W