Mobilni 3D koordinatni merilni stroj

Keyence WM-3000

Leto izdelave: 2022, Stanje: pripravljen za uporabo (rabljen), Dodatna oprema: - Merilna glava WM 3000 - USB kabel - Napajalnik - Merilna sonda WMP3000 - Konica sonde Ø 5 mm - Kalibracijska naprava - Stojalo - 3D-CAD programski dodatek Hodpfxex D Sdaj Af Teng - Transportni kovček - 4x baterije za merilno sondo KEYENCE WM 3000 je bil izdelan leta 2022. Zanesljiv CMM stroj, ki omogoča natančne dimenzijske meritve in nadzor kakovosti. Idealen za industrije, kjer so potrebne visoke točnosti pri kontroli komponent. Za več informacij o stroju nas kontaktirajte. Vrsta uporabe: Meritve

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), Maks. brusni premer: 300 mm, Maks. brusna dolžina: 1950 mm, Maks. dolžina obdelovanca: 2000 mm Maks. hitrost podajanja: 1 – 30 m/min Hnodpfjhq Uigex Af Tog Dovod hladilne tekočine: 100 l/min Neskončno nastavljiv razpon hitrosti: 2.000 – 6.000 min⁻¹ (vrt/min) Vreteno: 88 mm Višina konic: 150 mm Brusni koluti: 100 – 250 mm Moč vretena: 3,5 kW Moč brusilke: 15 kW – 380 V – 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Mobile 3D coordinate measuring device Camera, hand probe with display Max. measuring length: 10,000 / 3,500 / 3,500 mm Certified measuring range: 3,000 / 1,500 / 1,500 mm Triple camera Hsdpju S Rnljfx Af Teng Integrated probe camera Measuring accuracy: ±(28 + 5 L/1000) μm* Repeatability: ±10 μm* Accessories

Stanje: dober (rabljeno), Leto izdelave: 2022, Oprema: Na voljo je tipska ploščica, Tehnični podatki - KEYENCE WM 3000 Dodatna oprema - Merilna glava WM 3000 - USB-kabel - Napajalnik - Merilna sonda WMP3000 - Merilna konica Ø 5 mm - Kalibracijska naprava - Stojalo Hnedpfxow Sviqo Af Tog - Dodatna programska oprema 3D-CAD - Transportni kovček - 4x baterije za merilno sondo

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Hnjdpfx Ajfd Abaof Teg Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Leto izdelave: 2020, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Mobile 3D Coordinate Measuring Device – Flexible 3D Measurements at Any Location Image-Guided 3D Coordinate Measuring Device Keyence Measuring System WM-3000 Coordinate Measuring System XM-2000, XM-1600 Digital Inspection Station TECHNICAL DETAILS Camera Sensor: 4 MP CMOS Measuring Range: 600 x 300 x 200 mm Smallest Display Unit: 1 µm Minimum Angle: 0.0001° Repeatability (locked): ±3 µm Table Load Capacity: max. 25 kg Display: 15" TFT Initial Acquisition: 12/2020 Coordinate Measuring System Probe Head: WM-3000 Camera Tripod: WM-S1 Tripod Extension / Base for Probe Head: WM-EX1 Measurement Software: incl. Laptop Additional Software 3D CAD Import/Export: WM-H1C WM Battery Charger: WM-BC1 Probe Battery: WM-B1 Stylus: OP-88422; 2.5 mm Mouse: WM-M30D User Manual: German Euro AC Power Cable: OP-99032, OP-99033 Attachments for Camera Realignment: OP-88546 Calibration Cone for Needle Probe: OP-88547 Magnets for Camera Realignment Attachments: 972344 Digital Inspection Station Probe Head: XM-2000 Digital Inspection Station Control Unit: XM-1600 Additional Software 3D CAD Import/Export: XM-H1C XM Mouse, Keyboard: XM-M26E User Manual: English AC Power Cable: OP-99031 MACHINE DETAILS Main Electrical Connection: 24 V Hsdepz Ityopfx Af Tjng Probe Head Weight: 25.0 kg Tripod Weight: 4.5 kg Extension Weight: 4.0 kg

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Hnjdpfsxdc Upex Af Tsg Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, inspection on site possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Valilnica na prodaj – nepremičnina vključuje 15 stavb in 6 hektarjev zemljišča. Nahaja se na industrijskem območju Karhula v bližini mesta Kotka na jugovzhodu Finske. Valilnica Karhulan Valimo je bila ustanovljena v 80-ih letih 19. stoletja. Leta 1902 se je valilnica združila z obratom za brušenje lesa, steklarno, opekarno in strojno delavnico ter skupaj tvorili podjetje Karhula Oy. Leta 1915 so tovarne Karhula prešle v last korporacije Ahlström. Trenutna valilnica je bila zgrajena leta 1960, leta 2000 pa je podjetje Ahlström valilnico prodalo podjetju Sulzer Pumps Finland. Leta 2016 je Sulzer Pumps sprejel odločitev o zaprtju valilnice in jo prodal družbi Karhulan Foundry Oy, ki je žal v marcu 2021 pristala v stečaju. Valilnica je bila skozi zgodovino poznana po proizvodnji tehnično zahtevnih ulitkov, še posebej iz visoko legiranih jekel. Leta 2022 je podjetje Karhu Assets Oy prevzelo objekte in stroje valilnice. Večina opreme v čistilnici ulitkov je že prodana, večina strojev v oddelku za pripravo modelov in talilnici pa je še vedno na voljo. Vsi peči za toplotno obdelavo, skupaj 10 enot, so na lokaciji in so naprodaj. Vabljeni na ogled! Oprema se nahaja v mestu Kotka, na naslovu 48600, Finska ter se prodaja po pogoju EXW Kotka, v stanju, v kakršnem je. Letalski čas iz večine evropskih mest do Helsinkov je približno 2 uri, vožnja iz Helsinkov do Kotke po avtocesti pa znaša približno 120 km (1 ura). Vabimo vas, da nas osebno obiščete in si ogledate opremo valilnice! Rabljeno stanje: Vsi stroji, oprema in artikli se prodajajo kot rabljeni. Brez garancije, menjave ali jamstva: Prodajalec na prodane artikle ne nudi nobenih garancij ali jamstev. Menjava ali vračilo blaga ni mogoče, kupec sprejme vse rizike povezane z nakupom. Hsdpfx Afjuxmt To Teng Ogled na lokaciji: Kupec mora blago pred nakupom pregledati na lokaciji, saj je prodaja po pregledu dokončna. Prodajalec ni odgovoren za morebitne napake, ugotovljene po opravljenem nakupu.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V Hnedpsqfcvijfx Af Tjg • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Leto izdelave: 1990, Stanje: delavnici obnovljeno (rabljeno), Surface grinding machine Brand: Jakobsen Model: 1432 Hsdpfsiv S Avjx Af Tong Year: 1990 RPM: 1400 Grinding area: 800x400 mm Table size: 1000x350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350x50x127 mm Heidenhain ND 221B digital readout. Selter electronic magnetic table 800x350 mm with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET filter from 2007. Includes sets of grinding wheels (see photographs).