Stroj za oblaganje robov

HEBROCK AKV 3006 DK-F

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier Nodox S Hmzspfx Advokw

Stanje: rabljeno, Leto izdelave: 2012, skupna višina: 1.600 mm, skupna dolžina: 5.250 mm, skupna širina: 1.440 mm, Machine à placage de chants HEBROCK AKV 3006 DK FS Épaisseur de chant maximale : 3/8 mm Épaisseur minimale/maximale de la pièce : 10/40 mm Njdpfx Aownhb Sedvokw Longueur minimale de la pièce : env. 200 mm Largeur minimale de la pièce : env. 80 mm Vitesse d'avance : env. 10 m/min Prête en env. 6 minutes. Puissance maximale absorbée : 12 kW Raccordement électrique : 400 V / 3 Ph / 50 Hz Pré-fraisage Unité d’encollage Rouleau de pression Scie à recouper Unité de fraisage Unité de fraisage Arrondisseur d’angles Racloir à rayon Racloir plat Unité de nettoyage Dimensions (L x l x h) : 5250 x 1445 x 1600 mm, Poids : 1550 kg - Année de construction : 2012 - Documentation disponible : Non - Certificat CE disponible : Non - Dimensions de transport : 5250mm x 1445mm x 1600mm (L x l x h) Informations financières : TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Yorick Diebels

Stanje: zelo dobro (rabljeno), Hebrock AKV 3006 DKF stroj za lepljenje robov Predhodno rezkanje Nsdpsylpr Eefx Advokw Lepljenje Prečni rezi – spredaj in zadaj Nastavljivi rezkarji Ravni rezkar Rezalnik za vogale Profilni strgalo Ravno strgalo Polirni stroj Leto izdelave: 2010