Stroj za lepljenje robov Hebrock AKV 3006 DK-F 2012

Hebrock AKV 3006 DK-F

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 5.250 mm, skupna višina: 1.780 mm, skupna širina: 1.060 mm, Teža: 1.500 kg Cena: Po dogovoru - Leto izdelave: 2010 - Dokumentacija na voljo: Ne - CE označba prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 1969 - Transportne dimenzije: 5250mm x 1060mm x 1780mm (d x š x v) - Transportna teža [kg]: 1.500 kg - Transportnih paketov [kos]: 1 Ljdowp D Udjpfx Ah Aoak Finančne informacije DDV: Naveden cena ne vključuje DDV DDV / Obravnavanje razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijske panoge Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner copying, and two scrape blades. Very well-maintained machine from a small business in excellent condition. Touchscreen interface with PLC control for easy operation; up to 12 operating programs can be stored. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Soundproof enclosure Extendable workpiece support table, special equipment extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in the scope of delivery (one used for EVA glue and one for PUR glue). The PUR glue pot is practically as new, purchased for a single job only. Manual pressure beam adjustment with SIKO readout Manual infeed fence adjustment with SIKO readout Manual edge thickness adjustment with SIKO readout Jointing unit with Leitz Whispercut diamant cutters, still sharp Gluing section with automatic edge feed for rolls up to 3mm Laodpfx Ahotpn Etj Aok Pressure section with 4 rollers Cross-cut saw Integrated offcut container for edge trimmings Combination milling unit, R2, with pneumatic adjustment for thin and thick edge Corner rounding unit R2, pneumatically adjustable between thin and thick edge The form milling unit can also be used for the shelf program, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Cover interlock CE marking Operating manual A video of the machine in operation can be provided upon request. All reversible knives of the milling units and scrapers have been replaced or rotated; saw blades sharpened. The machine is thus immediately ready for use. Only the diamond joint cutters (Whispercut) have not been replaced but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor to the current K series. Machine has only approx. 730 operating hours (glue pot switched on), but the frequency inverters were only on for approx. 455 hours. Machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this provider."

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Ledpfexfh Tmex Ah Aoak Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim