Polnilna linija Hamba BK 8008 P (2002)

Hamba Abfülllinie

Stanje: rabljeno, Leto izdelave: 1997, Overview The cup filling line was built by HAMBA in 1997, remains in operation until the end of 2024, and can be inspected at any time. Technical Data Output: 20 – 40 cycles/min Products that can be packed: - Liquid drinking yogurt, 0.3 to 4% fat (20–45°C) - Stirred yogurt with fruit, max. fruit piece size 15mm, 0.3 to 4% fat (3–10°C) - Cream, 25 to 35% fat (3–42°C) - Salad dressings with salt, herbs, and vinegar - Pudding, sweet (2–70°C) Cup formats: - Cup diameter: 75 mm - Max. height: 120 mm Filling ranges: - Doser 50 ccm to 250 ccm, filling with fruit dosing - Doser 30 ccm to 150 ccm, filling with fruit dosing Closure: heat-sealed lid Control system: Siemens S7 Scope of supply - Filling machine | HAMBA | BK 8008 A | 1997 - Crate erector | Schäfer und Flottmann | SFS 337 | 1997 - Empty crate conveyor | Manex | - | 1997 - Packer | AF | - | 1997 - Integrated into SIG HAMBA BK 8008 P line - Good maintenance condition Nsdpfx Aet Uw E Dobbscl - Full crate conveyor | Manex | - | 1997 - Layer palletizer | Manex | - | 1997 (overhauled 2004)

Stanje: rabljeno, various types available Njdpfxsdc A Sbj Abbocl

Leto izdelave: 2014, Stanje: generalkompletno obnovljen (rabljeno), REEPAK REEFLOW 250 Ncjdpfx Abeg Rcabebel ID št. 2050 Stroj za pakiranje v flow-pack Reepak model Reeflow 250, letnik 2014, ki je bil prej uporabljen za pakiranje jabolk, primeren pa je za vse vrste živil in podobno. Največje dimenzije pakiranja: dolžina 600 mm x širina 250 mm x višina 100 mm. OPOMBA: STROJ JE V NOVEM STANJU! Dimenzije stroja: širina 570 cm x globina 145 cm x višina 205 cm.

Leto izdelave: 1990, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 647-230, Hamba Punching Machine for Lids (Deckelstanzmaschine) without Tooling Model 647-230 Film width: 230 mm Very good condition Made in Germany - Supplied with used embossing calender for worm-structure texture - Power supply: 220/380V – three-phase - Additional punching tools available, e.g.: Ncodpfxenr Ex To Abbel 2x double-punch tool – diameter 75.50 mm 1x double-punch tool – diameter 59.54 mm 1x double-punch tool – diameter 80.50 mm 1x double-punch tool – diameter 93.80 x 120.90 mm

Stanje: dober (rabljeno), 10,000 Pieces of Insert Grating / Wire Mesh Decks for Pallet Racking, Galvanised Finish Insert gratings are available in various dimensions, mesh widths, bar specs, and load capacities: Negotiable price: from €15.00 net per m² ex stock. Larger quantities available on request! Insert Grating Mesh Size Load Bar Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used equipment in excellent condition, see photos. Item is in stock. Transportation available on request. Inspection possible by appointment at any time. Further information available on request. Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times. (Technical specifications, information, prices, and prior sale subject to change. Please see our General Terms and Conditions. All prices are exclusive of VAT, ex works.) Purchase/Sale We are always seeking and offering a wide variety of items from various categories: - broom-clean facility liquidations - business closures Ncedpfod Hvvgox Abbjl - Fast – flexible – efficient! We also clear and/or dispose of inventory for insolvency administrators. Please contact us with key details and we will respond promptly. To visit our website, please click on our logo!

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Ncjdpfetzdyzjx Abbol Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: skoraj kot novo (rabljeno), GASTI Dogatherm 41 cup filler. Manufacturer – Gasti-Verpackungmaschinen GmbH Ncodofddpvepfx Abbol Model – Dogatherm 41 Buffer tank capacity – 100 L Filling volume (min.) – 25 ml Filling volume (max.) – 280 ml Output capacity – 4,500 to 8,000 cups per hour Suitable for filling the following products: milk, drinking cocoa, yoghurt, buttermilk, cream, sour cream, cottage cheese, pudding, fruit jelly, rice pudding, Nutella, jam, etc. Includes extra chain and a pallet with spare parts/replacement components. Additional filling head included. Diameter of extra chain for cups – 70 mm. HAD.20.

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P Ncjdpfxjvy Ihdj Abbel - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: dober (rabljeno), Redko na voljo: stroj za izdelavo vrečk Toyo Jidoki, neposredno od nedavno zaprtega proizvajalca omak, juh in koncentratov. Stroj je polnil te izdelke v stoječe, retortne vrečke. Nov kupljen leta 2007. Nedpfoqudivex Abbecl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Nodpstgpdzsfx Abbocl