Stroj za lapiranje

HAHN & KOLB ZL 800 H

Stanje: rabljeno, Leto izdelave: 1976, Table diameter mm Workpiece height mm Number of wheels: 2 Total power requirement: 11 kW Machine weight approx. 4.2 t Space requirement approx. m O F F E R We are pleased to offer you, subject to prior sale and errors excepted, ex stock without obligation: HAHN & KOLB Double-sided lapping and fine grinding machine Model ZL 800 H Year approx. 1976 240 135 _____ Possible lapping/grinding wheel diameter 755 - 810 mm Possible ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. workpiece transport wheel Ø approx. 306 mm Max. distance between cast lapping wheels 125 mm Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Lapping wheel speeds above 30 / 42 / 60 / 84 rpm Lapping wheel speeds below 30 / 42 / 60 / 84 rpm Workpiece transport wheel central drive 28 / 40 / 56 / 80 rpm Spindle drive each 6 / 8 kW Kodpfxsub Alue Af Tjdg Total drive approx. 11 kW - 380 V - 50 Hz Weight approx. 4,200 kg Special equipment and accessories: • HAHN & KOLB / LAUER measuring and control system with a sensor guided through the hollow spindle. The sensor continuously measures during operation and automatically ends the cycle once the target thickness is reached. • Pressure stages can be set via HELLER hydraulics, and grinding cycles via timer. • Currently equipped with fine grinding wheels for double-sided, high-precision fine grinding of parallel flat workpieces. • Laterally mounted, height-adjustable and swivelling motorized dressing/mechanism with electromechanical feed. • Lapping or coolant dosing device with container. • Numerous drive and pressure adjustment options such as: co-rotating/counter-rotating, single drive, dragging of one or both wheels, left/right rotation, etc. • Motorized, height-adjustable planetary drive for the transport wheels. Condition: Minor issues in the gearbox, otherwise good condition. Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice. We have other double-sided lapping and fine grinding machines in stock—please enquire.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, MCS Jigger High Temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Ksdpfefqmx Tsx Af Tjdg Completely overhauled in 2002. Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roll diameter: 324 mm Additives tank.

Stanje: rabljeno, Leto izdelave: 1974, Table diameter mm Workpiece height mm Number of wheels 2 Total power required 8 kW Machine weight approx. 4.2 t Space required approx. m O F F E R We can offer you, subject to prior sale and errors excepted, ex stock on a non-binding basis: HAHN & KOLB Double-sided lapping and fine grinding machine Model ZL 800 H Year approx. 1974 240 024 _____ Possible lapping/grinding wheel diameter 755 - 810 mm Possible ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. workpiece transport wheel Ø approx. 306 mm Max. distance between cast lapping plates 125 mm Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Kedpfxeub Alze Af Todg Lapping wheel speeds upper 30 / 42 / 60 / 84 rpm Lapping wheel speeds lower 30 / 42 / 60 / 84 rpm Workpiece transport wheel centre drive 28 / 40 / 56 / 80 rpm Each spindle drive 6 / 8 kW Total drive approx. 11 kW – 380 V – 50 Hz Weight approx. 4,200 kg Special equipment / accessories: • HAHN & KOLB / LAUER measuring and control device with sensor guided through the hollow spindle. The sensor continuously measures during the process and automatically ends the cycle when the set thickness is reached. • Pressure stage adjustment via HELLER hydraulics, and grinding phase adjustment by timer. • Currently equipped with fine grinding wheels for double-sided high-precision fine grinding of flat-parallel workpieces. • Laterally mounted, height-adjustable and swiveling motor-driven dressing unit with electromotive feed. • Lapping/sluicing agent dosing unit with container. • Wide range of drive and pressure settings such as: concurrent/counter rotation, single drive, co-rotation of one or both wheels, left/right rotation, etc. • Motor-driven height-adjustable planetary drive for the transport wheels. Condition: Not yet commissioned, special price possible for "as is" purchase. Delivery: Ex stock, immediately, FCA Metzingen. Payment: strictly net - due upon receipt of invoice. We have further double-sided lapping and fine grinding machines in stock – please enquire.

Leto izdelave: 1970, Stanje: nepreverjeno (rabljeno), Offered here is a balancing machine from Trebel. The machine features a robust steel protective hood. Offered for refurbishment, as the control cabinet is missing! Technical data: Ksdohikdwjpfx Af Todg Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Standard weight range up to 400 kg Max. permissible load per block: 200 kg

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Ksdpfx Asv Scrbsf Tsdg

Leto izdelave: 1992, Stanje: rabljeno, Plate heat exchanger for milk processing Kdsdeh Eulgspfx Af Tjg

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Kdedjt Hwupepfx Af Tog Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Stanje: novo, Leto izdelave: 2024, SINGLE-BLADE TRIMMER useful cutting length from 4.2 to 8.2 m maximum cutting thickness 160 mm parallel guide sawdust hopper Kedpefw Nv Rsfx Af Tedg

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. Kdsdpfx Aod Ev Upof Tog This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: dober (rabljeno), Leto izdelave: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further data, see data sheet Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Kdodovi Hryopfx Af Teg Good overall condition.