Stroj za lapiranje

HAHN & KOLB ZL 800 H

Stanje: rabljeno, Leto izdelave: 1976, Table diameter mm Workpiece height mm Number of wheels: 2 Total power requirement: 11 kW Machine weight approx. 4.2 t Space requirement approx. m O F F E R We are pleased to offer you, subject to prior sale and errors excepted, ex stock without obligation: HAHN & KOLB Casdpfxsub Alus Afqea Double-sided lapping and fine grinding machine Model ZL 800 H Year approx. 1976 240 135 _____ Possible lapping/grinding wheel diameter 755 - 810 mm Possible ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. workpiece transport wheel Ø approx. 306 mm Max. distance between cast lapping wheels 125 mm Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Lapping wheel speeds above 30 / 42 / 60 / 84 rpm Lapping wheel speeds below 30 / 42 / 60 / 84 rpm Workpiece transport wheel central drive 28 / 40 / 56 / 80 rpm Spindle drive each 6 / 8 kW Total drive approx. 11 kW - 380 V - 50 Hz Weight approx. 4,200 kg Special equipment and accessories: • HAHN & KOLB / LAUER measuring and control system with a sensor guided through the hollow spindle. The sensor continuously measures during operation and automatically ends the cycle once the target thickness is reached. • Pressure stages can be set via HELLER hydraulics, and grinding cycles via timer. • Currently equipped with fine grinding wheels for double-sided, high-precision fine grinding of parallel flat workpieces. • Laterally mounted, height-adjustable and swivelling motorized dressing/mechanism with electromechanical feed. • Lapping or coolant dosing device with container. • Numerous drive and pressure adjustment options such as: co-rotating/counter-rotating, single drive, dragging of one or both wheels, left/right rotation, etc. • Motorized, height-adjustable planetary drive for the transport wheels. Condition: Minor issues in the gearbox, otherwise good condition. Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice. We have other double-sided lapping and fine grinding machines in stock—please enquire.

Stanje: novo, Stroj za uravnoteženje kardanskih gredi BVI-03-74 Na voljo na zalogi na Poljskem!!! Dobavni rok: en dan!!! Stroj za uravnoteženje gredi do mase 150 kg in dolžine do 4700 mm. Primeren za manjše delavnice s širokim spektrom kardanskih gredi, vključno z gospodarskimi vozili. Ta uravnoteževalni stroj je zasnovan za visoko produktivnost in služi uravnoteženju kardanskih gredi osebnih in tovornih vozil. Zagotavlja enostavno uravnoteženje kardanske gredi zaradi številnih tehničnih rešitev, hkrati pa ima dostopno ceno, kar zmanjšuje vaše finančno breme in omogoča učinkovito rast vašega podjetja. DVA KRAT hitrejši od vaše trenutne opreme. Ta uravnoteževalni stroj omogoča kakovostno in hitro uravnoteženje gredi. Če lahko delate 2–2,5-krat hitreje, je to vaša prava konkurenčna prednost. VISOKO UČINKOVITI PRIBOR Stroj je opremljen s tremi glavnimi tipi adapterjev: 1. Hitro-vpenjalni univerzalni adapterji. Dve glavni prednosti: Zaradi posebne zasnove je prirobnica kardanske gredi vpeta v 5 sekundah – brez vijačenja. To pomeni, da lahko gred vpetje izvedete 4-krat hitreje. Druga prednost so centrirni obroči. Gred se namesti v adapterje s centrirnimi obroči, ki jih je mogoče izdelati na navadnem stružnem stroju za najpogostejše velikosti. 2. KV-prirobnični adapterji. Uporabljajo se za uravnoteženje gredi s križno-zobimi prirobnicami, na štiri dimenzije: 120, 150, 180, 205 mm. Običajno za tovorna vozila. 3. Adapter z režami. Za montažo različnih prirobnic z izvrtinami; pritrditev gredi kot pri univerzalnih adapterjih, s centrirnimi obroči. KLJUČNE LASTNOSTI • Uravnoteženje 2-, 3- in 4-nosilnih kardanskih gredi • Dolžina do 4700 mm, masa do 150 kg • Montaža kardana v 1 minuti • Standardni set adapterjev – za 80 % vseh kardanskih gredi • Trije načini pritrditve sredinskega ležaja • Stroj s prožnim ležiščem – visoka občutljivost na vibracije • Upravljanje z enim delavcem • Drsna ležišča – hitra menjava, udobno delo • Varnostni nosilec s hitro vpenjalno sponko • Merjenje v vseh ravninah hkrati • Umerjanje stroja s strani upravljavca • Prikaz neravnotežja v realnem času • Izdelava in tiskanje poročil TEHNIČNE SPECIFIKACIJE Največja masa kardanske gredi: 150 kg Največji premer prirobnice: 300 mm Največja dolžina kardanske gredi: 4700 mm Število nosilcev stroja: 4 Število hkrati merjenih ravnin: 2, 3, 4 Minimalno dosegljiva preostala specifična neuravnoteženost: 10 g mm/kg Obratovalno območje hitrosti rotorja: 1000–2000 vrt/min Napajanje: 380V, 3-fazno, 50 Hz Minimalna moč: 2,2 kW Dimenzije (d/š/v): 6000 х 1100 х 1450 mm Teža: 700 kg Caedjpbv Tfepfx Afqoa Izdelujemo celoten nabor opreme za uravnoteženje in servis kardanskih gredi. Za najboljšo ponudbo nas kontaktirajte!

Stanje: rabljeno, Leto izdelave: 1975, Table diameter mm Workpiece height mm Number of wheels 2 Total connected load 11 kW Machine weight approx. 4.2 t Required space approx. m O F F E R We can offer you, ex stock and subject to prior sale and error, without obligation: HAHN & KOLB double-sided lapping and fine grinding machine Type ZL 800 H Year of manufacture approx. 1975 240 049 _____ Possible lapping/grinding wheel Ø 755 - 810 mm Possible wheel ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. transportation carrier wheel Ø approx. 306 mm Max. distance between cast lapping wheels 125 mm Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Lapping wheel speed upper 30 / 42 / 60 / 84 rpm Lapping wheel speed lower 30 / 42 / 60 / 84 rpm Workpiece carrier wheel central drive 28 / 40 / 56 / 80 rpm Spindle drive each 6 / 8 kW Total drive approx. 11 kW - 380 V - 50 Hz Weight approx. 4,200 kg Casdpfsub Al Iex Afqea Special equipment / accessories: • HAHN & KOLB / LAUER measuring and control device with sensor routed through the hollow spindle. The sensor continuously measures during operation and automatically ends the cycle when the target thickness is reached. • Pressure stage adjustment via HELLER hydraulics and grinding phase adjustment via timer possible. • Currently fitted with fine grinding wheels for double-sided high-precision fine grinding of flat-parallel workpieces. • Side-mounted, height-adjustable and swiveling motorized dressing device with electric feed. • Lapping or rinsing agent dosing device with container • Multiple drive and pressure setting options such as: co-rotating / counter-rotating, individual drive, dragging one or both wheels, left/right rotation, etc. • Electrically height-adjustable planetary drive device for the carrier wheels Condition : mild noises in lower gearbox, otherwise in good condition Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – payable upon receipt of invoice We have further double-sided lapping and fine grinding machines in stock, please contact us.

Stanje: dober (rabljeno), premer struženja: 5.000 mm, pomik po osi Z: 2.000 mm, stružna dolžina: 2.500 mm, The machine is in good technical condition, fully functional, and was modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm, and a chuck diameter of 2500 mm. It can accommodate workpieces weighing up to 40 tons with a height of 2000 mm. Cajdjv Dkykepfx Afqoa

Stanje: rabljeno, Leto izdelave: 1968, Faceplate diameter 1000 mm Swing over support 1200 mm Centre distance 1500 mm Bed recess . Machine weight approx. 6 t Caedpfxewhqzzs Afqja

Leto izdelave: 1970, Stanje: nepreverjeno (rabljeno), Offered here is a balancing machine from Trebel. The machine features a robust steel protective hood. Offered for refurbishment, as the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Standard weight range up to 400 kg Caodpfx Afohikdwoqja Max. permissible load per block: 200 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Csdpfx Aeh Invrjfqoaa Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: dober (rabljeno), Leto izdelave: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further data, see data sheet Machine documentation available. Caodpjvi Hryjfx Afqsa Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Stanje: rabljeno, Leto izdelave: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Cedpfx Afot Hwupsqjaa Spindle speeds, steplessly adjustable: approx. 85–300 rpm, 170–600 rpm Stroke speed, steplessly hydraulically adjustable: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment: - Mounted 2-station swivelling table for accepting 2 workpieces, with mechanical workpiece clamping via hand lever - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock – please contact us for more information.

Leto izdelave: 1992, Stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off Codpfx Afot Hw Naoqsaa • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.