Dele Gutmann AGS SWL501

Gutmann

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A Gutmann blasting machine, completely overhauled by Rösler in 2019, is available. Documentation is included. An on-site inspection is possible. Ljdpfx Alswftcpe Rort

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Ledpfx Alot Hwt Sj Rjrt Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Leto izdelave: 1972, stanje: pripravljen za uporabo (rabljen), Razdalja med vretenom in mizo min./maks.: 81mm/481mm, razdalja med sredinama vretena in nasprotnega držala: 195mm, rotacija vretenaste glave: 360°, premer rezkalnega vretena: 70mm, nastavitev vretena: 100mm, nastavitev vretenastega ležišča: 300mm, dimenzije mize X/Y: 480mm/820mm, hod X/Y/Z: 500mm/200mm/400mm, maks. dolžina obdelovanca: 400mm, hitrost vretena: 1600 vrt/min, pomik X/Y: 500mm/min, pomik Z: 250mm/min, vrtljivost vretenaste glave: +/-30°, mere stroja X/Y/Z: ca. 1600mm/2550mm/1700mm, teža: ca. 2300kg. Stroj je bil konec leta 2025 električno pregledan in ugotovljena je bila okvara stikala za sili. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Lrodpfx Alsx S Rcme Rot

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Lrodpov Rwu Uefx Al Ret Permitted for manual loading according to CE standard. Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), two-hand operation.

Stanje: rabljeno, Technical details: X-axis travel: 600 mm Y-axis travel: 300 mm Z-axis travel: 360 mm Speed range, max horizontal: 40–2000 rpm Spindle taper (vertical/horizontal): SK 40/SK 40 Ledpfou U E T Isx Al Rjrt Speed range (max permissible): 40–2000 rpm Feed rate: 2–3600 mm/min Quill travel: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. (LxWxH): 1.8 x 1.35 x 1.95 m Milling machine with shaping head Stroke length: 32–80 mm, with 10 double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Stanje: rabljeno, Leto izdelave: 1976, Funkcionalnost: nepreverjeno, skupna dolžina: 4.100 mm, skupna širina: 1.900 mm, skupna višina: 1.900 mm, širina postelje: 550 mm, največja hitrost vrtenja: 1.800 obr/min, Na prodaju je Boehringer DM550 tokarski stroj s vodilnim/vlečnim vretenom iz leta 1976 (18,5 kW). DM 550 omogoča premer vrtenja približno 550 mm (preko ležišča) in ponuja visoko stabilnost za zahtevna in natančna stružna opravila. Stroj je v stanju, primernem za svojo starost, ni bil testiran in se prodaja v trenutnem stanju. Ledpfexyxu Dsx Al Rert

Leto izdelave: 1981, stanje: rabljeno, Manufacturer: Deckel Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal travel (X-axis): 700 mm Cross travel (Y-axis): 400 mm Vertical travel (Z-axis): 450 mm Spindle overhang: 50–450 mm Spindle taper: ISO 40 Number of spindle speeds: 18 Lrjdpfx Aoihp U Djl Rst Spindle speed range: 31.5–1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5–1600 rpm Machine weight: 2000 kg Feed rates X/Y/Z axes: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table size: 1000 x 470 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obremenitev mize: 200 kg, dolžina mize: 650 mm, skupna masa: 240 kg, višina mize: 400 mm, Horizontalna nosilnost: 200 kg Vertikalna nosilnost: 100 kg Navor: 407 Nm Zračnost: 0,025 mm Prenosno razmerje: 72:1 Delično razmerje: 2:1 Vključno z luneto MK 4 Vključno s pogonom Vključno s kablom Premer mize: Ø 315 mm Nosilnost mize: 200 kg Rotacija B-os: 0,001° Hitrost vrtenja B-osi: 4500 obr/min Lsdpfsyu Nb Eex Al Rort Dolžina: 650 mm Širina: 250 mm Višina: 400 mm Teža: 240 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 5 obr/min, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 2.000 mm, dolžina podajanja os Z: 700 mm, hitrost pomika os X: 1.000 m/min, hitrost podajanja osi Y: 1.000 m/min, hitrost podajanja os Z: 1.000 m/min, skupna širina: 4.000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace manufacturing operation. Ledpfxjx Rhlcj Al Rort CNC control system: Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suitable for high-precision multi-axis machining in continuous operation. The machine was overhauled in 2024 and received brand new telescopic covers on all axes, as well as numerous additional minor but essential refurbishments to the hydraulics, CNC control, hoses, and all types of seals. The machine is comprehensively equipped with coolant system, etc. Travel distances: X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle data: Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Spindle axial stroke: 700 mm Feeds and rapid traverses: Automatic feed, spindle and vertical axis: 2 × 1,000 mm/min Rapid traverse, spindle and vertical axis: 5,500 mm/min Clearances: Min. spindle height above table: 0 mm Max. spindle height above table: 1,500 mm Maximal distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gear stages: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table data: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table feeds: Automatic feeds X and Y: 1,000 mm/min each Rapid traverse X and Y: 5,500 mm/min each Table rotation: Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting & transport data: Group 1: Steel bar, diameter 70 mm, length 1,600 mm Steel bar, diameter 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel cables, diameter 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, minimum diameter 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.

Leto izdelave: 2000, stanje: dober (rabljeno), Used drum shot blasting machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year: 2000 Serial number: 10371/00 Continuous belt shot blasting machine for sandblasting/blasting of aluminum die castings, brass or steel forgings, and fasteners/bolts. Automatic feed tower. Maximum unit weight per piece: 8 kg Turbines: 2 x 11 kW Turbine diameter: 350 mm Lrsdpfemza S Esx Al Rst Turbines with inverter Special two-position valves Filter CURRENT CONDITION: Dismantled and stored at our facility.