Oblikovanje in rezkanje

GUBISCH Centromat 180

Stanje: novo, moč: 18 kW (24,47 KM), vrsta prenosa: mehanski, vrsta goriva: dizel, barva: modra, skupna masa: 1.810 kg, skupna dolžina: 2.895 mm, lastna masa: 1.300 kg, največja dovoljena obremenitev: 510 kg, vzmetenje: drugo, število sedežev: 1, Oprema: pogon na vsa štiri kolesa, zapora diferenciala, Servolenkung, dieselni motor, pogon na sve točkove, 18,2 kW, 1.319 cm³, hidrostatski pogon, 3 cilindra, maksimalna brzina 20 km/h, blokada diferencijala, servo upravljač, jedno sedište, analogni pokazivač nivoa goriva, radno svetlo nazad, zakretno, 2 prednja tegova, po 15 kg, zaštitni ram sa rotacionim svetlom, dijagonalne gume napred: 6.0-12, pozadi: 8.30-20, ukupna dužina 2.895 mm, težina 1.300 kg, dozvoljena ukupna masa 1.810 kg. Travnate gume dostupne uz doplatu od 500,00 € neto. ZA NAS SU STANJE I INTUICIJA PRESUDNI, CENA JE NA DRUGOM MESTU. Za dodatna pitanja obratite se gospodinu Falleru na broj telefona. //*ZAMENA, OTKUP ILI ZALOŽENJE VAŠEG VOZILA, KAO I FINANSIRANJE SU MOGUĆI! Sve informacije bez garancije*. Dodatne ponude možete pronaći na našem sajtu. Opisi i navedeni podaci ne predstavljaju obavezujuće izjave i nisu pravno obavezujući. Obavezujući je kupoprodajni ugovor koji se sklapa u auto salonu pri kupovini vozila. Zadržavamo pravo na greške i međuvremenu prodaju! Klsdpswtpvzofx Af Nsl

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications Kledpfx Afou Su Huo Nol ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available (technical data according to manufacturer – subject to prior sale and not guaranteed!)

Leto izdelave: 2003, Stanje: rabljeno, Bollegraf Hammermühle AS 75/850 Leto izdelave: 2003 Moč: Primernost: Prečni prerez dovoda: Rotor- Klodpfxog T Id Ne Af Nol Širina rotorja: 850 mm Cena: 24.500 evrov Kontaktna oseba: g. Rainer Eckerle

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) Kljdpfxsw Dp Ufe Af Nsl - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno), Saw blade diameter: 350 Kodpfx Afeff Snbj Noll

Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder Working width: 20 - 230 mm (up to 260 mm) Working height: 8 - 120 mm (up to 140 mm) 5 working spindles, 40 mm spindle diameter Long infeed table (approx. 2000 mm) Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW Pneumatic pressure feed rollers Continuous cardan feed: 5 - 24 m/min, stepless adjustment Feed roller before jointer Kjdpfx Afowqda No Njll Push-button control panel Automatic lubricant pump Mechanical digital readouts CE-certified machine Year of manufacture: 2001 Supplied without tooling Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration at the exhibition center Available from stock in Lieboch

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Kjdpjvupm Defx Af Njll Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Klodporigxyofx Af Njl Machine tested, in original condition

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Klodpfx Aforyb D So Nol Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 690924, Connected load 380V 1.84 kW Klsdpfx Afjh U Dame Njl Speed 2840 rpm Number of spindles: 21 pcs, 32 mm pitch Spindle distance 640 mm Spindle rotation direction: 11 right-hand, 10 left-hand, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact information.