Oblikovalnik

Gubisch BS170/3

Stanje: novo,

Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder Working width: 20 - 230 mm (up to 260 mm) Working height: 8 - 120 mm (up to 140 mm) 5 working spindles, 40 mm spindle diameter Long infeed table (approx. 2000 mm) Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW Nodpowqda Nsfx Abbjkt Pneumatic pressure feed rollers Continuous cardan feed: 5 - 24 m/min, stepless adjustment Feed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts CE-certified machine Year of manufacture: 2001 Supplied without tooling Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration at the exhibition center Available from stock in Lieboch

Leto izdelave: 1980, Stanje: dober (rabljeno), Gubisch Planer and Moulder 172/7 S/N 3425 80 Year of manufacture: 1980 Length of jointer table: 1,950 mm Maximum planing width: 170 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 7 planing spindles: 1. Bottom jointer spindle: 7.5 kW 2. Right edge trimming spindle: 3.0 kW 3. Left spindle: 4.0 kW 4. Right spindle: 4.0 kW 5. Top thicknessing spindle: 4.0 kW 6. Top thicknessing spindle: 5.5 kW 6. Universal spindle top/bottom: 3.0 kW Voltage: 380 V, 50 Hz Total power consumption: 33.6 kW Feed motor: 1.5 kW Feed speed adjustable: 5 – 30 m/min Nkodpfxegrmymo Abbot Weight: 3,300 kg Dimensions (L x W x H): 4,800 mm x 1,400 mm x 1,850 mm Technical information subject to change.

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial Nkedpfx Abowgwmnebot - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 71257/1, - Manufacturer: Cefla/Sorbini - Model: Ecolight - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 870 +/- 20 mm - Max. workpiece height: approx. 70 mm - Number of tubes from above: 1 pc. - Tube alignment: straight, 1 pc. - Suitable for mercury lamps - Suitable for gallium lamps - Conveyor type: roller conveyor - Roller pitch: approx. 95 mm - Feed speed adjustable: 5 - 25 m/min - Machine length: 1,500 mm + 500 mm - Voltage, frequency: 400 V / 50 Hz - Total electrical connected load: 12.56 kW - Voltage fluctuations max. +/- 5% Nsdpfx Ajumvp Esbbskt

Stanje: rabljeno, Number of spindles: 5 units Working width: 20 - 230 mm Planing height: 8 - 120 mm Surface table length: 2000 mm Feed motor: 1.1 kW Feed speed, steplessly adjustable: 2 - 12 m/min. 1 WEINIG Planing and Moulding Machine VARIOMAT including multifunction/slotting table ----- Machine will be cleaned and function-tested prior to delivery Nksdpfx Ajwugpbsbbst Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal bottom ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 - 145 mm Axial adjustment: 5 mm Rebate device incl. rebate cutter MarathonCoating for table inserts before and after 1st bottom spindle 2nd spindle vertical right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter: 40 mm Electronically adjustable speed: 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting circle for longitudinal processing: 93-232 mm Minimum tool diameter at stop level: 93 mm Maximum tool diameter behind stop level: 180 mm Maximum profile depth: 45 mm Axial adjustment: 30 mm Insert segment, incl. additional stop lip 125 mm Insert segment, incl. additional stop lip 150 mm 3rd spindle vertical left POWERLOCK/HSK ----- Common motor with 1st right spindle PowerLock tool holder Common speed with right vertical spindle Tool cutting circle for longitudinal processing: 93-232 mm Maximum profile depth: 45 mm Minimum profile depth with tool cutting circle 200 mm: 20 mm Axial adjustment under table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal top ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125-200 mm Maximum profile depth: 30 mm Minimum profile depth with tool cutting circle 200 mm: 20 mm Axial adjustment: 30 mm Glazing bead discharge after top spindle 5th spindle second horizontal bottom ----- Motor with brake: 4 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125-200 mm Maximum profile depth: 15 mm Axial adjustment: 10 mm Machine operation ----- Both axes of all spindles - except for the 1st bottom spindle - are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital display for the feed, together with the pressure unit in front of the top spindle. Pressure unit after the top spindle can be adjusted separately. Memory function ----- For storing profile setting values Tool holder axes and pressure elements before and after the top tool holder with electronic dual displays: Function: - Store the setting values of the produced profile with the push of a button under a profile number - When the profile number is recalled, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are matched accordingly - 99 memory slots 3-axis CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles No. 2, 3, 4 3 radial CNC-controlled adjustment and posit...

Stanje: dober (rabljeno), Leto izdelave: 1982, WEINIG Four-Side Planer, PM 17, 5 Spindles Machine No.: 1329-2356 Year of Manufacture: 1982 Nsdpfoicbhvsx Abbekt Working width: 170 mm Planing height: 120 mm 5 spindles: max. tool length: 180 mm, 130 mm Infeed table length: 2000 mm with planer heads 6 spindle configuration: 1st Bottom: 4 kW 2nd Right: 3 kW 3rd Left: 5.5 kW 4th Top: 5.5 kW 5th Bottom / Universal: 4 kW Spindle diameter: approx. 35 mm Feed speed: 6.5 - 49 m/min Manual lubrication pump Includes 5 tools for all heads Dimensions: 4500 mm x 1300 mm x H 1500 mm Weight: approx. 3,800 kg Technical data subject to correction.

Stanje: skoraj kot novo (rabljeno), Maximum planing width: 220 mm Maximum planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 4 Nodetqwkxopfx Abbjkt Spindle arrangement: bottom 4 kW right 3 kW left 3 kW top 4 kW Lubrication pump for the worktable Electric lifting of machine body Power supply: 400 V

Stanje: rabljeno, for installation on an existing bar conveyor. Scope of delivery: Tube housing with exhaust fan and control cabinet. Without transport - Manufacturer: Cefla - Model: ECO LIGHT - Working width: 1,300 mm - Number of tubes from above: 1 piece Nkedpjvun Uysfx Abbst - Tubes positioned straight - Suitable for mercury tubes - Suitable for gallium tubes - Reflector, swivelling - Total connected load: 14.61 kW - Location: in stock - Voltage/Hz: 400 / 50

Stanje: skoraj kot novo (rabljeno), working width 230 mm working height 120 mm 5 heads head arrangement: bottom 5.5 kW right 5.5 kW left 5.5 kW top 7.5 kW bottom 5.5 kW Nkjdpswlk Ebofx Abbst head speed 6,000 rpm 2-axis head adjustment stepless feed speed adjustment year of manufacture: 2001 power supply: 400 V