Linija za spajanje

GRECON

Stanje: zelo dobro (rabljeno), Kompletna linija za piljenje s ulaznom trakom, ARI SKR 600 reduktorom, ARI KS 122 pilom, ARI BKR 600 drugim reduktorom, ARI DS 70 višelisnom pilom i ARI KT 52 linijom za obrezivanje s potpunim skenerom. Pjdpfx Agjikvl Roperd Puni donji pod za rukovanje otpadom. Svi električni ormari i hidraulika uključeni.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Prodpfxolu D Tfo Agpsd Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm Psdpfx Ajrigxyjgpord 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Prodpfx Aog D Ugkegpjd Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Pedsrb An Uepfx Agpord Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Stanje: dober (rabljeno), Leto izdelave: 1973, Weinig Planing Machine 4-sider / U250 / Unimat 250 Planing width: 250 mm Planing height: 120 mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Podpjrigq Sefx Agpjrd Top spindle 7.5 kW Bottom spindle 7.5 kW Saw unit spindle 7.5 kW Includes planing heads Includes milling tools Includes knives Includes all accessories Good condition - immediately available Location: Austria, near Sankt Pölten

Stanje: rabljeno, Leto izdelave: 1994, AUTOMATIC 5-SPINDLE MOULDER WEINIG MOD. PROFIMAT 23 – USED Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle Podsrm Rxwjpfx Agpsrd - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, HYDRAULIC CLAMP FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is used for edge gluing wooden cut elements under high pressure from hydraulic cylinders. The clamping force per cylinder ranges from 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is performed in a stack within the loading area dimensions. Stack formation is achieved by hydraulic pressing between movable vertical beams and the vertical slats of the cross cylinders. Both elements of the stack forming system are equipped with wooden or metal inserts matching the stack profile of the slats. Edge gluing wooden elements improves frame quality, reduces machining costs, and minimizes wood waste. Technical and operational data (standard HSKG model – 6m) Number of loading bays pcs 4 Dimensions of a single loading bay - Loading height mm 1140 - Slat length in each bay mm 1530 Maximum slat width mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of cylinders per bay: Pjdotrl R Aopfx Agpord - Ø 50x100 – 3 pcs. - Ø 80x100 – 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Machine weight kg 4800 On request, we also manufacture custom control configurations for the pressing cylinders according to the anticipated length of the glued elements, as well as different bay lengths and quantities per press set, and a maximum working width up to 220 mm with increased pressing force.

Stanje: potreben popravila (rabljeno), PRIMULTINI 1400 κεφαλή πριονόκορμου και τρόλεϊ Prodpfxjqc Ugdo Agpjd

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Fully automatic finger jointing line: Type Doppel-Pack Machine is disassembled Machine will be inspected with operational guarantee Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood outfeed length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint type: vertical and horizontal Adhesive type: PVAC white glue, double-sided glue application Electrical supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz System fully wired up to the control cabinet. Finger length / possible wood cross-section and glue type can be customised. Performance: 6 milling tables / min Working height: 960 mm Table width: 600 mm Glue application: double-sided With endless package feed Technical parameters: Input material: Input length of parts (min. - max.): 150 - 1000 mm Part width (min. - max.): 40 - 155 mm Pedjncd Utjpfx Agpord Part thickness (min. - max.): 20 - 80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided (on both sides of the part)