Linija z lepljenjem s prstnim spojem

GOMA Finger Joint

Stanje: novo, Naprava za pritrditev steklenih letvic "2 P Jumbo automatic E.C." - nova - Vaše prednosti: - Kotni spoje je mogoče zapreti - Ni odprtih razpok na steklenih letvicah - Med lakiranjem ni barvnih razlik - Okvire steklenih letvic je enostavno razporediti Stroj za kotne spoje s sponkami 2P Jumbo Automatic E.C. za pritrditev okvirjev steklenih letvic s sponkami. Možnost izbire med avtomatskim in ročnim načinom delovanja; Z nastavljivim kotom, pritrdilno napravo od zgoraj in spredaj Pritisk je mogoče ločeno nastaviti. Možnost uporabe vzporednih in prekritih sponk s pomočjo elektronske programirljive krmilne enote. Napravo za sponke je mogoče namestiti na primerno delovno mizo, upravljanje s pomočjo nožnega pedala. ----- Cena za to izvedbo na zahtevo! Dodatno se zaračunava zakonski davek na dodano vrednost ter embalaža/stroški pošiljanja. ----- Slike prikazujejo stroj za kotne spoje s sponkami 2P z možnostjo nastavljive delovne mize (glejte podrobnosti v razdelku "Dodatna cena"). Dodatne cene: ----- Nastavljiva delovna miza višinsko nastavljiva od 700 do 1000 mm, 2 podstavka, ki ju je mogoče vstaviti dolžina 1000 mm, 2 podstavka, ki ju je mogoče vrteti in premikati dolžina 1000 mm, podstavki oblazinjeni s filcem, 4 kolesa, od tega 2 s zavoro. Gedpfx Adjvnh T Njkeka ----- Dodatna cena: 1.311,00 EUR neto Sponke: paketi 15 mm sponke (paket s 2000 kosi): cena 22,00 EUR 12 mm sponke (paket s 3000 kosi): cena 32,00 EUR 10 mm sponke (paket s 3000 kosi): cena 32,00 EUR Dimenzije in teže ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Delovna miza 32 kg Vse cene so neto. Dodaten davek na dodano vrednost se obračunava posebej. Dobava iz tovarne, dodatno se zaračunavajo embalaža in stroški pošiljanja. (tehnični podatki po podatkih proizvajalca – brez jamstva!)

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Gedpfxjg D Ugkj Adkoka Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: rabljeno, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm, Width: approx. 80 – 240 mm, Finger joint length: 400 – 1,500 mm, Finished length: 2.50 m – 13.50 m stepless. Consisting of the following components: - SMB vacuum destacking unit (longitudinal) with 2 lift tables and 2 package roller conveyors, year 2013, max. package dimensions 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system; singling and feeding onto roller conveyor for scanner, board turner, diverter for too wet/too dry, diverter for B-quality, marking station or automatic mode - Bidac end-grain scanner for detecting cupping, year 2013 - Brookhuis moisture measurement FMI 5, year 2019 - Microtec scanner Goldeneye 502, year 2012, with X-ray, 4 colour cameras, and new optimization software - Dimter Opticut 350-2, year 2003 with paddle ejector (retrofit 2009) and associated sorting belts, pneumatic ejector for 2 additional qualities - NKT packaging unit - NKT finger jointing system with rotary table Special Pack AH 1050, year 2005, consisting of: milling machine, tilt station, feed track length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, 2.50 – 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 manual stacking blades, infinitely adjustable stop electro/hydraulic, package width max. 1200 mm, package height max. 600 mm, hydraulic package pusher Gjdpfovvi Tyox Adkjka Location: at customer site

Stanje: potreben popravila (rabljeno), Funkcionalnost: nepreverjeno, Čelilna spajkalna linija za lesene pakete dimter HK 400 čelilna spajkalna linija Vhodne dolžine: 800–6.000 mm Višina rezkanja: 285 mm, opcijsko 300 mm Barva: modra Gsdevi Hw Nspfx Adkjka Sestavljena iz: Poz. 01 Paketiranje Poz. 02 Valjčni transporter za pakete Poz. 03 Centralni rezkar Poz. 04 Valjčni transporter za pakete Poz. 05 Posamezno ločevanje paketov Poz. 06 Verižni prečni transporter Poz. 07 Oskrbujevalni valjčni transporter Poz. 08 Ciklična stiskalnica Poz. 09 Potisna enota Poz. 10 Krožna žaga za obrezovanje Vključno z električnimi omarami in upravljalnimi pulti Linija potrebuje popravilo in se prodaja v trenutnem stanju. Že je demontirana in skladiščena v kraju Achern. Na voljo je vsa tehnična dokumentacija. Za vprašanja o liniji in tehnično svetovanje smo vam vedno na voljo. Pri popravilu in montaži vas bomo strokovno podprli.

Stanje: novo, Main machine features: Gjdpfx Adegpg E Sskjka The TH 630 thickness planer is a simple, robust design intended for daily workshop use, featuring a planing shaft width of 630 mm. It is equipped with a large, heavy-duty, ribbed cast iron table, which effectively eliminates any vibrations during operation. The machine boasts an exceptionally powerful motor driving the cutterhead (fitted with serrated knives), making the process of planing even the most difficult wooden elements a straightforward task. Each knife can be easily replaced if worn or damaged. Table height adjustment is automatic after entering the required dimensions. These advantages enable highly precise cutting and machining settings. Advantages: - Working table mounted on 4 screws - Controller for automatic table height adjustment - 120 mm cutterhead with 4 knives - Capable of handling large workpieces Technical specifications: - Max planing width: 630 mm - Max planing height: 300 mm - Min length of workpiece: 280 mm - Cutterhead diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630x30x3 mm - Power supply: 400 V - Total power: 7.5 kW - Variable feed speed: 4–20 mm/min - Electric table lifting - Extraction port diameter: 150 mm - Weight: 890 kg - Table dimensions: 1050x630 mm - Cutter block speed: 5,500 rpm Machine available immediately from stock! Machine dimensions: - Length: 1,060 mm - Width: 1,060 mm - Height: 1,160 mm

Stanje: rabljeno, Leto izdelave: 2005, moč: 7,5 kW (10,20 KM), največja višina reza: 170 mm, največja širina rezanja: 1.100 mm, premer žaginega lista: 500 mm, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: hidravlični, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 5.500 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna masa: 1.500 kg, Oprema: CE označba, No. 04528 Sliding Table Panel Saw Martin T 73 BASIC Gjdpsyymtdjfx Adkoka Used, Year of Manufacture: 2005 Sliding table: 3000 mm Maximum cutting height: 170 mm Maximum saw blade diameter: 500 mm Saw blade bore: 30 mm Cutting width: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Hydraulic saw blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle settings Length stop extendable up to 3300 mm Sliding table with infinitely variable locking Integrated contact for extraction system activation Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (LxWxH) Weight approx. 1500 kg To avoid possible misunderstandings, on-site inspection after prior arrangement is possible and recommended. Sale in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: 'sold as seen.' Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock.

Stanje: rabljeno, Leto izdelave: 1996, Barva: Zelena Lastna teža: 4.500 kg Dimenzije (D x Š x V): 475 x 180 x 200 cm Cena: Na zahtevo Dvostranska reškalna glava REX HOMS 630 Serijska številka 16831 380 V, 102,6 A, 67,5 KM Opremljen s 3 reškalnimi valji: 1. pod 15 kW Gjdpfxewng Ikj Adkoka 2. pod 11 kW 3. nad 18,5 kW Maksimalna širina reškaljenja: 630 mm Minimalna – maksimalna višina reškaljenja: 10–310 mm Maksimalna odstranitev materiala zgornji reškalni valj: 15 mm Maksimalna odstranitev materiala spodnji reškalni valj: 10 mm - Letnik izdelave: 1996 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Maksimalna delovna širina: 630 - Maksimalna delovna višina: 300 - Tip rezila: Standardno - Število rezil na reškalni valj: 4 - Število cilindrov za nastavitev višine: 4 - Način nastavitve višine: Ročno - Minimalna hitrost podajanja [m/min]: 5 - Maksimalna hitrost podajanja [m/min]: 22 - Napetost [V]: 400 - Poraba električnega toka [A]: 103 - Moč [kW]: 67,5 - Transportne dimenzije: 4750 mm x 1800 mm x 2000 mm (D x Š x V) - Transportna teža [kg]: 4500 kg - Število transportnih paketov: 2 Finančne informacije Davek na dodano vrednost (DDV): Navedena cena je brez DDV DDV/Razlika obdavčitve: Podjetniki lahko odbijejo DDV Dostava in odkup so možni kadar koli za vse izdelke iz industrijskega sektorja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: nefunkcionalno, Platon paletni viličar Gedpspy H E Dsfx Adkeka 7 metrov transportnega dosega

Leto izdelave: 2026, stanje: novo, TNDG ročni pozicioner z ročnim kolesom in pnevmatsko zaponko. Merilni prikaz prek linearnega dajalnika in digitalnega prikaza. Na voljo v dolžinah 3, 4, 6 in 8 metrov Delovna višina: 800-1050 mm Dovoljena obremenitev: 70 kg/m Mere valjev: 40x300 mm EMBALAŽA IN MERE: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) Gedpfepa Nzysx Adkeka TNDG-6: 6500 x 670 x 430 mm (130 kg) Veselimo se vašega sporočila! Plantec Maschinen GmbH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: Gkedpfx Adox Sxfvjksa - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.