Stroj za ščetkanje

Gmatick Roba Profi Clean

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm Itodpfxjh Nvyzs Ah Uon -Weight: 962 kg

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. Iedpfjiidm Nox Ah Ustn The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 1994, AUTOMATIC 5-SPINDLE MOULDER WEINIG MOD. PROFIMAT 23 – USED Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Ijdpfx Ahorm Rxws Ustn Working width: 230 mm Year: 1994 Voltage: 380/50

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Itodpodmi Niofx Ah Ujn Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Stanje: rabljeno, Adhesive application Glue application Adhesive application - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Ijdpfjcht Nyox Ah Ustn Dimter spare parts Dimter accessories

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Iodpsg D Ugkefx Ah Ustn Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Iedjdy Hm Djpfx Ah Uetn Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: dober (rabljeno), Leto izdelave: 1973, Weinig Planing Machine 4-sider / U250 / Unimat 250 Planing width: 250 mm Planing height: 120 mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Top spindle 7.5 kW Bottom spindle 7.5 kW Iodpfx Ajrigq Seh Uotn Saw unit spindle 7.5 kW Includes planing heads Includes milling tools Includes knives Includes all accessories Good condition - immediately available Location: Austria, near Sankt Pölten

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), I am selling window sets suitable for CNC window production centers: Itsdpfog Tumyjx Ah Usn LEUT wood-aluminum 110mm Hole 50mm. Complete set. Very good condition. Available as a set. Can also be purchased separately.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR Isdsgf Sw Nspfx Ah Ujtn - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm