Panožaga

GIS GIS SA150 Vakuumheber

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Pgodpfslat Hdjx Agxsk Machine in very good condition

Leto izdelave: 2014, stanje: rabljeno, PROLOGIC window construction software Pgsdpfxorci S Sj Agxsk FenOffice 14 Conturex

Stanje: novo, Leto izdelave: 2026, Extraction capacity approx. 8,900 m³/h Motor power 7.5 kW Speed 3,000 rpm Rated voltage 400 V, 50 Hz Exhaust pipe 300/200 mm Extraction speed 28 m/sec Number of filters 45 Filter category G Filter material Polyester Noise level 80 dB without connection / 65 dB when connected to the machine via a duct Filter surface area 22 m² Dimensions 920 x 2,260 x 2,250 mm Weight 450 kg Vacuum 3,000 Pa 3-micron polyester filters 2 collection bins Chassis Filter cleaning via vibration system with control unit + €850 for the model with fire suppression system (Safe System) + €550 for the inverter model (variable speed drive) Pedpfx Aov Dvbaegxegk

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with clamping–cutting–saw frame lifting to preset height after completion of the cut. Infinitely variable hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimum conditions for any sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts. The machine control system complies with CE standard 89/289. Technical Data: Cutting range in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid approach of the saw frame to the material edge via pushbutton Manual miter adjustment from 45°–90°–30°, infinitely variable on scale The miter pivot point is the intersection of the saw band and fixed jaw, so there is no change in length measurement when the angle changes Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Central machine operation Saw band drive with automatic end-stop Movable band guiding arm, adjustable to material width Saw band idler wheels with carbide guides Chip removal brush, rotating with the band Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant length: 60mm Cutting speed: AC frequency controlled drive, adjustable from 15-150 m/min steplessly at the control panel Drive motors: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Pgsdpfxjt D Azcs Agxek Dimensions (LxWxH): 1450x2350x1350mm

Leto izdelave: 2006, stanje: dober (rabljeno), Gluing Machine FIN SC2R/1300 with 2 rollers Model: SC2R-1300 Year of manufacture: 2006 Manufacturer: FIN s.r.l., Italy Main technical specifications: - Working width: 1300 mm - Maximum clearance between rollers: 120 mm - Roller diameter: 185 mm Pjdpfjfguntsx Agxsgk - Feed speed: 19 m/min - Net weight: 390 kg - Overall dimensions: 64 x 210 x 136 cm - Overall dimensions with casing: 73 x 200 x 153 cm - 400 V, 50 Hz, 0.37 kW Ensures precise and uniform application with any type of adhesive and outstanding technical characteristics. Its high practical utility, functionality, and operator safety place it among the top two-roller gluing machines. The application roller is coated with acid-resistant rubber, ground and grooved, designed for heavy-duty use. Featuring a rationally constructed rubber layer, it allows for 6-7 regrindings. The rollers are easy and fast to disassemble. Distribution is accurate and uniform on one or both sides of the panels. Special shock absorbers on the roller supports enable automatic roller opening, allowing the processing of panels with different thicknesses within a 5 mm range. They also compensate for any panel parallelism deviations. Even adhesive dosing is ensured by a rectified distribution tank made of sheet metal, allowing for very quick removal for cleaning. The drip tray for glue and wash water is made of galvanized sheet steel and can be pulled out for easy cleaning. Protective covers made of sheet metal are installed on the rollers and adhesive distribution tank. The protective cover prevents any object thicker than 5 mm over the preset clearance from being inserted between the rollers, ensuring maximum operator safety. The electrical installation is housed in a waterproof enclosure, equipped with fuses and thermal protection for the motor and transformer. Control panel with start button, stop button, and warning light (24 V). Roller rotation chain with a self-adjusting tensioning sprocket. Roller washing system with a perforated wash tube for water supply during cleaning operations.

Leto izdelave: 2026, stanje: novo, TNDG ročni pozicioner z ročnim kolesom in pnevmatsko zaponko. Merilni prikaz prek linearnega dajalnika in digitalnega prikaza. Na voljo v dolžinah 3, 4, 6 in 8 metrov Delovna višina: 800-1050 mm Dovoljena obremenitev: 70 kg/m Mere valjev: 40x300 mm EMBALAŽA IN MERE: TNDG-3: 3530 x 670 x 430 mm (95 kg) Pgsdpepa Nzyefx Agxok TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) Veselimo se vašega sporočila! Plantec Maschinen GmbH

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle EM-28 rob za ojačanje i obrezivanje rubova edgemaster, godina proizvodnje 2006, na prodaju! Dužina furnirske trake: 420 - 2800 mm Širina furnirske ploče (poprečna vlakna): 400 - 4200 mm Debljina furnirske trake (uključujući obrezivanje): 0,3 - 1,5 mm Debljina furnirske trake: 0,3 - 2,0 mm Brzina proizvodnje (kontinuirana): 15 - 35 m/min Odrezivanje sa svake strane: 10 - 350 mm Širina trake (papira): 6 mm Debljina trake (papira): 0,16 mm, tip CP-99 Kolut (unutarnji i vanjski promjer jezgre): ∅ 75 mm, ∅ 325 mm Širina koluta: 65 mm Psdpfx Agjumrgaexegk Duljina trake na kolutu: 3200 m Električna energija: 1,1 kW Komprimirani zrak: 6 bar Potrošnja komprimiranog zraka: 5 NL/min

Stanje: novo, Typ: SX1325AP-2128 Achsen: Nutzbarer Arbeitsbereich X-Y-Z-Achse: 2070 x 2800 x 100 mm Werkstückhöhe in Z: 100 mm Max. Verfahrgeschwindigkeit: 70 m/min Max. Arbeitsgeschwindigkeit: 30 m/min Arbeitstisch: Phenolharz-Multifunktionstisch Anzahl Standardanschläge: 10 (4X-6Y) Vakuumpumpe: 4 x 5,5 kW (50/60 Hz), luftgekühlt Elektrospindel: Standardleistung (S6): 9,5 kW, ISO30 Max. Drehzahl: 24.000 U/min Werkzeugwechsler: ATC-Karussell für 12 Positionen Schmierung: Automatische zentrale Schmierung Installation: Installierte Leistung: 22–33 kW Druckluftverbrauch: 450 NL/min Absaugvolumen: 3.000 m³/h Pgedodz Edqepfx Agxjk Absauggeschwindigkeit: 25 m/s Absaughauben-Ø: 2 x 150 mm Hergestellt in China Gewicht: 3.500 kg

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Psdpfx Aecr T N Djgxogk Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: dober (rabljeno), Leto izdelave: 2010, Weinig Conturex C126 CNC Fensterfertigungsanlage Beschreibung: Baujahr: 2010 Arbeitsbreite: 40–260 mm Arbeitshöhe: 25–150 mm PowerGrip-Spannsystem Pgsdsx Tq I Eepfx Agxjk Tischbeladelänge Einzeltisch: 4 x 2280 mm Werkstücklänge Einzeltisch-Betrieb: 220–2700 mm Tischbeladelänge Doppeltisch (kombiniert): 2 x 4630 mm Werkstücklänge Doppeltisch-Betrieb ohne Folge: 220–5000 mm Werkstücklänge Doppeltisch-Betrieb mit Folge: 5000–6000 mm Komplett neuer PC & Software 2025 Vollständige Beschreibung auf Anfrage Verfügbar ca. Sommer 2026 (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer bei technischen Daten, Preisen und weiteren Angaben vorbehalten. Keine Gewähr für Druckfehler! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden