Tračna žaga

GEORGE CY270N

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band Guodpfx Aohpktvsa Uec - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Guodpfsudi Unjx Aa Usc Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Price does not apply to machines purchased in Poland.

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS260 bandsaw for cutting pipes, profiles and bars is widely used in all metalworking workshops where precision, quality and cutting speed are important. This model is equipped with a swiveling arm adjustable from 0–60°. The robust frame construction ensures precise and quiet operation. It features a removable chip tray for easy cleaning! Machine Features The horizontal metal bandsaw with a swiveling arm allows perpendicular cuts as well as angled cuts in the range of 0 to 60°. Material can be fed manually or via any mechanical device, while the blade feed is automatic. The blade guides are equipped with special carbide plates and bearings. This greatly enhances blade tracking, blade life, cutting accuracy, and cut quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with an efficient coolant pump with a closed circuit system. The saw arm is made from a single cast iron piece, and together with the 27 mm wide blade used in this saw, it allows reliable, repeatable serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features a quick clamp. The blade guides are equipped with carbide plates – solid carbide inserts – and a ball bearing system. It is THESE CARBIDE GUIDES that ensure the precision and straightness of the cuts. The upper surface of the base is formed as a tray for draining coolant and collecting chips generated during cutting. A cast iron work table with a swiveling arm and a control panel on a separate arm are mounted to the base. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed is provided by the downward movement of the arm. The feed speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is adjustable from the machine's control panel. There are two selectable blade speeds: 35 and 70 m/min. After the cut is completed (when the arm reaches the lower position), the blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that cut off power to the motor at the end of the cycle or upon opening any of the covers. Additional protection includes automatic machine shutdown in the event the blade breaks. Technical Specifications: - Blade size [mm]: 2520 x 27 x 0.9 - Blade tension: Mechanical (manual) - Blade speeds [m/min]: 35, 70 - Arm descent: Stepless – hydraulic cylinder - Vise base height [mm]: 860 - Saw wheel diameter [mm]: 300 - Saw frame swivel range [°]: 0–60 - Power supply: 3 phase, 400V Gedpfx Aoudi Uzoa Uouc - Main motor power [kW]: 1.1 / 1.5 - Coolant pump motor power [kW]: 0.05 - Dimensions with base [cm]: 150 x 80 x 140 - Weight [kg]: gross/net – 210 / 180 kg Included in delivery: - 2 x M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system Gsdjurc S Rjpfx Aa Usuc

Stanje: novo, Leto izdelave: 2026, Super-robust, reliable, and modern semi-automatic metal band saw with automatic arm raising and lowering. The saw arm swivels both left and right, from -45º to +60º. This machine is indispensable in any metalworking shop. The saw is perfectly suited for cutting pipes, profiles, and solid materials. Product Features The CORMAK S-200RH band saw comes standard with automatic arm lowering and raising, as well as a height regulator allowing the arm to be raised to match the height of the material being cut. Thanks to an automatic hydraulic damper, manual operation is limited to advancing and clamping the workpiece in the vise. The arm, made from a single-piece cast iron, together with the robust and stable frame, ensures exceptional rigidity for the S-200R saw, resulting in trouble-free operation and extremely high cutting precision. The innovative design and manufacture of CORMAK PREMIUM LINE semi-automatic and automatic saws, in accordance with ISO:90001 and ISO:140001 certification standards, ensures safety, quality, and reliability. The use of M3V series motors—from ABB, a renowned global manufacturer and world leader—guarantees long-lasting and trouble-free performance. As the manufacturer and sole representative on the Polish market, we ensure product authenticity and provide professional, well-trained warranty and post-warranty service. Technical Data TYPE – semi-automatic ARM RAISING AND LOWERING – hydraulic with stepless lowering adjustment BLADE SPEED – 36/70 mm/min MITRE CUTTING – left from 45° to right 60° VISE – hydraulic MINIMUM CUTTING DIAMETER – Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE – 30 mm VISE BASE HEIGHT – 780 mm SAW BLADE – 27x0.9x2910 mm TOTAL POWER – 2.1 kW DIMENSIONS (LxWxH) – 1600 x 800 x 1400 mm WEIGHT – 530 kg Angle 0º -----ø250 320 x 240 240 x 240 45º L ø200 220 x 120 190 x 190 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 Standard Equipment - Control console on separate pedestal - Integrated hydraulic unit - Hydraulic arm movement control (up and down) with stepless lowering speed adjustment - Arm position memory function (arm returns after the cut to a predetermined height) - Mitre cutting left/right 45° - 0° - 45° - 60° Godpfxji D D A Ss Aa Ueuc - Saw blade cleaning brush - Cooling system - Bimetallic band saw blade - CE Declaration of Conformity - Technical and operation documentation The listed price is NET. Price does not include shipping costs. For more information, please contact us by phone or email. Please visit our website to view our full range.