CNC rezkalni stroj

Geiss AG FZ 1000x800 ECO

Stanje: rabljeno, Leto izdelave: 2007, ENAOSNI DROBILEC WEIMA MODEL WLK15 GLAVNI MOTOR 90KW REZILA ROTORJA 50X50 (NOVA REZILA) DOLŽINA ROTORJA 1500MM PREMER ROTORJA 370MM STROJ JE 100% FUNKCIONALEN PRIPRAVLJEN ZA DELO Pjdpfotqdxfox Amfsra

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air Podowf Dvaopfx Amfsra - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Stanje: dober (rabljeno), Overall length (one piece): 3000 mm Edge height: 90 x 90 mm Pjdpshwwfxjfx Amfjra

Stanje: pripravljen za uporabo (rabljen), Dvě stroje Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specifikace Flake Purifier+ C 512 HR Color Sorter Repasováno v roce 2021 Technická data Průchodnost až (kg/h): až 3,8 Vhodná frakce: 2 – 20 mm Příkon (max. KVA): 3,4 Teplotní rozsah: +5°C až +40°C Hmotnost: 1300 až 1500 kg Elektrické připojení: Napájecí kabel 5x4 mm2 Jistič: 16 A Krytí: IP 54 Jmenovitý proud (max. A): 5 Specifikace Flake Purifier+ N 1024 Sesotec Polymer sorter Technické specifikace • Pracovní šířka: 1024 mm • Rozteč trysek / ventilů: 3,2 mm Predpfxjxlknmj Amfsa • Počet ventilů: 160 vysokorychlostních vzduchových trysek • Detekční rozlišení: 2 mm (optické) / 16 mm (kov) • Citlivost detekce kovů: Fe ≈ 0,6 mm | Al ≈ 0,1 mm • Průchodnost: až 3 – 3,8 t/h (v závislosti na materiálu a nastavení senzorů) • Třídicí technologie: CCD barevná kamera + detektor kovů (konfigurace „CM“) • Rozsah velikosti částic: 2 – 20 mm • Způsob separace: Ráz stlačeného vzduchu přes přesné pole ventilů • Krytí: IP 54 • Příkon: ≈ 3,4 kVA | 230 V, 50 Hz • Provozní teplota: +5 °C až +40 °C • Dosahovaná čistota: až 99,999 % (dle konfigurace) • Řídicí systém: Dotykové rozhraní se softwarem VISUTEC (volitelně vzdálený monitoring přes VISUDESK) • Modulární konstrukce: Možnost rozšíření o NIR senzor („N“) nebo další třídící moduly

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.574 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Roboter 1073651 / Steuerung 3100062 / Lineareinheit 152938, nosilnost: 210 kg, Das Industrieroboter-System KUKA KR 210 R2700-2 (QUANTEC-2) umfasst einen 6-achsigen Roboter mit 210 kg Traglast und 2701 mm Reichweite, kombiniert mit einer KR C4 Steuerung sowie einer KL 4000 Lineareinheit mit 12,50 m Länge. Der Zustand ist gebraucht/neuwertig mit 2574,03 Betriebsstunden. Die Anlage wurde zwischen 2021 und 2022 gefertigt und ist für Anwendungen wie Handling, Schweißen, Kleben, Montage und großflächige Automatisierung ausgelegt. Ausgestattet mit Software-Optionen wie SafeOperation, GlueTech, ExpertTech und Profinet MS sowie Versorgung über 3x 400V / 25A. Pjdpfx Amoy Ntv Refera

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, največja hitrost vretena: 22.000 obr/min, vrtilni moment: 128 Nm, nos vretena: 63, CNC Heidenhain iTNC 530 S.P. WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. Orientation of T-slots: parallel to the X-axis movement. AXIS CHARACTERISTICS: Feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING CLEARANCES Maximum horizontal passage: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from the floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut. Integrated cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axis: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Prodpfxjzb Evlj Amfea Maximum spindle speed: 22,000 rpm Tool interface: HSK – A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s actual capacities. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic chain-type tool changer with 30 stations located on the rear side of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent stations occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg MEASURING SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurization of measuring scales. SPRAY-MIST TOOL COOLANT SYSTEM: Mist lubrication system. The mist is produced by mixing air and oil. Activated via M function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving finishing quality. EXTERNAL TOOL COOLANT: Coolant supply system managed by CNC with nozzles arranged on the spindle flange, complete with 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A The machine is complete with: • Remote electronic handwheel Heidenhain HR550 • Various tool sets included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and electrospindle • Two chip conveyors on either side of the worktable • User and maintenance manual with CE declaration of conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 68.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.200 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 167 Nm, skupna masa: 35.000 kg, Premiere mise en service : décembre 2014 Commande : Fidia Axe X : env. 2 200 mm Axe Y : env. 3 500 mm Axe Z : env. 1 200 mm Axe A : ± 100° Axe C : ± 275° Machine sous tension : env. 68 000 h Heures total broche : env. 26 500 h Table de bridage : 2 000 x 3 500 mm avec rainures en T Tête à fourche 2 axes Puissance broche : 70 kW Vitesse de broche : max. 15 000 tr/min Couple : max. 167 Nm Porte-outils : HSK 100A Déblocage outil : hydraulique Prodpfsyrc Akex Amfea Entraînements axes linéaires Vitesse avance X, Y et Z : jusqu’à 50 m/min / 30 m/min Données de raccordement Tension : 400 V Fréquence : 50 Hz Dimensions, poids Encombrement machine hors périphériques : env. 8 000 x 6 000 x 5 000 mm Poids total : env. 35 000 kg Équipements supplémentaires - Installation de refroidissement - Changeur d’outils 26 positions - Carénage espace de travail - Convoyeur à copeaux En option, en supplément : - Palpeur de mesure radio - Laser BLUM État de la machine Entièrement fonctionnelle, en très bon état. Visible sous tension.

Stanje: rabljeno, DONNÉES TECHNIQUES - Nombre d’axes : 5 BROCHE DE FRAISAGE - Porte-outil : HSK63 - Vitesse de broche : 18 000 [tr/min] - Puissance entraînement broche : 25 [kW] AXES LINÉAIRES - Course X/Y/Z : 760 / 510 / 520 [mm] - Vitesse de déplacement rapide (X/Y/Z) : 45 / 45 / 40 [m/min] AXE PIVOTANT A - Course : -110 / +30 [degrés] AXE PIVOTANT C - Course : 360 [degrés] - Vitesse de déplacement rapide : 25 [tr/min] CHANGEUR D’OUTILS - Type de changeur d’outils : Bras chargeur - Nombre d’outils dans le magasin : 40 TABLE - Dimension table : Ø248 [mm] - Charge max. sur table : 200 [kg] ALIMENTATION ÉLECTRIQUE - Tension alimentation : 400 [V] - Puissance totale : 48 [kVA] POIDS ET DIMENSIONS - Encombrement : 3.940 x 4.060 [mm] - Hauteur de la machine : 2.865 [mm] - Poids de la machine : 6.000 [kg] ÉQUIPEMENTS - Commande : Hurco WinMax / MAX5 - Programmation teach-in - Volant électronique - Réservoir de liquide de refroidissement * avec pompe haute pression - Lubrification interne (IKZ) Prjdjy Tzctspfx Amfoa - Convoyeur de copeaux - Refroidissement de broche

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stroj DU 1500 x 1000 x 620 T7 št. 98 15254 Velikost plošče: 1000 x 800 mm, globina vleka: 620 mm Leto izdelave: 1998 Nazivni tok: 238 A Skupna priključna moč: 164,5 kW Upravljanje: Siemens OP 37 Oprema: • Podajalni stroj • 6 hladilnih ventilatorjev • Zgornji štančnik • Nadzor obesa folije Prjdpexmgvcefx Amfja • Nastavljiv napenjalni okvir z motornim pogonom • Bliskovni sevalnik • Pirometer za ogrevanje • Pirometer za hlajenje

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 50 h, številka stroja/vozila: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Pjdpowwq Hcjfx Amfsra Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminium with T-slots, crosswise every 250 mm Max. load: 1,000 kg evenly distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow air / MQL: external Linear axis drives Feed rate X and Y axes: up to 50 m/min Feed rate Z axis: up to 30 m/min Colour Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - 15-position tool changer - Control unit in separate, mobile console