Ekscentrični tisk
GARNET PE4-160

Name: GARNET PE4-160
Brand: GARNET
Price: 65000 EUR
Availability: InStock

EXW Začetna cena brez DDV

65.000 €

Leto izdelave

2022

Stanje

razstavni stroj

Lokacija

Bellpuig

Prikaži karto

Podatki o stroju

Opis stroja:: Ekscentrični tisk

Proizvajalec:: GARNET

Model:: PE4-160

Leto izdelave:: 2022

Stanje:: kot nova (razstavni stroj)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

EXW Začetna cena brez DDV

65.000 €

Lokacija:: Ctra. N-II km. 496 · Pol. Ind. Hostal Nou, 2, 25250 Bellpuig, España

Klic

Tehnične podrobnosti

Globina grla:: 350 mm

Skupna višina:: 3.200 mm

Širina mize:: 1.100 mm

Dolžina mize:: 700 mm

Nastavitev hoda:: 150 mm

Skupna širina:: 1.860 mm

Skupna dolžina:: 3.200 mm

Skupna masa:: 8.000 kg

Stiskalna sila:: 160 t

Tabela razdalj do bata:: 500 mm

Leto zadnje generalne obnove:: 2025

Oprema:: varnostna svetlobna zapora

Podrobnosti ponudbe

ID ponudbe:: A19850770

Št. reference:: PE4-160

Nazadnje posodobljeno:: dne 27.08.2025

Opis

ECCENTRIC PRESS GARNET WITH “C” FRAME
MODEL: PE4-160 – SHOWROOM MACHINE

DESCRIPTION:
Frame constructed from welded and stabilized steel. The ram is made of welded steel, guided by four slides, and features a base designed for oil recovery.
The drive between the motor shaft and the eccentric shaft is via a gearbox with precision-ground gears, allowing operation at high tonnage with relatively low nominal speeds.

The clutch-brake unit is electrically and pneumatically actuated, equipped with a dual-body safety solenoid valve and cross-flow safety circuits.
The pneumatic installation features a compensation tank, filter-regulator-lubricator group, control pressure switch, and a safety valve.

Centralized automatic lubrication with progressive lubrication system.
Electrical panel with programmable PLC (Omron or Pilz) and electrical components from Siemens or Schneider.
Operation by dual-hand push buttons and a low-voltage electric foot pedal.
Safety provided by light curtains (photoelectric barriers) and side guards with safety microswitches for opening control.
Emergency stop buttons provided.
All components comply with CE standards.

FEATURES:
• Reinforced welded steel frame.
• Four anti-friction sliding guides.
• DIN-650 “T” slots for tool clamping.
• Two-hand operation + foot pedal activation.
• Piece counting system.
• Programmable PLC.
• Hydraulic overload release system for ram unlocking.
• Rotating two-cam limiter.

MODEL PE4 – 160
Nominal capacity t 160
Strokes per minute 45
Nominal tonnage height 6 mm
Stroke adjustment 20-150 mm
Max. closed mould height 350 mm
Distance bed to ram 500 mm
Ram adjustment 70 mm
Bed dimensions 700 x 1100 mm
Ram dimensions 370 x 620 mm
Bed central bore diameter 280 mm
Ram bore diameter 55 mm
Throat depth 350 mm
Main motor 11 kW
Number of connecting rods 1
Number of guides 4
Safety light curtains yes
Nsdpfew S Huwsx Adyewb
Dual-body safety valve yes
Pneumatic clutch yes
Anti-vibration silent blocks yes
Overall width (W1) 1800 mm
Overall depth (D1) 1860 mm
Overall height (H1) 3200 mm
Approx. weight 8000 kg

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2025

25 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+34 973 3... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Ekscentrični pritisk - enojni stolpec WEINGARTEN ARP 250 (UVV)

Eislingen/Fils

489 km

Ekscentrični pritisk - enojni stolpec
WEINGARTENARP 250 (UVV)

Klic

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Nedovuuaispfx Adyowb Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Poglej podrobnosti

Mali oglas

CNC upogibni stroj, stiskalnica za upogibanje z 8 osmi, AMADA PROMECAM, upogibni stroj, upogibna sti AMADA HFBO 50 x 2000

Hessisch Lichtenau

682 km

CNC upogibni stroj, stiskalnica za upogibanje z 8 osmi, AMADA PROMECAM, upogibni stroj, upogibna sti
AMADAHFBO 50 x 2000

16.000 €

Stalna cena brez DDV

Klic

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h Nwodpfsw Iq Ugox Adyeb - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Poglej podrobnosti

Mali oglas

Ekscentrična stiskalnica z enim stolpcem WMW Blema PEDHX 160-80 MHSYZ-ES/KK

Berlin

713 km

Ekscentrična stiskalnica z enim stolpcem
WMW BlemaPEDHX 160-80 MHSYZ-ES/KK

Klic

Mali oglas

Wermelskirchen

796 km

Ekscentrični tisk
WeingartenARP 200

Klic

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, globina grla: 440 mm, nastavitev hidravličnega cilindra: 110 mm, skupna višina: 18.200 mm, širina mize: 800 mm, dolžina mize: 1.100 mm, skupna širina: 24.000 mm, skupna dolžina: 37.200 mm, skupna masa: 12.600 kg, stiskalna sila: 200 t, tabela razdalj do bata: 400 mm, moč: 15 kW (20,39 KM), Plunger stroke: 40–180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 per min Distance table/ram – adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter Nwjdstu Hvwopfx Adyjb

Poglej podrobnosti

Mali oglas

Ekscentrični pritisk - enojni stolpec EBU HK 200 FR

Schmölln

563 km

Ekscentrični pritisk - enojni stolpec
EBUHK 200 FR

Klic

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Clear opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Ram bore: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Die height (max. stroke, ram adj. up): 600 mm Die height (stroke down, ram adj. up): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Space requirement approx. (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch Nwjdpfx Ajvbk Rwsdyob - Fixed table - Hydraulic overload protection in ram - Hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital readout, rapid/creep mode - Fully automatic stroke adjustment, range 16 - 160 mm - Ram weight compensation - Electronic TDC correction - Planetary gearbox - Centralized circulating oil lubrication - Separate control console with screen control SIMATIC S7/300 - Press force measuring device - Reversing circuit (return stroke) - Additional operating mode "setup/creep mode" - Electric stroke counter - Electric preset counter - Electric travel limitation of connecting rod pin - Electronic cam controller - Infinitely variable drive (frequency-controlled) - 2 sockets - Clamping plate - Temperature monitoring for main / support / connecting rod bearings - Operating hours counter - Oil cooler - Set of anti-vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Poglej podrobnosti

Mali oglas

Ekscentrični pritisk - enojni stolpec HELMERDING ERH 150 B

Plettenberg

768 km

Ekscentrični pritisk - enojni stolpec
HELMERDINGERH 150 B

Klic

Leto izdelave: 1987, Stanje: rabljeno, Pressure: 150 t Throat depth: 350 mm Stroke: 20–120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Table size: 1150 x 670 mm Ram surface: 800 x 380 mm Through-hole in table: 330 x 200 mm Table height: 800 mm Pin bore in ram: Ø 50 mm Machine weight: approx. 8 t Space requirement (WxDxH): approx. 2000 x 2000 x 2700 mm Nodpfx Adop Apxhsyowb Features: - Hydraulic clutch-brake combination - Centralized oil lubrication - Mechanical overload protection in ram - Semi-automatic stroke adjustment - Manual ram adjustment - Two-hand control - Foot pedal operation - Counter bearing

Poglej podrobnosti

Mali oglas

Ekscentrični pritisk - enojni stolpec DIRINLER CDCS 2500 P (CE)

Eislingen/Fils

489 km

Ekscentrični pritisk - enojni stolpec
DIRINLERCDCS 2500 P (CE)

Klic

Stanje: rabljeno, Leto izdelave: 1995, Pressure: 250 t Throat depth: 450 mm Stroke: 8 - 135 mm Strokes per minute: 50 Njdpfovuk Hxox Adyswb Distance table/ram, max. stroke up, upper adjustment: 635 mm Table surface: 1250 x 850 mm Pass-through opening in table: 355 mm Table height above floor: 950 mm Clearance between frame walls: 660 mm Ram surface: 790 x 610 mm Ram adjustment: 130 mm Drive power: 18.5 kW Weight: 14.0 t Space requirement (W x D x H): 1.5 x 2.8 x 3.65 m Approved for manual feeding according to CE standard Equipped with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical ram overload protection, manual stroke adjustment, manual ram adjustment, pneumatic ram counterbalance, fixed table, motorized central lubrication, two-hand operation Machine can be inspected under power at our warehouse

Poglej podrobnosti

Mali oglas

Ekscentrična stiskalnica z enim stolpcem W. Paul Müller ExP 160

Strassberg

500 km

Ekscentrična stiskalnica z enim stolpcem
W. Paul MüllerExP 160

Klic

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke down, adjustment up): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min⁻¹ Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment: Machine includes: - Guard HS Decoiler M 15 / 500 - Year of manufacture 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outside diameter: 1400 mm Coil inside diameter: 380 - 530 mm HS Straightening Machine RME 40 - 9 - Year of manufacture 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m/min Feed length: 0 - 9999.99 mm Additional equipment: Nodpfxouqdwxj Adyowb The machine was retrofitted with SIEMENS S7 control in 2009.

Poglej podrobnosti

Mali oglas

Cilindrični brusilni stroj - Zunanjost KELLENBERGER 600 U

Metzingen

506 km

Cilindrični brusilni stroj - Zunanjost
KELLENBERGER600 U

Klic

Mali oglas

Avola

1.028 km

Ekscentrični tisk
PRESSIXT160 CNR6

Klic

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of manufacture: 2000 Nominal force: 1600 kN Mass: 13,800 kg Nominal stroke rate: 55 spm Min./max. strokes per minute: 10/55 spm Max. insertions per minute: 17 spm Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Safety distance: 355 mm Energy (at 15% nominal strokes): 14,500 kJ Ram stroke min./max.: 10/200 mm Ram adjustment: 110 mm Upper dead center (adjusted high): 430 mm Maximum ejection stroke: 60 mm Bed size (H x D x W): 78/750/1250 mm Ram size (D x W): 600/850 mm Shank diameter: 60 mm Throat depth: 370 mm Max. die size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Stop position: TDC (Top Dead Center) Voltage: 380 V Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with safety locks; • Clutch friction discs; • Clutch pins and bushings; • Flywheel bearings; • Flywheel oil seals; • Stroke change nosepiece; • Balancer cylinder seal kits; • Air pressure gauges; • Electrical control panel; • Inverter (speed variator); • Motor; Njdpfjwaiw Ssx Adyswb • Motor pulley; • Refurbished work table (CNC machined) Supplied with six (6) months warranty, technical documentation and CE compliance certification. Electrical panel warranty twelve (12) months.

Poglej podrobnosti

Oglašujte tukaj