Stiskalnica za telo

Ganner Concept 70 Eco

Leto izdelave: 2025, Stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Kedew Nafkspfx Adiedw Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Kjdpfx Aei Hpk Uodiedw Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, LAMELLA - CORPUS PRESS GANNOMAT « CONCEPT 70 ECO » Kjdpfx Adjw Td A Ieisdw Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lamella pressing beam, TOP with 6 elements, lamella pressing beam, SIDE with 5 elements - Lamella pressing beams featuring the proven tolerance compensation system (Ganner System) for tightly compressed carcass joints - Counterpressure surfaces (side pressure wall, base) are 38 mm thick, laminated, continuous support plates - Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam - Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance carrier nuts with grease reservoir - Pressing is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressing beams is infinitely variable and electronically adjustable via 2 potentiometers and regulated by a frequency converter, making the pressing force control completely wear-free - Pressing force for the horizontal pressing beam: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg); Pressing force for the vertical pressing beam: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. Kjdpfx Adeb Eln Deiedw The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: novo, No. 3187 Vacuum Dryer / Drying Chamber ISVE ES 5 / NEW New machine, delivery time: 120 days Design features: Stainless steel AISI-304, partially insulated External diameter: 1,600 mm Cylindrical section length: 5,000 mm Dryer length: 5,900 mm Total dryer length with rails: 11,000 mm Max. operating vacuum: -730 mm Hg Stack length (wood): 5,000 mm Stack width (wood): 1,100 mm Stack height (wood): 990 mm Net wood volume: approx. 5 m³ Kodpfx Ajvc Axpedisdw Installed electrical power: 16.01 kW Average hourly power consumption: 8 kWh Included: - 12 electric heating plates (each 1,100 x 5,000 x 10 mm LWH / 57 kg / 1.25 kW) - 2 internal condensers (turbofans, each 0.55 kW 380 V AC, with stainless steel pipes) - 1 check valve (one ¾” for vacuum circuit) - 1 solenoid valve for air recirculation (24 V AC: one 1” for autoclave) - 1 manual air recirculation (1” ball valve) - 1 electrical control unit (Siemens S7-1200 PLC with touch panel) - 1 ISVE Server Connect module for remote maintenance and operation - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measuring wood core temperature) - 2 plate holders - 1 operating manual (in English, with CE certificate and wiring diagrams) Transport dimensions approx. 5,900 x 1,620 x 2,300 mm LWH Weight approx. 2,900 kg Technical specifications, year of manufacture, and scope of delivery according to manufacturer, without guarantee Subject to prior sale For new machines, the manufacturer's warranty conditions apply Photos and videos are for reference only and may not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, LAMELLA/CASE CLAMP GANNOMAT "CONCEPT 70 ECO" complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates, 40 mm thick - Electromechanical adjustment of both pressing beams via precision trapezoidal-threaded spindles (with increased pitch and runout accuracy) and high-performance lead nuts with grease reservoirs - Pressing is performed electromechanically, by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force 2000 daN (kg) per pressing beam - The pressing force of the pressing beam is electronically controlled and adjustable via frequency converter, making torque transmission completely wear-free - Pressing and adjustment speed: 25 mm/sec Kdodpfew Tdymjx Adiew - Extremely simple operation via 6 separate push buttons, 6 movement sequences selectable through the control unit - Freely adjustable pressing time pre-selection with automatic opening, 0-30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Used machine: Year of manufacture 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg Kdedeiidm Nopfx Adijw - available immediately -

Stanje: rabljeno, Leto izdelave: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine will be completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text for operating mode and error diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function in control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4500 rpm Saw blade diameter: 300 mm Air requirement: 1200 m³/h Air velocity: 20 m/s Static negative pressure: 1200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height: 2990 mm Kdodjw Nac Aspfx Adiew Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connected load: 5.7 kW with Supercut scoring unit with pneumatically tiltable saw unit with longitudinal stop for lower workpiece support with short flip rail, complete Availability: by arrangement Location: Flörsheim

Stanje: rabljeno, Kündig Duplex 1350 KdS-E Brilliant + Lacquer Quality product from Switzerland CONSTANT PASS LINE MACHINE / Automatic Head Adjustment Wide Belt Calibrating and Fine Sanding Machine 1st Unit: Combination Unit with 90 Shore Contact Roller and Sanding Pad Unit with Electronically Controlled Segment Sanding Shoe Contact roller level infinitely adjustable according to grit scale Sanding unit tiltable for diagonal sanding Infinitely variable sanding belt speed: 3 - 18 m/sec Oscillating belt blow-off 2nd Unit: Sanding pad unit with electronically controlled segment sanding shoe Kdsdow Elvzspfx Adisw Sanding belt drive motor power: 15 kW Working width: 1350 mm Max. workpiece thickness: 160 mm Feed speed infinitely adjustable: 3 - 15 m/min Stable vacuum table with lacquer carpet Automatic workpiece thickness adjustment ENORMATIC quick adjustment with feed release (for long workpieces) PLC control with LCD screen for automation and management of all work programs Infeed and outfeed tables with roller supports Machine is FULLY REFURBISHED, IN TOP CONDITION Available from stock Lieboch

Leto izdelave: 2021, Stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW –: Price ex works incl. loading! 1 rack unit with 4 uprights: €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different centre distances); this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 5.18m high, hot-dip galvanized - IPE 180 / 80 - Each with 2x3 adjustable arms, 1.20m length, 500kg load capacity per arm - With cross bracing approx. 1.30m - Double-sided uprights approx. 5180mm high, hot-dip galvanized - Base and arm depth: 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with load center at 600mm: 500kg per arm / 2,600kg per upright side - With longitudinal and diagonal bracing, centre distance = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - For lengths from 1.50m, a small surcharge applies to the listed price! - Special sizes (different centre distances) available on request for an additional charge and longer delivery times, as they must be custom-manufactured! Kjdpfx Aoddmq Tjdisdw - If you do not specify otherwise, we will supply the rack with a centre distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!