Stroj za vrtanje in vstavljanje čepov

GÖTZINGER Power Drill -300 Video -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Kopirna rezkalna naprava URBAN MLA A23 z izravnalno napravo, letnik 2005 Stanje: zelo dobro Bodpfx Aowhumhofnowi

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), A used, very well-maintained cold circular saw from EISELE equipped with a 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Bwodpfxskfp D Tj Afnji Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100x100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865 x 1332 x 2175mm Weight: 460kg For further technical data, please refer to the PDF document. Technical data and dimensions: Subject to change and errors.

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Max. roll diameter: 1250 mm, max. speed: 100 m/min, weight: 2.9 t. Bwjdpfsf H Dlbex Afnji

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Bwodsfzzhyopfx Afnoi Available immediately. Total price: €17,000. Condition: very good!

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Bodpogwbbqefx Afnewi Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: rabljeno, Leto izdelave: 2007, Stroj za vrtanje lukenj za moznike URBAN DB 3100, letnik 2007 Bsdjwinq Nopfx Afnjwi Stanje: zelo dobro - Sistem za vpenjanje profilov in premik vrtalnega agregata upravljan s stopalko - Električni vrtalni motor se ob koncu vrtanja samodejno izklopi - Hitrost podajanja in globina vrtanja sta nastavljivi posamično - Hitro-vpenjalna glava za standardna svedre do max. Ø13mm - Levi in desni podaljšek mize

Stanje: rabljeno, Manufacturer: TRUMPF Model: CS20a Bjdpfj Dv I Tsx Afnowi EXCELLENT CONDITION

Stanje: rabljeno, Number of milling spindles: 2 pcs. Stop: 1 pc. Tool included: yes Cross rail milling machine STEGHERR, model KSF-mini ----- Including stop rail with measuring scale and sliding stop. Including tools. Special milling machine for efficient production of cross muntin joints. The cross rail milling machine KSF-mini is the result of STEGHERR's extensive experience in the construction of these specialized machines for cross muntin joinery. With the KSF-mini, all types of cross muntin joints commonly found in practice can be produced quickly and with a precise fit. Pre-profiled muntins can also be processed on the KSF-mini. Precise recessing is achieved as the workpiece is processed on three sides in a single clamping operation. The tool drive is provided by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed for the bar width. The saw blades used for notching can be adjusted to the dimensions of the profile cutter using spacers. The machine is suitable for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Bjdpfx Aswi Upfofnewi Pneumatic pressure: 6 bar Included: ----- Table stand Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (for bar width 10 mm) Stop rail with measuring scale and sliding stop as shown in the photos. Installation dimensions (approx. LxWxH): 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data as per manufacturer, without guarantee!)

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Bjdpfjvwbp Aex Afnewi

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Bwsdpfxoqu N U Dj Afnei Maksimalni tlak: 5 bar