Ventilator za odsesavanje sekancev 15 kW

Finnrose FMT75

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate Hsdpfxewka Ups Ab Esfd - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW Hfedpfohfufgjx Ab Esd -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: novo, volumenski pretok: 0,984 m³/h, Atlas Copco G7FF 500 L Screw Compressor – NEW Specification: • Condition: New • Manufacturer: Atlas Copco • Output: 984 l/min • Main motor power: 7.5 kW • Tank capacity: 500 l • Maximum working pressure: 10.0 bar Hfedpfxohkttpo Ab Eed • Integrated refrigerated dryer • Electronic control of compressor operating parameters • Soundproof enclosure (only 67 dB) • CE compliant • User manual in Polish • Weight: 227 kg Additional information: • Manufacturer’s warranty available upon commissioning by an authorized Atlas Copco service provider • Available within 7 working days

Stanje: novo, Leto izdelave: 2026, The manufacturer guarantees the cleaning quality. Extraction systems with electronics and VIBER Power technology motors enable continuous filter monitoring. Technical data: • Complies with H-2 standard • Extraction capacity ~ 4,500 m³/h • Motor power 3.0 kW • Speed 3,000 rpm Hodogyfmajpfx Ab Eofd • Voltage 400 V, 50 Hz • Extraction port 200 mm • Filter material: polyester, 5 microns • Filter surface area 8.8 m² • Air speed 28 m/sec • Number of filters: 18 • Dimensions: 752 x 1502 x 2144 mm • Weight: 180 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB (without connection), 65 dB (when connected to the machine via ductwork) Scope of supply: - Polyester filters, 5 microns - 2 collection bins - Chassis - Filter cleaning system with vibration control - Fire extinguisher + €850 for models with fire extinguisher (Safe System)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, working area: 2700x1250mm Z-axis travel: 160mm rotary C axis electrospindle power: 8.5kW electrospindle speed: 24,000 rpm convenience tool magazine for 8 tools main tool magazine for 10 tools sawing aggregate on X and Y axes vertical drills on X axis – 8 units Hfjdpfx Abswp R Eio Ejd vertical drills on Y axis – 5 units horizontal drills on X axis – 4 units horizontal drills on Y axis – 4 units HSK 63 tool holders central lubrication pump vacuum raster table edge milling unit on X axis year of manufacture: 2011

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Manufacturer: SCM Hfodsw Ahr Tspfx Ab Esd Model: PRATIX 22 Year of manufacture: 2017 Working area X: 3086 mm Working area Y: 2155 mm Working area Z: 150 mm Number of milling spindles: 1 Main motor: 9.5 kW Max. spindle speed: 24,000 rpm Fixed clamping points for aggregates Tool holder: HSK-F63 Tool magazine capacity: 19 positions Gantry construction Machine with moving gantry Grid table Vacuum pump Two vacuum pumps with a capacity of 250 m³/h each Drilling unit

Stanje: rabljeno, tool measuring device Hfjdoddtuyepfx Ab Eed manufacturer: Mitutoyo type: Quickset R

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 2600 mm Oscillation: yes Hfjdpeiuld Dofx Ab Esd Sanding rollers for curves: 1 Tiltable sanding unit: yes Table size: 750 mm x 290 mm Extraction port: 120 mm Motor power: 3 kW Machine length: 1700 mm Machine width: 700 mm Weight: 180 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.100 h, Still a very nice longitudinal saw with only 1,100 operating hours, almost like new. Manufacturer: Irion, Model: HFS 170, Year of manufacture: 1993 Maximum cutting length: 6,200 mm Maximum cutting width: 600 mm Maximum cutting height: 170 mm Hedpev T Rc Dsfx Ab Ejfd Equipped with digital width display and laser.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, - Working area: 3050x1250mm - Main spindle: 11/13kW (S1/S6) - C-axis - Drills: 8 vertical, 2+2 horizontal Hfsdpfxswiuz Us Ab Eod - Grooving saw - Tool magazine: 10 positions