Stiskalnica za fino oblaganje - hidravlična

FEINTOOL HLT 1250

Leto izdelave: 2008, Stanje: rabljeno, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Slide adjustment: 120 mm Slide area: 2000x1100 mm Bolster area: 2000x1200 mm Die opening in table: 1700x250 mm Shut height (bottom), slide adjustment top: 500 mm Side frame window: 820x650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in slide Semi-automatic stroke adjustment Motorized slide adjustment Stroke rate frequency-controlled Central grease lubrication for guides Oil circulation lubrication Slide counterbalance cylinders Safety doors front/rear Hydraulic die clamping system Extendable bolster plate Hydraulic rollblock strips in table Feed unit: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Loop control, height adjustment via geared motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm, Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency-controlled up to 25 m/min Strip introduction aid: transfer table with hydraulic separating wedge, hydraulically adjustable Hold-down hydraulically adjustable Strip edge guidance: 1 pair of lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers Ø140 mm, pneumatically adjustable Hodpfjrdi Dlsx Ab Tsfr Straightener: 9x rollers Ø70 mm, adjustment manual via handwheel Decoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency-controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 7/4986, Total pressing force: 250 - 400 t Hydraulic ring serration force (lower table): 20 - 200 t Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring serration stroke: 40 mm Counterholder stroke: 40 mm Hfedeuqdxispfx Ab Tor Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min⁻¹ Rapid approach speed: 120 mm/s Rapid return speed: 135 mm/s Working speed: 5 - 50 mm/s Total tool weight: 2400 kg Standard equipment Automation Roll-off trough with straightening machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, dolžina gredi pod glavo: 30 mm, dolžina odseka (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Hfedpfour N Dasx Ab Tor Year of manufacture: 1970 The machine is immediately ready for operation!

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 39035,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Hjdpfxevwgl No Ab Tofr Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: zelo dobro (rabljeno), vrsta goriva: električni, barva: zelen, Leto izdelave: 2015, obratovalne ure: 25.987 h, Year of manufacture: 2015 Unladen weight: 30,000 kg Mast length: 13 m Technical condition: very good Visual condition: very good Price: On request Serial number: 825.7.2315 Contact Ferdinand Pater for further information. Colour: Green Mast length: 13 m Stock no. D19 Machine Brand: Sennebogen Model: 825AE-D Series Weight: 30 tonnes Serial number: 825.7.2315 Year of manufacture: 2015 Operating hours: 25,982 Engine: Electric motor 400V 110kW Boom: K13 boom configuration, boom 7.5 metres, stick 5.8 metres Cab: Maxcab industrial cab, hydraulic cab elevation, 2.7 m high, gantry walkway at the cab, additional window 320x270mm in the cab floor Upper structure: Standard Sennebogen paint, central lubrication system, Hydro-Clean filter Hjdpfjt Dlv Njx Ab Tefr Undercarriage: Sennebogen ST20, 400x400 incl. 2x 5 tonne additional counterweights, 1 metre additional pylon Lighting: Multiple (LED) lights on boom, stick and cab Extra: The machine is equipped with a brand new original Sennebogen slewing ring, maintained, clean and ready for operation.

Stanje: rabljeno, Leto izdelave: 1988, Technical Details: Hjdsvmht Hepfx Ab Tsfr Pressing force: 630 t Sheet thickness: 16 mm Total nominal force: 630 t Stroke: 30 – 150 mm Ring-tooth force: 320 t Nominal force: 160 t Lower clamping surface: 910 x 1050 mm Upper clamping surface: 900 x 900 mm Installation height: 410 mm Ram adjustment: 120 mm Sheet width: 40 – 450 mm Sheet thickness: 0.5 – 16 mm Feed length: 1 – 1000 mm Total power requirement: 100 kW Machine weight approx.: 28 t Space requirement approx.: 4.50 x 2.20 x 2.80 m Fineblanking press with: - Levelling device

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 6.898 h, številka stroja/vozila: 2253736, Oprema: hidravlika, kabina, pogon na vsa štiri kolesa, Recently received a new slewing gear and starter motor. Hodpjwb Eq Defx Ab Tsfr Invoices available. For more details, refer to the type plate.

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 01/2437, Total pressing force: 250 t Hydraulic annular ram force (lower table): 30 - 125 t Hydraulic counterforce (upper table): 30 - 125 t Ram stroke: 67 mm Clamping area of table approx.: 560 x 600 mm Clamping area of ram approx.: 560 x 560 mm Hfjdpou U Nimofx Ab Ter Number of strokes: 80 min-1 Machine weight approx.: 14,000 kg Standard equipment Automation Recoiling tray with straightening machine

Stanje: rabljeno, Leto izdelave: 1978, Pressure: 150 t Fixed stroke: 80 mm Stroke rate: 30–150 strokes/min Column width: 930 mm Hsdpfsvut Ursx Ab Tjfr Installation height (stroke + ram adjustment at top): 400 mm Lateral column opening: 650 mm Table area: 880x1300 / 1500x600 mm Through-hole in table: 760x180 mm Table height above floor: 1270 mm Ram area: 920x1000 / 1300x600 mm Weight: 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with steplessly adjustable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed unit As-is, as currently situated, WITHOUT commissioning Price for commissioning (with new control system) on request