Fina stiskalnica za slepi tisk

FEINTOOL MFA 2500

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 36 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Maximum travel: 420 mm Minimum automatic travel: 1 mm Table feed rate: 100–3500 mm/min Reversal dwell time: 0–5 sec Table tilt angle (400/650 mm): 30°/15° CROSS SLIDE: Maximum travel: 170 mm Rapid traverse: 30 mm Plunge depth per diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual travel: 120 mm Swivel range to the right: 15° + 30° Optional wheelhead guard for max. wheel set width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Max. load during unsupported grinding: 12 Nm Optional continuously variable drive, adjustment range I: 30–300 rpm Optional continuously variable drive, adjustment range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Straightness of generator: Between centers 400 mm Hodow T Sc Nopfx Adxefb Measured over 400 mm: 0.002 mm Between centers 650 mm Measured over 650 mm: 0.003 mm Roundness deviation for unsupported grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Admissible voltage variation: –15% to +10% Admissible frequency variation: +/- 3% Compressed air: 5 bar Unless otherwise stated, technical data is provided without obligation or warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder according to ISO 40 Hfodpfx Aehlp Iwjdxob Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping available throughout Germany and Austria. Surcharge: €1,000 Sale excludes any warranty.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Hjdpfouxfucox Adxjfb Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: dober (rabljeno), Leto izdelave: 1997, Die Maschine ist in gutem Zustand. Hodpfx Aepy Erredxsfb

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Hfjdpfxoia Rtde Adxsb Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, stružna dolžina: 3.000 mm, premer struženja: 1.050 mm, največja hitrost vretena: 1.500 obr/min, zunanji premer vpenjalne glave: 375 mm, マルチタスキングマシン OKUMA MULTUS B750 C3000 年式：2017年 OSP-P300SA Hjdpfx Aewi Ezrodxefb 15インチチャック 最大加工径：1050mm 最大加工長：3000mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, Največja teža obdelovanca: 500 kg Pomiki: X: 350 mm Y: 250 mm Z: 300 mm Hfsdpfx Ajv Ai Ukodxeb C: 360° Leto izdelave: 2017 16-pozicijski izmenjevalec RTC

Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Hedpfx Adsuqacksxofb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Hsdpfx Ash Dzqljdxofb

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Hfodpfx Ajvvvw Eodxjb Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.