Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE Telemax Sattelauflieger - hydr. gelenkt

The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website.

Extract from the equipment list. Full specifications available upon request.

Loading Platform:
* Gooseneck, length approx. 3,900 mm with central beam
* Loading platform, double extendable, length approx. 9,300 mm
* A support plate, approx. 200 mm wide, is permanently welded to the central beam
* Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions)
* Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Brand at our discretion
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for operating hydraulic functions
* 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside
* 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN)
* 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm
* 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm
* 1x at the rear of the gooseneck
* 2" king pin
* Mechanical landing gear with 2-speed gearbox and crank
* 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm
* 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside
* Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit
* Last axle with air bellows venting activated when parking brake is applied
* Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL
* Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917)
* 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar
* Approx. 32 mm wooden floor on the gooseneck and the loading platform
* On the large-section extension tube, one locking position every approx. 500 mm
* On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm
* Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN)
* 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm
* 4 wheel chocks with holder mounted under the loading platform
* 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel
* 1 LED work light each left and right in front of the axles, with wiring
* 2 axle load gauges mounted on the left side including axle load diagram
* 1st axle equipped with automatic lift axle function as well
Ijdpfx Aoyvnd Njb Ajtg

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.