Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE Telemax Sattelauflieger - hydr. gelenkt

You can find our complete range of vehicles, including those available for immediate delivery or short notice, on our website.

Below is an excerpt from the equipment specification. The complete specification is available upon request.

CARGO AREA:
* Gooseneck, length approx. 4,300 mm, with central beam
* Cargo area with double-extending design, length approx. 9,300 mm
* A support table approx. 200 mm wide is solidly welded to the central beam
* Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the relevant cargo bed length (except the supply for the first locking point)
* Technical fifth wheel load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system compliant with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntable
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Make: our choice
* ASPÖCK UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations. No supply connections installed on the tractor unit
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward
* 1 pair of lashing rings at the kingpin (LC 10,000 daN), all other lashing rings (LC 5,000 daN)
* 4 pairs of stake pockets embedded in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 transverse stake pocket rail mounted on the deck of the gooseneck for plug-in stakes approx. 100 x 50 mm; 1x at rear of gooseneck
* 2-inch kingpin
* Mechanical landing legs with 2-speed gearbox and crank
* Approx. 32 mm wood flooring on the gooseneck and cargo area encased in ALU-omega profiles
* 10 pairs of recessed lashing rings lying in the outer frame of the cargo area, foldable outward:
- 1 pair of lashing rings each in front of the last axle and on the end traverse of the trailer (LC 10,000 daN)
- all other lashing rings (LC 5,000 daN)
* 8 pairs of stake pockets embedded in the outer frame of the cargo area, for plug-in stakes approx. 100 x 50 mm
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left
* Steering from front and rear via cable remote control, with single-track control of the axles, without installation on the tractor unit
* Front wall made of steel, approx. 1,800 mm high, certified version according to EN12642:2016 XL
* Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
* 1 LED work light mounted left and right at the landing legs, wired to the tractor unit connection
* 3 transverse stake pocket rails mounted on the cargo area floor, for plug-in stakes approx. 100 x 50 mm
* 1 additional removable intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with hardwood covering
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left
* WADER container pockets integrated in the cargo area for the transport of:
Njdpfx Agoxc Axxs Toku
- 1 x 20' container at the center of gravity
- 2 x 20' containers
- 1 x 40' container
* 1 LED work light each left and right in front of the axles

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.