Polpriklopnik z nizko nakladalno ploščadjoFAYMONVILLE
MAX 710 Tiefbett 2+4 PA ATX
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLE
MAX 710 Tiefbett 2+4 PA ATX
Stanje
Novo
Lokacija
Essen 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
- Lokacija prodajalca:
- Heegstraße 6-8, 45356 Essen, Nemčija
Klic
Prodaja strojev

Ste našli novo napravo? Zdaj staro pretvorite v denar.
Dosežite najboljšo ceno prek Machineseeker.
Več o prodaji strojev
Več o prodaji strojev
Tehnične podrobnosti
- Skupna masa:
- 102.000 kg
- Največja dovoljena obremenitev:
- 73.090 kg
- Konfiguracija osi:
- 3 osi
- Oprema:
- ABS
Podrobnosti ponudbe
- ID ponudbe:
- A19973840
- Št. reference:
- 36908
- Nazadnje posodobljeno:
- dne 12.09.2025
Opis
You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Below is an excerpt from the equipment list. Full specification available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and detachable
* Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4
2-axle compact front bogie:
* Hook mounts at front and rear. Length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Lowbed:
* ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick
* Drive-over bridge hooks at the front and bolt/lug coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 7,150 mm
* Beam height: approx. 300 mm
* Beam width: approx. 650 mm
* Loading height approx. 450 mm with ground clearance of approx. 150 mm
4-axle rear bogie:
* Mechanical pin/lug coupling for attaching a lowbed at the front
* End crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
2-axle front bogie:
* Pendulum axles, all axles hydro-mechanically steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position
* Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau
* Technical axle load: approx. 14,640 kg (62 km/h)
* Hydraulic axle compensation
4-axle rear bogie:
* Pendulum axles, all axles hydro-mechanically steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position
* Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg (62 km/h)
* Hydraulic axle compensation
Tyres:
* Tyres as per manufacturer's choice (M+S) 285/70 R19.5
* Load index 150/148J
Paintwork:
* Entire steel structure automatically shot-blasted after welding process
* Second abrasive blasting with corundum for optimal adhesion of the coating system
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum)
* Final coating with 2 layers of 2K top coat, single color in RAL 3002 Carmine Red according to RAL system 841GL
Including the following accessories:
* Steel front wall, approx. 400 mm high
* Removable ALU side and rear walls for gooseneck, approx. 400 mm high
* 3.5 inch king pin
* Truck hydraulics connection with flow regulator (20 l/min), including gallows for hose suspension
Dcsdpfx Asxbv Aujdhjn
* Tank on tractor unit (SZM) must be at least 80 liters
* With MAX Trailer coupling units, otherwise couplings to be supplied free issue by customer
* BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2
* Multi-coupling hydraulic connectors on gooseneck
* Front bogie with separate air connection for pneumatic screwdrivers
* BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2
* Preparation for mounting bolt-on container positions for 1 x 20' or 1 x 30' on the outer beams
* Without container locks
* Mounting points on the outer beams of the loading platform for foldable extensions
* BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2
* Socket on rear bogie for connection of cable remote control for trailing steering
* Rear bogie with trough
* One LED beacon with bracket left and right on the rear crossmember
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Below is an excerpt from the equipment list. Full specification available on request.
Gooseneck:
* Gooseneck hydraulically liftable/lowerable and detachable
* Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4
2-axle compact front bogie:
* Hook mounts at front and rear. Length: approx. 2,200 mm
* Chassis width: approx. 2,850 mm
Lowbed:
* ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick
* Drive-over bridge hooks at the front and bolt/lug coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 7,150 mm
* Beam height: approx. 300 mm
* Beam width: approx. 650 mm
* Loading height approx. 450 mm with ground clearance of approx. 150 mm
4-axle rear bogie:
* Mechanical pin/lug coupling for attaching a lowbed at the front
* End crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 5,480 mm
2-axle front bogie:
* Pendulum axles, all axles hydro-mechanically steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position
* Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau
* Technical axle load: approx. 14,640 kg (62 km/h)
* Hydraulic axle compensation
4-axle rear bogie:
* Pendulum axles, all axles hydro-mechanically steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position
* Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg (62 km/h)
* Hydraulic axle compensation
Tyres:
* Tyres as per manufacturer's choice (M+S) 285/70 R19.5
* Load index 150/148J
Paintwork:
* Entire steel structure automatically shot-blasted after welding process
* Second abrasive blasting with corundum for optimal adhesion of the coating system
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum)
* Final coating with 2 layers of 2K top coat, single color in RAL 3002 Carmine Red according to RAL system 841GL
Including the following accessories:
* Steel front wall, approx. 400 mm high
* Removable ALU side and rear walls for gooseneck, approx. 400 mm high
* 3.5 inch king pin
* Truck hydraulics connection with flow regulator (20 l/min), including gallows for hose suspension
Dcsdpfx Asxbv Aujdhjn
* Tank on tractor unit (SZM) must be at least 80 liters
* With MAX Trailer coupling units, otherwise couplings to be supplied free issue by customer
* BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2
* Multi-coupling hydraulic connectors on gooseneck
* Front bogie with separate air connection for pneumatic screwdrivers
* BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2
* Preparation for mounting bolt-on container positions for 1 x 20' or 1 x 30' on the outer beams
* Without container locks
* Mounting points on the outer beams of the loading platform for foldable extensions
* BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2
* Socket on rear bogie for connection of cable remote control for trailing steering
* Rear bogie with trough
* One LED beacon with bracket left and right on the rear crossmember
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2003
Pošlji zahtevo
Telefon & Faks
+49 201 8... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake