Balirni stroj

Europress Typ EP 80 V5

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Roll-off container press, 20 cbm usable volume, for hooklift trucks Aventek RM20 Year of manufacture: 2013 Several units available Refurbished, inspected, serviced Large filling opening Divided lid, opens left/right Pick-up on both sides Side-hinged discharge door Ramp operation possible Machines are refurbished, inspected, serviced and repainted in the desired standard RAL color. Bedpfx Afswifivjqodk We will gladly provide a quotation including delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.851 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 500 kg, skupna masa: 17.000 kg, kapaciteta rezervoarja za olje: 70 l, Technical Specifications Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of Manufacture: 2023 Pump Operating Hours: 1,851 hours (as of July 2024) Pressing Force: 70 t (equipped with a 70 t hydraulic cylinder, special feature) Specific Press Force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special feature) Feed Hopper Dimensions: 1,400 x 1,000 mm Theoretical Cycle Time: 13 seconds Bdjdpfx Afou Thbxoqok Theoretical Throughput: 266 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 22 kW Total Connected Load: 65 kW Binding: 4-fold vertical, fully automatic Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 5.5 t/hour - 50 kg/m³: approx. 7.5 t/hour - 100 kg/m³: approx. 9.7 t/hour Bale Weights (at a bale length of approx. 1.2 m): up to 500 kg, depending on material PLC Control: Siemens S7-1500 Operator Panel: Schneider Harmony Press Dimensions, Assembled: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport Weight (Press): 17 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials with small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting "challenging" materials Technical Data for Conveyor: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of Manufacture: 2023 Drive Power: 4.0 kW Belt Speed: approx. 0.3 m/second Feed Belt Length: 2,679 mm Inclined Belt Length: 6,866 mm Gooseneck Length: 1,272 mm Incline: 35° Usable Width: 1,400 mm Sidewall Height (Inclined Belt): 800 mm Cleat Height: 50 mm Cleat Spacing: 750 mm Belt Quality: EP 400/3, 3:1 (DIN Quality N) Overall Height: 4,515 mm Transport Dimensions (overall): 11,148 x 2,502 mm (L x W) Technical Data for Contactless Personnel Protection System: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of Manufacture: 2023 Condition of the Baling System: Due to its low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of Delivery: - Avermann baler, type AVOS 1410 BS-22/50, including wire feeding stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.020 mm, skupna dolžina: 3.300 mm, skupna širina: 5.100 mm, globina grla: 1.060 mm, težka dvostebrična tračna žaga za rezanje visoko legiranih vrst jekla avtomatsko podajanje obdelovanca z avtomatskim prepozicioniranjem CNC krmiljena spremenljiva hitrost podajanja in žaganja trakasti transporter za ostružke opremljena s popolnoma motoriziranimi Weisshaupt valjčnimi progami: - 10,3 metra zunanji dovodni valjčni transporter z 2 hidravličnima vpenjaloma za obrise obdelovanca Bdsdpov Sfp Aefx Afqjk - 9 metrov notranji dovodni valjčni transporter z 2 hidravličnima vpenjaloma za poravnavo obdelovanca - Maksimalna širina obdelovanca: 900 mm - vsak valj je motoriziran - nosilnost enega transporterja je 4 tone - 4 metri izhodni valjčni transporter: en transporter je opremljen s tehtnico za tehtanje obdelovanca po rezanju (Sartorius sistem) Maksimalna višina obdelovanca: 860 mm Hitrost žage: 16 > 80 m/min Dolžina tračne žage: 10260 x 80 x 1,60 mm Potrebna moč: 32 kW (100 A) Teža: 9 ton (samo stroj)

Leto izdelave: 2008, obratovalne ure: 40.000 h, Stanje: dober (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Balenpers: Gewicht: 47.100 kg Bouwjaar: 2008 Hardox bodemplaat alleen Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieregelaar Anti-ratten bekabeling Dieptefiltratie van olie Modem Draaiuren: 40.000 Deze pers kan ook volledig gereviseerd geleverd worden volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de balenpers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Spelingen Na demontage worden de toleranties van alle stalen onderdelen gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende componenten: • Perswagen (ram), • Frame, • Kanaal, • Voordruk-klep (pre-press-flap) Na demontage en inspectie wordt de perswagen opnieuw opgelast en voorzien van nieuwe perswielen. Bodpfx Afskcgf Hsqedk De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. Hydraulische componenten worden herverpakt. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden herverpakt en indien nodig voorzien van een nieuwe chroomlaag of nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (human interface) worden vervangen door de nieuwste Schneider M340 versie inclusief de nieuwste software.

Stanje: rabljeno, !! Kratek dobavni rok, z veseljem vam svetujemo !! Bdedpfx Asu T N Umefqek Preprosta stroj za pakiranje v vrečke, primerna za pakiranje različnih izdelkov. Rabljena.

Stanje: novo, Bunker conveyor system suitable for feeding balers, shredders, etc. Europe-wide delivery available. Technical specifications: Item 1: Feed hopper Item 2: Feed conveyor, 1.5 kW, belt width: 1100 mm, axle spacing: 3500 mm Item 3: Inclined conveyor, 1.1 kW, belt width: 1100 mm, axle spacing: 4700 mm Bododxwlqepfx Afqjdk Standard discharge height: 2800 mm (greater height possible with spacer feet as shown in the illustration) Made to order Further information and data available on request

Stanje: zelo dobro (rabljeno), dolžina brušenja: 3.500 mm, širina na sredini: 5.000 mm, Univerzalni okrogli brusilni stroj. Schehr Meuselwitz. Tip SAXW 1000. Teža 33 t. Razdalja med konicami 5000 mm. Dolžina brušenja 4000 mm. Brušenje v konkavni in konveksni smeri. Skupna dolžina 9,6 metra. Širina 3 metre. Višina 2,4 metra. 380 V. Stroj si je možno ogledati pod napetostjo v obratu prodajalca. Bedjwb Dq Njpfx Afqjdk

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced Bdsdpfx Afou Thhrsqjk - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in operation; test runs possible during inspection; Good technical condition; Folding machine from the renowned German manufacturer GUK, equipped with a high-pile feeder (sheet separation by suction roller from the top) FL2-50, 2 buckle folding units, both with maximum working width of 50 cm, and stream delivery. GUK folding machine, model FA 50/6-6 FL2-50 – feed width up to 50 cm (6+6 folding pockets). Bodpfx Aorx S Iwefqedk Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feeder speed (high-pile feeder): 40 - 180 m/min Maximum output capacity: up to 27,000 A4 sheets/hour Electrical supply: 400 V/50 Hz Machine equipment: High-pile feeder FL2-50; Multifunctional counter for programming machine operation. Possibility to fold sheets in batches (groups) of preset quantity, with stepless adjustment of intervals between batches. 1st folding unit FA 50/6, 6 folding pockets; Soundproof cover for 1st folding unit, top. 2nd folding unit FA 50/6, 6 folding pockets; Soundproof cover for 2nd folding unit, top. Stream delivery S 520; can be positioned after either the 1st or 2nd folding unit.

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 20.536 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, lastna masa: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput rate: 300 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Bdedpfx Asu Thypefqjk Total connected load: 75 kW Tying system: 4-fold vertical, fully automatic Throughput rates (depending on bulk density): — 30 kg/m³: approx. 6.0 t/h — 50 kg/m³: approx. 10.5 t/h — 100 kg/m³: approx. 17.5 t/h Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special features: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk goods of small grain size • Switch cabinet with air conditioning • Machine base raised by 200 mm Note: The machine is currently located in our workshop and is undergoing partial refurbishment. We expect the overhaul to be completed by the end of October, after which the machine will be tested and released for sale.