4-valjnični pogon EUROPA avtomat

EUROPA

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Bcedpewzzzfsfx Abhou Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0153, Specifikacija Europa VS660 Višina središča: 330 mm Razdalja med središči: 1500 mm Obrat nad posteljo: 660 mm Obrat nad prečnim vozičkom: 430 mm Izvrtina vretena (največji premer palice): 104 mm Nos vretena: D1-11 Camlock Bcsdpfjnxi H Uex Abheu Stožčasti sedež v vretenu: Morse 7 Obrat v izrezu: 860 mm Širina vodil postelje: 480 mm Skupen pomik prečnega vozička: 390 mm Skupen pomik zgornjega vozička: 190 mm Skupen pomik tulec konjička: 300 mm Hitrosti vretena (brezstopenjske): 18–1400 min⁻¹ (rpm) Pogon: klinasti jermen in sklopke Motor vretena: 20 KM Palčni navoji (73): 2–84 TPI Diametralni navoji (27): 8–72 DP Metrični navoji (51): 0,2–14 mm Modulni navoji (20): 0,2–3,5 MOD Približna masa: 3800 kg Stroj v imperialni izvedbi Stružnica z izrezom Europa VS660 je na zalogi v Združenem kraljestvu Stroj opremljen z: Fagor 2-osnim digitalnim odčitavanjem (DRO) s CSS (možnost metskega in imperialnega odčitavanja) Trivpenjalna glava Hitromenjalni nosilec orodja z nastavki Hitri električni pomik sani Razsvetljava Hladilni sistem Zaščita za vpenjalno glavo Zadnja zaščitna stena

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism • Replacement of the front two main running rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced Bedpfx Abox Dnb Uohecu • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Europa Centurion CU5 Fräsmaschine mit Ram (vergleichbar mit Huron) Hervorragender Zustand – Besichtigungen jederzeit willkommen! Baujahr 1997 Technische Daten: - Tischgröße: 1635 x 460 mm - Anzahl T-Nuten: 5 - T-Nutenbreite: 18 mm Bcodpfsvm Abrex Abhsu - Abstand zwischen den T-Nuten: 80 mm - Längsweg: 1300 mm - Vertikalweg (Konsole): 440 mm - Querweg (Ram): 650 mm - Mindestabstand Spindelkopf-Tischoberfläche: 40 mm - Spindelaufnahme: 50 INT - Anzahl Spindeldrehzahlen: 27 - Spindeldrehzahlbereich: 30–2050 U/min - Längsvorschub: 10–1000 mm/min - Quervorschub: 10–1000 mm/min - Vertikalvorschub: 5–500 mm/min - Schnelllauf längs: 2800 mm/min - Schnelllauf quer: 2800 mm/min - Schnelllauf vertikal: 1400 mm/min - Spindelmotor: 7,5 kW - maximale Tischbelastung: 1800 kg Abmessungen: L 2010 mm x B 2621 mm x H 1950 mm

Stanje: dober (rabljeno), D&K Europa System B2 Laminator Stroj je 100 % delujoč in pripravljen za uporabo. Ta napredni, visoko zmogljivi stroj je idealen za komercialno laminiranje. Tehnične specifikacije: Največja velikost lista: 540 mm x 740 mm Najmanjša velikost lista: 210 mm x 220 mm Najmanjša gramatura: 115 g/m² Največja gramatura: 400 g/m² Bodpfx Aox N I Tqobhjcu Obratovalna temperatura: 80–145°C Teža: 750 kg Napajanje: 380V Valj iz kromiranega jekla Pnevmatsko vpenjanje, ločevanje in samodejno visoko zlaganje. Natančnost podajanja lista: ±2,0 mm Upravljanje prek zaslona na dotik Modul za poravnavo listov Urejanje izhodnih listov v sklad.

Stanje: novo, Pressure: 100 Bedom Nntyepfx Abhocu Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Bcedsmmuq Iepfx Abhsu Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: novo, Pressure: 100 Motor: 11 Installation height: 500 Max. stroke: 400 Ram adjustment: 790 x 600 Table height (floor to top edge): 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mm Approx. weight: 5,500 kg Oil capacity: 200 DEMONSTRATION MACHINE Year of manufacture: 2023 Type: Hydraulic C-frame press Capacity: 100 tons at 230 bar Control / Key switch modes: - Setup mode – Manual, without light curtain - Automatic mode – Full speed with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 pcs, Ø 50 x 30 mm - Auxiliary guides: 2 pcs, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 liters/min, helical gear pump Speeds: - Advance: 110 mm/sec - Return: 200 mm/sec Bedpfjwrkctjx Abhecu - Pressing phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke: 400 mm - Ram plate: 790 x 600 mm (with T-slots) - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (from floor to top edge) Hydraulic accessories: - Hydraulic control block & components by REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Speed adjustable via PLC - Air cooler - Pre-fill valve - Pressure-holding valve Control accessories: - Siemens S7-1200 control - Main control cabinet - Safety PLC by SICK - Light curtains by SICK (700 mm) - Linear scale for stroke adjustment - 10" BEIJER touchscreen (German & English) - Mobile two-hand operation - Ethernet port for remote maintenance - Fault indicator with light and sound signal - Double work area lighting - Side safety doors (fold outwards) - Hydraulic proportional valves - Dual-channel safety control - Operating manual & parts list (German) - Complies with current EN 693 machinery directives Oil quantity: 220 liters (tank capacity: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint: RAL 7035 Light grey & RAL 7016 Anthracite grey Inspection under power possible on-site in Böheimkirchen 3071 (Neustiftgasse 34).

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections Bcodpfomr Hpcox Abhou The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) With lateral safety door (doors slide to the rear)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, skupna masa: 40.000 kg, kapaciteta rezervoarja za olje: 3.000 l, leto zadnje generalne obnove: 2024, For sale is a used baling press system consisting of a chain belt conveyor for under-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baling press, two complete wire tying racks each with 5 wire spool holders (wire not included). Technical data - Press: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific press force: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Filling volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Tying: 5-fold horizontal, fully automatic Throughput rates: approx. 30 to 35 t/hour, depending on material Hydraulic tank volume: 3,000 l Transport dimensions (press with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight (press): approx. 40 t Remarks: The baling press was partially overhauled in our workshop and fully tested after completion—see our function video for reference. Previously, paper and cardboard from municipal collection were pressed with the system. The operation was reassigned after the contract period ended, so the entire plant is for sale. Bodju Th D Ropfx Abhocu Details of the overhaul and replaced spare parts can be found in the detailed photo documentation and our offer. The full documentation (manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. No liability assumed for technical data or possible errors. Technical data - Conveyor belt: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/minute Feed belt length: 6,900 mm Inclined belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive axle height above ground: 5,777 mm Feed belt wall height: 500 mm Inclined belt wall height: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor, built in 2017, was custom-built and installed to fit the press at its last installation in the Netherlands. The conveyor is in good, ready-to-use condition and has therefore not been overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 x Chain belt conveyor, Wagensveld B.V. 1 x Feed hopper with pre-compactor flaps 1 x Agitator 1 x MACPRESSE baling press, type 111A 2 x Wire tying racks with wire spool holders, without wire 1 x Operating manual with CE declaration, electrical and hydraulic wiring diagrams